Satellite A200-1AE: Toshiba hardware utility - "serial number is invalid '.
Dear Sirs,
I have install Vista Business on my A200-1AE (origin, it was the home of top). I have install all the drivers except TOSHIBA Hardware Setup Utility. Then I try to install it says 'serial number is invalid '.
Help how to install it and what can be a problem?
Hello
To my knowledge, this error message might appear for different reasons.
First this error by using applications that was not designed for this series of laptop.
Satellite A200-1AE belongs to the PSAECE series. Have you downloaded the tools and drivers for this series?
Please check this!
Second, the error of incorrect serial number appears if the wrong DMI information was stored on the system board.
This could happen for example if a technician has not updated the DMI after a motherboard replacement.
Finally and above all, it s that you have not installed all the drivers and applications in the right order.
You must check the installation instruction txt file and need to install the drivers in the order mentioned in this file.
Good luck
Tags: Toshiba
Similar Questions
-
Issue of Satellite A200 - 1 GB PSAE6 Flashcards - serial number is invalid
Hi all.
I need help with something for my sore head... :D
Today, I had to turn to the zone updates and to see a newer version for the Flashcard, so I donwloaded and install, but now start problems...
at the start of the installation it says that need to uninstall the old version, then ok I accept, then restart and exec that the flashcards program installation, but now I get error "serial number is invalid '. I come here looking for a solution and read that I have to reinstall the VAP (I had installed the version of vap-20080109135106).
Before the error windows if poster, a DOS window opens and closes automatically with this message from command line: "connected to the ROOT\CIMV2 namespace", while the error comes: S
Again once I uninstall the VAP, restart, clean with ccleaner, reboot, reinstall the VAP, restart, install the most recent Flashcards... surprise and... again the same error... The serial number is not valid
I tried all the steps once again and get the error more another time.
For the third test, I just installed the VAP and seen that the included flashcards have been installed and working... but not so easy... they don't work when you press the combination FN + Fx only works if I move the mouse over them... exactly the only combinations of work are the FN + F10 & FN + F11.
The FN key works, because as I said before the two combinations and the green light when you press ok blinks.
So now I have a VAP flashcards who (not upgrading) works only with the mouse or touchpad click. If I press FN + something nothing happens (except the F10 F11 keys).
Goin whats here? I am really frustrated with this happen.
PS: I am sure that the version of updates are just pattées portable model...
I also tried to install version olders flashcards and PPV that I had on a backup driver cd and nothing happens, the same situation and erros... (FSCC-20080307104403 & FSCC-20070809135810)Please I need something :D
Please anyone who can help?
Post edited by: ADMIN
-
Satellite A200-1AE: Toshiba Disc Creator and DVD MovieFactory missing after update
I've updated Toshiba Satellite A200-1AE from Vista Home to Vista Enterprise, but now I can't find TOSHIBA Disc Creator and DVD MovieFactory for TOSHIBA software.
No idea how to get this software?
Thanks, Bojan
It seems that your Vista upgrade crashed the previous settings and therefore applications such as TOSHIBA Disc Creator and DVD Movie Factory has disappeared
You search anywhere?
-
Satellite A200: How to find the serial number
I need to know the ETA of my laptop so I can download the specified drivers...
Cause when I did my search, there are several version of the SATELLITE A200...
If anyone can help out where I can find it?Thank you!!
At the bottom of the unit, you will find the label that provides all the necessary numbers.
You will also find the serial number! -
Satellite A200-1AE - serial number incorrect hardware configuration
TOSHIBA Satellite A200-1AE
short model No.: PSAECEVersion: Toshiba Windows Vista 32 bit - hardware 1.48.0.9C
I try to install and say the wrong serial number?Can I fix?
You have a version of BIOS for Vista on your A200 PSAECE?
What version of Vista are you using? It is the ultimate?
-
Satellite A200-1AE (PSAEC) - when the new update would be available
Hello.
I have Toshiba Satellite A200-1AE (PSAEC) and the latest BIOS is since 2007.
Toshiba means update?
I think that old "deserts" Toshiba series and that he cares only for new.
Unacceptable
Hi mate
Why should Toshiba BIOS update?
There's a problem with your laptop that should be solved by the BIOS updated?To be honest, I don't know if the new update of the BIOS would be available for an A200 but if something would not would be not wrong with the old BIOS Toshiba provide an update
One of my friends has a laptop A200 and its working properlyWelcome them
-
Re: Satellite A200-1AE does not work
Hello!
I have Toshiba Satellite A200-1AE computer that does not work.
I use (d) for educational purposes and now the problem is that it will display no signs of life. the blue led light on the front of it does not illuminate when I connect it to the AC/DC adapter.
I tested the AC/DC adapter with a voltmeter (it came with the computer in the box of the card when I bought the computer) and it works well.
Yes, the battery could be dead also, but it should work just fine without it and is not.
What to do about this problem?
