Satellite A200-1AI: keyboard missing letters when I type

My keyboard seems to be missing a few letters when I type them. I have to type very slow to make sure that all the letters reach the screen. Any ideas?

Hello

The same thing happened to me. I use an old notebook and the problem has been resolved by the BIOS updated.
It seems you laptop computer A200 is a series of very new and not very long on the market.
That's why I put t think that new BIOS is already available.

Take a look at the Toshiba page from time to time, and perhaps the new BIOS will be available.

Best regards

Tags: Toshiba

Similar Questions

  • Satellite L750D-14R - keyboard missing letters when you type

    I recently bought a laptop L750D-14R and he has problems with the keyboard completely ignoring letters when you type.

    If I type any faster than the pace of 1 finger of each hand, and then I can abandon typing altogether.
    If anyone else has had a similar problem and if so is there a solution?

    Hello

    Yes, I know that this question.
    As far as I know that this has been fixed by the updated BIOS

    See the European driver of Toshiba page and download the latest BIOS for your laptop model.
    Update the BIOS and check how it works.

  • How can I stop my laptop keyboard jump letters when I type

    How can I stop my laptop keyboard jump letters when I type

    Hello anitadaniels,

    In Control Panel, click the mouse/keyboard.
    Check on the sensitivity of the mouse, which makes it not so sensitive.

    Let us know if that helps.

    Marilyn

  • Missing letters when you type on Satellite M105

    I use a Satellite M105-S3084 (Windows XP MCE) and fighting in vain with a keyboard problem since I bought it first. I tend to type fast, especially the double letters and find that very often a single of double letters appears on the screen. For example, 'kk' translate to 'k' only and the similar missing letters even if not doubled. This causes a lot of waste of time correcting what I type.

    I know that there are parameters under control Panel\Keyboard ("repeat delay" and "repeat rate") which allow the adjustment of speeds, but I found the frustrating to use. I tried both with different settings and still have a problem with the missing letters. Maybe I don't know how to define that, and I just get frustrated, or there is another bet in another place which I do not know.

    Others have had this problem with the mising letters while typing and found a solution?

    Thank you.

    Hello, Jeff

    If I'm remembering right, there was a similar problem with the Satellite L10 and L20, I don't remember. This problem has been fixed with the new version of the BIOS. US models of laptops are not known to me, but if you have time you can check IRIS ask on the page we Toshiba. You will find many interesting documents.

    Check it out under the http://askiris.toshiba.com/ToshibaSupportSite/supportcentral/supportcentral.do?id=m1

    Maybe you will be lucky and find something on your problem with the keyboard.

  • Satellite P300-22R - missing letters when you type too fast

    Hello!

    I found a lot of articles about my problem in the internet, but I have not found a solution

    My keyboard on my P300-22R ist no longer works. If I write a little too fast, there are a few missing letters or they come twice.

    I already read the http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm of Toshiba, that I should install a BIOS update to fix the problem. The update of the Bios was a success, the inexplicable laptop properly. But it doesn't seem to work so far. Still a few letters are missing.

    Do you have any other ideas? It's really boring, write a text like this: Pei

    Do you need information more?

    Thanks for your help!

    >... ist no longer works
    How to understand this? And in the past, everything was OK?
    What operating system do you use?
    When you type a little slower is there a difference?

    To be honest this problem on P300 is not known to me because I've installed on my Win7 32 bit a year ago and so far all brothers works perfectly.

  • How can I stop my laptop keyboard jump letters when I type an email?

    my keyboard letters are jumping letters as I type only when I type an e-mail. How can I prevent this accident?

    HI anitadaniels,

    If it happens only in Gmail, then I suggest to go through their support:

    http://support.Google.com/mail/?hl=en

    Thank you!

  • Satellite L670-1J0 - keyboard missing letters guard

    Hello.

    It started to happen a few days ago and I recently bought this laptop about 4 weeks ago. Anyway, whenever I type, keyboard guard running out of letters, symbols, and spaces. It doesn't seem to be a pattern whose lettters etc. are left out. It looks like a delay between each letter while typing / keyboard is slow to respond.

    Any ideas?

    Thank you.

    Hey,.

