Satellite A200 - 14 d don't remember display settings!

Similar Questions

• Satellite A200 suddenly stops showing anything on display

  Hello
  I have been using Satellite A200 for 2 years and it works very well. Recently, I have problems.
  When I use it all of a sudden it stops to show anything on the display but the power to the front lights are still on.

  This problem occurs often. If the motherboard is fried or there is overheating. I gave my laptop for repairs and they said that they had repaired the system board and cleaned the fan.
  But the problem still occurred. If anyone can help me I will be very grateful.

  If the service cannot help I don't know what kind of help you wait here.
  That's the big difference to discuss on a topic if you have laptops in front of you, or on this way where we can only imagine what the problem may be.

  It's really not easy to say why this happens, but there may be a problem with the display cable.
  This happens to you while you work or after display goes OFF mode (set in the power settings)?

• Satellite A200-1BJ: Windows Server 2003 need display driver

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

  My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

  Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  Hello

  Are you looking for the drivers for Windows Server 2003?
  Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

  Win Server 2003 operating system was designed based on windows XP.
  So usually the drivers Win XP should work!

  Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

  Maybe a site www.omegadrivers.net might help you.

  But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
  Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

• Re: Satellite A200-1AX - black and delay image display

  My Satellite A200-1AX is 3 weeks old and its LCD screen has been replaced by Toshiba Center here, to the Kuwait due to defects.
  After placing the new LCD screen I notice that whenever I'm turning on and off the device, a black picture delay appears slowly and disapperaing.

  Can you please tell me if this is normal in appearance as the technician in the Toshiba Service Center told me?

  is there a problem with the installation of the new LCD?
  I find this thing as an abnormal display when booting and the shutdown of Unity State.

  Hope that give you sometimes meet me and best regards.

  Hello

  It very difficult to understand how this question is similar to s

  But to be honest I didn't noticed any delay return image on my laptop
  If I boot the laptop, the Toshiba start screen appears and then after several seconds the notebook starts the Windows operating system. The screen immediately goes from black to blue (windows form). The same phenomenon occurs during the closing procedure

  This issue is perhaps something to do with the first replacement of the screen, but this is just a suggestion

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Vista don't forget display settings; move the second monitor from top right.

  Windows Vista is often (not always) forgotten my display settings for my external monitor.

  I have a Dell XPS M1530 laptop with a NVIDIA GeForce 8600 M GT graphics card.  The laptop is running Vista Home Premium SP2 with all updates applied.  I have a Samsung LCD monitor mounted on the wall above the laptop screen that I use as a second monitor (driven by the output of the laptop).

  I updated the display settings so that my second screen is located above my main monitor. My problem is that Vista often forget this parameter after the standby or hibernation, and returns the value by default display settings of 'second monitor is to the right of the primary monitor'.  This means that I often walk in the display settings to do the right thing (pardon the pun).

  I've seen other messages to try to use 'View to connect' in the settings of Windows Mobile (win - X).  However this option only supports a second monitor is located on the left or the right of the main screen - not on it.

  Any suggestions before I have eventually give up and drill several holes in the wall to mount the external monitor to the right of the screen of my laptop?

  Thank you.

  In my case out of sleep the primary monitor (laptop) is off (still asleep) while the second monitor is on but the resolution is that the screen of the laptop and he took the position of the main monitor. I push the "fn" + 'f4' key to switch between monitors, laptop monitor turns on but the secondary display stands. Another pressure on the keys cause the laptop monitor to be shared and the secondary monitor is now on, that's what toggle keys do. On the third time that the keys have pushed the two monitors came the resolutions they were Setup.

  Try using the ToggleKeys. On some laptops the 'f' key to toggle is "" f5"key. My 'f4' key has the image of two monitors.