He has a dead motherboard? No, I can't be brave enough to think about.
Help, please.
Thanks in advance for your reply,
Goran
Hi Goran
Everything is possible... also a dead motherboard.
But to make sure exactly what s laptop computer checking is necessary.So, you will need to contact the ASP in your country for the control of the laptop.
Good luck
-
Need driver for display for Satellite A200-1AE
Hi all
I'm looking for driver for Satellite A200 1AE disply.
The card on this computer is the NVIDIA GeForce Go 7300 card.
No sign of this model in the Toshiba Web site for drivers and Nvidia didn't send me to the Web from Toshiba site.What can I do?
Help, please!
Voodoo
The laptop belongs to the PSAECE series
I checked the page European driver of Toshiba and the display driver is available.I would recommend so visit this site for the compatible driver.
Man Bye
-
Satellite A200-1AE shows only 3 GB instead of 4 GB of RAM
First of all the http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm * Help *.
(Come on security start-Control Panel of configuration-system-configuration-boot system Administrative Tools - Advanced options, make sure the maximum memory of the option is not checked. If it is checked, uncheck, press on apply, Ok and restart). -* not working *.I've got BIOS, Windows 7 64 bit v1.4
BIOS see 3 GB (BIOS available on the toshiba Web site is for win XP and Vista only)
Windows 7 see 4 GB but 3 GB usablePlease help, thanks.
Satellite A200-1AE (http://ce.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?LNG=20&service=CE&BV_Us eBVCookie = yes & PRODUCT_ID = 127556)
Hello
to be honest, this problem is one of the most annoying problem as the failure of Bios in this forum.
> BIOS see 3 GB (BIOS available on the toshiba Web site is for win XP and Vista only)
I think that problem is in the Bios, it does not recognize the 4 GB, but only 3 GB.
-
Satellite A200-1AE cannot find my disk hard flash
Hi to everyone.
I have a SATELLITE A200 1AE and I have a little problem...
My phone cannot find my disk hard flash. I contact toshiba here in Greece, and they told me that they don't know what to do!Can you help me please?
THANKS ANYWAYYYY
Hello
Can you please write a little bit more kill your issue? Since when you noticed this problem? What did you do last time? Maybe installed WXP and now the HARD drive is not visible for the BIOS or does not appear when you use F12 at startup?
Please write a little more. I don't think that the service can't do anything.
-
Is this ok to change the fabric on Satellite A200-1AE to XP Vista?
Hello world. Please, who can help me and explain, is it posible to change fabric Vista on Satellite A200-1AE XP and how it can affect mobile?
Hello
If you want XP, so feel free to install it. He won´t affect your machine, you worry so Don t. :)
But before that, check first if you can find drivers for your machine at the pilot site of toshiba:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jspBefore installing a new system on your machine, make a biosupdate and use XP to update your bios - not Vista.
I hope I could help you, if you have more questions, just ask.
Welcome them
-
Is it possible to replace the processor on Satellite A200-1AE
Is it possible to replace the processor (T5500-> T7500 T7700) on the Satellite A200-1AE?
You want to do this? Are you not satisfied with the performance of the laptop?
-
Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?
Hello
I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.
Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.
My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?
Thanks for your help!
p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.
I don't know where are these properties.
Hello
It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
It could be that the button is not named as mine, but it must be identical.
After clicking on it, you should look for this 'easy' Launcher in one of the tabs.I think that you will make it, but I'd like some feedback from you.
Welcome them
-
Satellite A200-1AE does not recognize the USB 2.0 flash drive
I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
The same USB works without problem on other computers with vista!Someone knows what to do?
Hello
First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches
Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.
Best regards
-
I downloaded on my new computer suite Design Premium 5 and it says that my serial number is invalid
I downloaded on my new computer suite Design Premium 5 and it says that my serial number is invalid
Hi Kates,
Please visit error: "serial number is not valid for this product". Adobe Creative Suite
It will be useful.
Kind regards
Shelly
Maybe you are looking for
-
Thunderbird to interface with Gmail
Google has recently installed a two step authentication process; without thinking, since I use a number of Google apps, I installed it that now blocks Thunderbird which I largely used. I tried to find a way to remove the authentication in a two-step
-
I can not delet my wanted United Nations send and return to my other email
When I go into my email. I can't delet them or my own Junk. I have also two msn more and I can not get it please help. Thank you
-
Why can't I find Bit Locker on the laptop?
Original title: I can't find BitLocker in my laptop . I ve windows 7 home basic OS. If I go to control panel-> system and security control, I can't find BITLOCKER... How can I activate it?
-
How to clear the log of events on my hp m1217nfw?
Hello world! Is there a solution to clear the log of events on my hp m1217nfw printer? I do not know how... Thanks in advance CYANOACRYLATE GLUE
-
HelloHow to import dbf files in an oracle databaseI tried,IMP infa_repr/sys datafiles=(D:\orderm\sse_samp.dbf')but does not workThank you