Satellite A200-1AI just beeps at startup

Satellite A200-1AI (PSAECE) does not start, only 4 beeps: a little long and 3.
Help, please

Hello

I think, there is a video card failure, that is why the laptop can not start. The video card is integrated into the motherboard, and you have to replace the whole motherboard

Tags: Toshiba

Similar Questions

  • Satellite A200-1AI - Windows has detected the hard drive error

    Hi guys.

    I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

    I guess that's only a matter of time before things get more serious.
    Its just now that it unattached restarts automatically.
    Ive gave my laptop below specifications and the specifications of the hard disk drive.
    I do not know which drive hard im supposed to be looking at.

    I don't want to buy one and then duty send because its incompatiable.
    Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

    Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
    Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

    MODEL NAME: Toshiba Satellite A200-1AI
    MODEL NO.: PSAECE-00U00JEN

    HDD SPEC:

    TOSHIBA MK2035GSS HARD DRIVE
    CAPACITY: 200 GB
    CERTIFICATION: S.M.A.R.T
    DrRIVE ROTATION: 4200 RPM

    Hello

    The Satellite A200 supports the SATA HDD controller.
    That's why you need to buy a SATA 2.5 HARD.
    The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

    SATA controller not limited to any size of HARD drive, you can also use large drives.

  • CD/DVD is not working properly on the Satellite A200-1AI

    I have a Satellite A200-1AI but it can't find the CD/DVD.

    The operating system is Vista Home premium. The control panel highlights the problem that
    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

    The CD/DVD is HL-DT-ST DVDRAM GSA-T20N ATA Device.

    Any ideas?

    Hello

    It's three different error messages Windows which could occur if the registry entries have been modified or damage.
    This can occur as a result of the application of part 3 or after deleting a record of program or a program DVD of CD recording, or after you remove a different program.

    Anyway, you have several options to solve this problem;
    Either you will reinstall the whole OS (this is not advisable ;)), either you will follow this ;) described Microsoft instructions here in this document:
    http://support.Microsoft.com/kb/314060

    Please post again if you have managed or not

  • Satellite A200-1AI - start system problem

    I have a problem starting with a model A200-1AI. When I press the power button on the laptop the power light turns blue and the hard drive light flashes blue for a second and then disappears. And now the CDROM drive light steady green. Nothing appears on the screen at all and there is virtually no noise coming from the laptop.

    I tried the following, but the same problem persists

    -Remove battery for at least 5 minutes and then re-inserted
    -Battery removal completed and started directly via the mains
    -HDD reconnected
    -RAM reconnected, in all possible combinations (one RAM module with the other out has left and exchanged by the two bays of RAM)
    -Reconnected all major components connected to the motherboard, basically, I have removed the keyboard and reconnected everything I could find just to make sure that all connections are in place
    -Connect an external monitor
    -Open the CD drive manually to make sure nothing is stuck

    As the hard drive light flashes it seems to indicate a failure of the HARD drive but I expect at least the machine to enter the BIOS and can report a HARD drive failure? It seems to indicate a failure of a component somewhere but I would like to see if anyone else out there, maybe he knows a mother board failure?

    Any help or pointers would be appreciated :)

    Hey Buddy,

    Unfortunately, I think that Akuma is right and I think you've tried everything you can do, this issue seems to be a hardware malfunction and you will need to contact an official authorized service provider:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

    Here it s only a user forum user where you can talk with normal people like you and me, so nobody is able to give you detailed repair instructions.

    So you in contact with the technicians of the laptop. I'm sure they can help you and it s interesting to talk with them. :)

  • Satellite A200 freezes / restarts randomly on startup

    Hello

    I have Toshiba Satellite A200, Windows Vista Home Premium SP2 6.0.6002.
    Intel (r) Core (TM) 2 Duo CPU T5450 at 1.66 GHz
    Video ATI Mobility Radeon HD 2400 version = 8.380.0.0
    Audio version of Realtek High Definition Audio = 6.0.1.5406
    Network Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller version = 10.0.4.3
    Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.5.0.32

    For the two weeks... my laptop randomly freezes / restarts... especially when it is started for the first time in the day OR after being in standby / hibernation of State for a few hours.
    Sometimes it gets stuck before we get to the login screen... sometimes shortly after... no certain activity seems to be related to this gel. And it's not freezing all the time... sometimes it restarts too. No blue screen.

    No new software installed, except regular updates of windows. No conflict in the device driver. I checked the website of toshiba for the latest drivers. BIOS had a newer version... So I installed which (2.5). But the problem has not disappeared.

    When the computer reboots, it works fine... I'm not able to find something to worry about in the event viewer. Start logging also came not to the top with a few errors. I also disabled the option restart automatically.