  I hope I could help

• Satellite A200 - gel of start and stop display driver

  Hello, I have some problems with my laptop A200 which has little almost 3.5 years.
  The most serious problem is that the computor, lately takes up to 3 attempts for it to operate. or stops on its own even when it is plugged in, it does not regularly, but often enough to be a big pain in the prevurbial, especially when in the middle of an assignment (yes I frequently back up), the fan seems to work ok. I don't know if there is a driver problem which is not showining when I run Device Manager, a diagnosis by toshiba pc diagnostic or an update of direct driver (which has never been required) or microsoft diagnosis. my main line of thought, it's that there is a problem with the extension of file or memory.
  Error extending file Q1 can cause this problem? How to fix file extension problems without spending any money – if possible?

  When I plug in an external display quite often the driver display often stop reesulting in a full freeze that requires the use of the Task Manager or reset by turning off the computor and the bad news of restart - really.
  Q2 How can I fix?
  I've updated the bios and I all current updates.
  The pointers, help etc would be greatly apecieated.

  Hey,.

  To be honest I n don't know why you think about extensions of file if your laptop turns off by itself, it could be an overheating problem. The laptop would be closed to protect the equipment.
  Never clean your laptop before? If you already have for 3 years and a half there a lot of dust in the cooling fans use so jet of compressed air to blow out the dust.

  Regarding your second question: have you installed most recent display of page download driver Toshiba driver? This is important because Toshiba display drivers are pre-tested and designed for this model. So they work correctly and no problem to don t.

  I hope I could help you a little bit ;)

• Satellite A200 - 1 MB don't wake up on hibernation

  Help, please.

  I was using my laptop for over a month and I can't use the hibernation mode... I can't turn on my laptop when it goes into hibernation mode. The power light is blue. Is there a keyboard sequence that I have to type?

  I use Windows Vista Home Edition.
  Thank you.

  Hello Ina

  How, you switch to hibernation mode:
  -close the lid of the laptop
  -using the FN + F4 key combination or
  -using the button on the start menu?

• Satellite A200-196 - create a CD factory restore settings

  Hello

  Just bought a used computer (Equium A200-196) and want to restore it back to factory settings. Am a little nervous to do it without the restore disks.

  * Is it possible to get a restore CD from the restore settings already on the computer *, just in case it does not work!

  Or should I just bite the bullet and go?
  Any help or advice would be greatly appreciated.

  Hello

  Well, if the Toshiba recovery disc creator is preinstalled on your laptop and the HARD drive recovery image files are available on the second partition, then you will be able to create the Toshiba recover disc.
  In addition, you can also try to recover the laptop using the recovery of HARD drive option.

  For more information, check this:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If the two would not work, then you can order this disk to recover from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A200 - how to replace the HARD drive?

  Hey, I recently some strange problems with my laptop. I installed a new copy of Windows Vista and also tried with Windows 7 a few times. But eveytime I get problems. The installation of the operating system right. But after I installed some Windows updates my computer becomes very slow and at some point, I am unable to install any application, because it crashes just when installing... This happends with all the big software products such as Visual Studio, 3d Max, After Effects... etc.

  So I think that my HARD drive has a large number of bad sectors. I also tried to erase everything on my drive with KillDisk, but it hangs at 16%. Once again something that seems to be my HARD drive.

  But before you buy a new, I'd like to hear your opinions on my problem and I would also like to know how I have to replace my HDD on a Toshiba Satellite a200. I don't know where it is placed and what parts I need to unscrew.

  Thanks for any help.

  Hello!

  The HARD drive is placed on the underside of the laptop.

  The HARD drive on the underside Bay is fixed by two screws. Remove the screws and the HARD drive. Then you can swap the HARD drive.
  But unplug the AC adapter and remove the battery before doing this.

  The new HARD disk must have the SATA interface.

  Good bye

• Memory Stick Pro DUO is not in my Satellite A200 - 1 H 2

  Laptop computer most I want to set up my Memory Stick Pro DUO inside the laptop, but not this one, it can t happen so I tried to put the Memory Stick Pro DUO in one of these adapter Memory Stick DUO that accompany it, and although it does not connect, nothing happens...