    I think that in this case why you use an older version of BIOS. On the Toshiba Web site, there is an update to resolve this problem:
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    But I m wondering about your question. Have you done a search forum before? I found a lot of discussions with the same behavior and update the BIOS has always been the solution for this problem:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=231488𸡀
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=231493𸡅
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=236329𹬩

    Check this box!

  • Satellite A200-1AI - Windows has detected the hard drive error

    Hi guys.

    I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

    I guess that's only a matter of time before things get more serious.
    Its just now that it unattached restarts automatically.
    Ive gave my laptop below specifications and the specifications of the hard disk drive.
    I do not know which drive hard im supposed to be looking at.

    I don't want to buy one and then duty send because its incompatiable.
    Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

    Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
    Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

    MODEL NAME: Toshiba Satellite A200-1AI
    MODEL NO.: PSAECE-00U00JEN

    HDD SPEC:

    TOSHIBA MK2035GSS HARD DRIVE
    CAPACITY: 200 GB
    CERTIFICATION: S.M.A.R.T
    DrRIVE ROTATION: 4200 RPM

    Hello

    The Satellite A200 supports the SATA HDD controller.
    That's why you need to buy a SATA 2.5 HARD.
    The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

    SATA controller not limited to any size of HARD drive, you can also use large drives.

  • Satellite A200-1AI just beeps at startup

    Satellite A200-1AI (PSAECE) does not start, only 4 beeps: a little long and 3.
    Help, please

    Hello

    I think, there is a video card failure, that is why the laptop can not start. The video card is integrated into the motherboard, and you have to replace the whole motherboard

  • CD/DVD is not working properly on the Satellite A200-1AI

    I have a Satellite A200-1AI but it can't find the CD/DVD.

    The operating system is Vista Home premium. The control panel highlights the problem that
    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

    The CD/DVD is HL-DT-ST DVDRAM GSA-T20N ATA Device.

    Any ideas?

    Hello

    It's three different error messages Windows which could occur if the registry entries have been modified or damage.
    This can occur as a result of the application of part 3 or after deleting a record of program or a program DVD of CD recording, or after you remove a different program.

    Anyway, you have several options to solve this problem;
    Either you will reinstall the whole OS (this is not advisable ;)), either you will follow this ;) described Microsoft instructions here in this document:
    http://support.Microsoft.com/kb/314060

    Please post again if you have managed or not

  • After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is

    After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is

    What's with Firefox?

    Start Firefox in Safe Mode {web link} by pressing on the
    (Mac = Options)
    key and then from Firefox. A small dialog box should appear. Click start in Safe Mode (no refresh).

    Is always the problem?

    Start your computer in safe mode with network. Then launch Firefox. Try safe sites. Is always the problem?

    Start the computer in Mode safe;
    Free online encyclopedia

  • Satellite A200-1AI: big screen when using a digital projector with display 4 x 3

    I have a Toshiba A200 - 1AI with Nvidia Geforce Go 7300 graphics, the laptop has a 1280 x 800 display. When a digital projector from here/more 1024 x 768 is plugged and the option value to display on display devices, changes in laptop to 1024 x 768 and will stretch to fit the screen, the projector is perfect.

    I prefer the laptop to show no deformed with a black bar on each side of the screen. There is an option in the Bios, which suggests that it is possible and indeed when the value of the bios displays this way without distortion, hoever when Vista starts up, it is up to the extended format.

    Is there a way to get around this.
    See you soon
    Nigel

    Hello

    Did you record the settings in the BIOS after changing this display option?
    Please don t forget to do!

    But if you have saved the settings and the display stills change resolution of 1024 x 768 stretched, then you should check the graphics features of nVidia in the control panel of the Vista operating system.

    Go to the NVIDIA Control Panel and check the Advanced view.

    Good luck

  • Satellite P305D-S8828 keyboard missing my typing and FN + F9 does not work

    Hello everyone.

    I'm new on this forum. Im sorry for my bad English right now. I hope I can explain my problems.
    I just bought a laptop computer to the United States with a great price. It's a great laptop, but there are 2 problems and they have big problems of r for me.
    It's Toshiba Satalite P305D-S8828 which is not available in europe, only sell in the United States.
    This is the link:
    http://explore.Toshiba.com/laptops/satellite/p300/P305D-S8828

    Laptop keyboard seems kind and gentle and good typing, but especially on a msn messenger box or forum page response, when I type, he's missing part of my typings? I mean, I used to use my quick keyboard, but it's like he's not pressing all the buttons, but I really rely on the letters. So the things I write are mixed, not understandable cos of lack of the letters.