    Windows partition was low on space... only 6 GB left of allotted 40 GB... so I thought to backup and install from scratch... do that... all the updates that are installed during the next days... but my laptop is back to the same State. One thing I notice, is that now it takes longer after starting (and then restart) to connect to the wireless router. But this isn't a problem.

    Microsoft Fix It didn't help either... am looking for help to identify the cause and resolve it.

    Is there a conflict somewhere which surfaces while system is booting high / shortly after startup?

    Thank you in advance.

    > How we can say is that there is nothing wrong with the equipment? What else can a check?
    The new installation of the operating system has not helped. Right?
    So for me it looks like hardware related issue.
    I think the disk HARD or RAM (memory)

    The HARD drive can be easily verified. Download the drive diagnostic tool called HARD: Drive Fitness Test
    It s freeware tool and it allows you to scan the HARD drive and get details on possible malfunction.

    The diagnosis of RAM can be done easily. Of course, there are tools like memtest86 + and similar, but in my experience the results of the analysis are not always 100% right
    So, in that these cases it s always a good idea to test the laptop using new tested s RAM

  • Satellite A200 - 23Q - cfixer window at startup

    Hey guys!
    I hope someone can help me.

    Whenever I turn on my laptop (I have the Satellite A200 - 23Q) when my desktop appears at one point it breaks and I get the "cfixer" window pops up saying that it cannot find the cfixer file, and there is also a date when the file is deleted (it's always today's date, the date when I have my computer on). On the bottom, I have to cancel, try again or restore. When this happened for the first time, I clicked on restore, but it happened again the next time I was starting so I guess it's a virus so since then, I always click Cancel. But it happens for 3 or 4 months now and it annoys me reallly. When I get rid of this window continues startup, load the bar side, bluetooth and other programs.

    Help, please! Is it possible to settle this issue without having to reinstall the operating system?

    Thank you in advance!

    Hello!

    If you reinstall ConfigFree utility that you can t do something wrong, but this .exe file at startup belongs to this tool and so you should try to reinstall.

    Try it and post your result. Relocation of this tool only takes a few minutes and should solve your problem. :)

    Good bye

  • Satellite A200-1AI (PSAECE) error using Toshiba Disc Creator

    I have an A200-1AI (PSAECE) running Windows 7 Ultimate 64 - Bit with 3 GB of RAM and a TEAC DV-W28ECT Combi drive...

    Whenever I try to create a CD/DVD or anytype of media using Disc Creator, I get the error messages 6 or more: -.

    An unexpected error has occurred.
    32007C-26-00000001

    This error message appears 6 times, when I run the software and select Audio or data.
    Then the window file transfer normal 6 tracking software-related the same error messages and the software is unable to burn anything... When the software is closed, it does so with 6 error messages more before closing...

    The laptop is installed with Vista 32 bit and I formatted the computer before installing Windows 7 64 bit as a clean install...
    There were no problems at any time during this process, the laptop infact has been better than ever... so far :)

    I already had 10 Roxio installed in my burning software, but I couldn't get along with it if he took off for Toshiba Disc Creator (as it's FREE!)
    Media Player and Windows itself also consumes CD ok...

    I can provide more information if necessary.

    Hi mate

    May I ask where you got the creator of Toshiba drive for Win 7 64 bit operating system?
    I checked the European driver of Toshiba page and there is nothing in the box Satellite A200.

    In my view, the error message is displayed because you use software that is not compatible with Windows 7 installed.

  • Satellite A200-1Ai: how to get the digital multimedia card slot to work?

    How can I get my slot of multimedia digital maps to work on my Satellite A200 laptop 1Ai?
    I tried inserting xD card and it won't read or find the driver software

    First: installed all the drivers and so on? It's really important. If you haven't already done so go on the toshiba driver download site and download them.

    Otherwise, follow these instructions:

    Go to your control panel and open the administrative tools. After their opening, go to services, then the service 'smart card '. Start and 'activate' service to make your card reader work.

    It should help, if not give a few short comments here.

    Welcome them

  • Satellite A200 has multicolored screen on startup

    Hello
    for a month I have a satellite A200, I have had not less than 5 times
    to initialize the bios, a filled with multicolored lines loading screen before.
    I have to just press the power button in standby mode to fix but...
    I would like to learn more about this problem
    Thanks in advance
    Pier

    Hello

    How many times does the error appear? Were the machine in unusual conditions as too hot environment or has some liquid on it or something?
    If this isn't the case, then it might be a serious fault that must be fixed by an authorized partner.

    Please give some feedback and tell me where the machine has been used and what conditions and so on.