  What is c? Why can't t my laptop does not recognize it? Doesn't it support?

  Hello

  I don't know what you mean with most laptops, but it is logical that each laptop producer offers very precise specifications where you can read about the compatible memory cards that can be used with multi card reader.

  Have you checked the user's guides document for your Satellite A200? I don't think so.

• How to change the brightness of the screen on Satellite A200 on Vista

  I have a problem with the brightness on my Satellite A200 - 14 d in vista, the default settings have very high brightness and when I change the brightness after a reboot there are default settings... (VGA is GeForce 7300 go)

  As far as I know there is nothing strange. The same thing was happening to me. If you want to have the brightness of the display on the lever of the lover all the time, it must be changed in power options. Please select your preferred profile (symmetric for example) and set the LCD brightness to the lower level.

  It works for me.

• Need driver Geforce Go 7300 on Satellite A200-10 x

  Hello

  1.5 year ago I buy this Satellite A200-10 x laptop with Vista (32 bit) and Geforce go 7300. Now I can not find the drivers for this graphics card
  Why? It has not supported model?

  I have a lot a problems with the display driver:
  -sometimes bluescreen
  -sometimes black screen
  -Everytime: there is no possibility of playing any game.

  I am looking for good driver a few months and I'm not.

  can someone help me, please?

  /CROCart

  (Sorry for my bad English)

  Hello!

  I put t understand this problem to find a driver. On the Toshiba driver download site, you will find a driver for your Geforce 7300. Did you look on it?

  Here you'll find the driver:
  http://EU.computers.Toshiba-Europe.com-online laptop => Satellite-A Satellite-Satellite A200 PSAEC-Windows Vista 32-bit-Display Driver online online online online

  What blue screen do you have exactly? Maybe it s is not a problem with the graphics card.

  Bye!

• Satellite A200-23U - strange Grapich/display problem

  Hello

  I have a Toshiba Satellite A200-23U and it has a problem... sometimes graphics seems worse suddenly or are destroyed. A simple reboot can operate correctly, but it is very possible to reproduce... when I say that the graphics are getting worse I mean the resolution becomes a little bit worse, and the colors are unacceptable... some waves are created and the areas that were almost of the same color before the problem are now surrounded by a ring-wave , they have only one color with no shading and a few white spots are in these areas... after the restart, everything is ok...!

  I think the problem happens when the laptop is hot, but I'm not sure because he appeared also when the laptop was working only a few minutes in a cold environment and sometimes the device can be turned on for long hours and very hot, but the problem does not appear... Where did you think is the problem?

  The possible reasons, I can think of is the monitor or the cable that connects the graphics card with the monitor. Another reason that I n t think it's quite possible is the graphics card. I think this is less possible because if the problem exists on my laptop and I connect to another external screen as my TV, the problem still exists on the screen of the laptop, but the image on the external monitor is perfect...

  I'm ready to put new and bigger (2 GB I'll put 4gp) memory ram because the graphics card uses the RAM and the RAM is very high work when I play a game or watch a move.

  Do you think it will help or solve problems? What do you think I could do?

  Hi John

  What then? As I see you have good test connect your laptop to the TV. Always is that this test can help you see if the problem can be related to the graphics card, but if there is no problem graphics card is probably OK and this graphic problem must relate to something else.

  Of course, this virtual path, no one will be able to offer the exact diagnosis and say what can be the problem and we can only speculate what part of the material may be troublemaker.

  In my opinion there must be a problem between the motherboard and display. I don t think that the display is faulty, but perhaps the cable must be exchanged, perhaps connector on motherboard make problems. It is not easy to say what to do.

  Fact is that analysis only offer exact answer so I think you need professional help with this.
  Maybe you should contact the closest service Toshiba and ask for help. Let them check it all and ordering new parts if necessary.

  I put t think that you want to risk and disassemble the laptop everything yourself, have you?