    Would appreciate some reactions :)

    Welcome them

  • Satellite P300 - 13 M - beeps at startup

    Hello

    My laptop now and then beeps at startup and then I get a black screen (and can't do anything)
    The beepingsounds goes as follows: BEEEEEEEEEEEP BEEP BEEP (1 x long - 2 short)

    Anyone know what this could be?

    It is very annoying when I want to show my client project and all of a sudden the laptop no longer works...

    Thnx in advance

    Raey

    Hello!

    Beep codes mean that there is a faulty hardware component.
    It's not easy to tell what is the reason for this, but in your case I would try to exchange the RAM.

    If it doesn't work you should contact an ASP and ask for help. Technicians can check your laptop and exchanging all the necessary parts.
    On the Toshiba site, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite A200-1AI: big screen when using a digital projector with display 4 x 3

    I have a Toshiba A200 - 1AI with Nvidia Geforce Go 7300 graphics, the laptop has a 1280 x 800 display. When a digital projector from here/more 1024 x 768 is plugged and the option value to display on display devices, changes in laptop to 1024 x 768 and will stretch to fit the screen, the projector is perfect.

    I prefer the laptop to show no deformed with a black bar on each side of the screen. There is an option in the Bios, which suggests that it is possible and indeed when the value of the bios displays this way without distortion, hoever when Vista starts up, it is up to the extended format.

    Is there a way to get around this.
    See you soon
    Nigel

    Hello

    Did you record the settings in the BIOS after changing this display option?
    Please don t forget to do!

    But if you have saved the settings and the display stills change resolution of 1024 x 768 stretched, then you should check the graphics features of nVidia in the control panel of the Vista operating system.

    Go to the NVIDIA Control Panel and check the Advanced view.

    Good luck

  • Satellite Pro A200: A continuous beep on startup top and freezing

    Hello

    It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.

    But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.

    Sincerely, waiting for the answer...

    Verhoeven...

    Hello

    To be honest, it's very strange question. What is some external device connected to your laptop?
    Have you tried to update the BIOS to the latest version?

    Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
    Maybe you should contact the closest service and ask what it can be.

  • Satellite Pro 6100 - code beep at startup

    Hi all

    Just picked up a 6100 Pro of the Satellite with a few problems.

    It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

    I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

    Ta

    Hey Buddy,

    To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

    You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

    If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
    Second hand spare parts you can get it on eBay s worth a try! ;)

  • Satellite L655 - 14 X beeps at startup

    Hello

    When I start my Toshiba Satellite L655 - 14 X (Version 2.40 Version 1.80 THIS system bios InsydeH20 bios) at each start of the 'Starting Windows' screen it beeps without stopping.

    I wanted to just reinstall Windows7 format is the same.

    Could you please help me quickly?

    Thank you.

    Message was edited: assignment has been translated

    Disconnect all external devices. Then switch on and press F2 to enter the BIOS.
    Then set the default BIOS and save the changes.

    If you want to reinstall Win 7 system, I recommend you to use the Toshiba recovery disc. The drive would set the notebook back to factory settings.

  • Upgrade CPU on Satellite A200-1AI

    I just I don't know if can upgrade the CPU myself, and if yes what CPU do I need to get.

    I hope someone can help!

    Thank you

    Before we start discussion please read this Toshiba document > http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

    In General, the CPU upgrade is not supported. Each hardware platform is designed to operate with optimal cooling system.

Maybe you are looking for

  • Does anyone can diagnose this EtreCheck for me?

    MacBook pro running very, very slowly. Does anyone can diagnose this output EtreCheck for me? Hardware Information: ⓘ MacBook Pro (13 inch, late 2011) [Data sheet] - [User Guide] - [warranty & Service] MacBook Pro - model: MacBookPro8, 1 1 2.4 GHz In

  • Satellite click 10 LX0W-C64 battery 2: not available to use

    Hello guys. First of all, sorry for my bad English, Im from Ukraine because. Second, maybe who knows how to activate the second pile of the keyboard docking station? PLS, help.

  • Windows 7 taskbar hidden

    All of a sudden, I can't have the Windows 7 taskbar to show when I place the cursor at the bottom... What could be the causes?

  • Search index in a table 2D in a range

    Hello. I have two tables 2D (9 x 9) and I would like to find clues of an element that is within a specific range. For example, ±15% of the value I'm looking for. I found and implemented research Array.vi 2D, it works well, but it is possible to confi

  • Not printing color (only BW) when using PSC 1610 Pro Mac OS x 10.9

    PSC 1610 attached to the Mac Pro OS x 10.9 for the first time (printer was already used successfully with Snow Leopard on MacBook). First, I changed the ink cartridges. Test the printer print is successful and shows the colors. Printing a photo or a