    This isn't my first laptop. I used a bit more before, but nothing like this has happened before.
    It doesn't always happen, but generally occurs.
    I don't know what to do and this really do my head.
    I use Vista Ultimate Turkish. Don't you think that it is an OS problem? Or maybe the bios? More later (v1.90) I heard the same problem happened to some Fujitsu Siemens laptops, but it has been resolved with a bios upgrade. I hope you understand my problem and someone help me.

    My second problem is that my FN + F9 (function key) does not work. But some of them work, like FN + F1, FN + F2, FN + F3... work but FN + F9 does NOT work? :(
    I want to disable the touchpad when I plug my usb mouse, but I can't do it using FN + F9. My touchpad driver is installed and my OS is Vista Ultimate. Could you help me for that too?

    I hope that answering my questions.
    Thank you now
    all the loves of Turkey
    EMRAH

    Go to the Toshiba site us and download the latest version of the BIOS. Having the latest version of the BIOS is important on the new models.

    For the issue of the Touchpad, download and install the latest package of added value for the P305D and reinstall the driver from the Touchpad.
    If you have installed the drivers for your mouse USB (for example drivers Logitech or Microsoft), remove them. They may be in conflict with the Touchpad

  • Satellite A200-1AI - start system problem

    I have a problem starting with a model A200-1AI. When I press the power button on the laptop the power light turns blue and the hard drive light flashes blue for a second and then disappears. And now the CDROM drive light steady green. Nothing appears on the screen at all and there is virtually no noise coming from the laptop.

    I tried the following, but the same problem persists

    -Remove battery for at least 5 minutes and then re-inserted
    -Battery removal completed and started directly via the mains
    -HDD reconnected
    -RAM reconnected, in all possible combinations (one RAM module with the other out has left and exchanged by the two bays of RAM)
    -Reconnected all major components connected to the motherboard, basically, I have removed the keyboard and reconnected everything I could find just to make sure that all connections are in place
    -Connect an external monitor
    -Open the CD drive manually to make sure nothing is stuck

    As the hard drive light flashes it seems to indicate a failure of the HARD drive but I expect at least the machine to enter the BIOS and can report a HARD drive failure? It seems to indicate a failure of a component somewhere but I would like to see if anyone else out there, maybe he knows a mother board failure?

    Any help or pointers would be appreciated :)

    Hey Buddy,

    Unfortunately, I think that Akuma is right and I think you've tried everything you can do, this issue seems to be a hardware malfunction and you will need to contact an official authorized service provider:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

    Here it s only a user forum user where you can talk with normal people like you and me, so nobody is able to give you detailed repair instructions.

    So you in contact with the technicians of the laptop. I'm sure they can help you and it s interesting to talk with them. :)

  • Satellite A200-1AI (PSAECE) error using Toshiba Disc Creator

    I have an A200-1AI (PSAECE) running Windows 7 Ultimate 64 - Bit with 3 GB of RAM and a TEAC DV-W28ECT Combi drive...

    Whenever I try to create a CD/DVD or anytype of media using Disc Creator, I get the error messages 6 or more: -.

    An unexpected error has occurred.
    32007C-26-00000001

    This error message appears 6 times, when I run the software and select Audio or data.
    Then the window file transfer normal 6 tracking software-related the same error messages and the software is unable to burn anything... When the software is closed, it does so with 6 error messages more before closing...

    The laptop is installed with Vista 32 bit and I formatted the computer before installing Windows 7 64 bit as a clean install...
    There were no problems at any time during this process, the laptop infact has been better than ever... so far :)

    I already had 10 Roxio installed in my burning software, but I couldn't get along with it if he took off for Toshiba Disc Creator (as it's FREE!)
    Media Player and Windows itself also consumes CD ok...

    I can provide more information if necessary.

    Hi mate

    May I ask where you got the creator of Toshiba drive for Win 7 64 bit operating system?
    I checked the European driver of Toshiba page and there is nothing in the box Satellite A200.

    In my view, the error message is displayed because you use software that is not compatible with Windows 7 installed.

Maybe you are looking for

  • Tecra 8000 - failure to CD-ROM - new installation disc?

    The CD-ROM drive in my Tecra 8000 has a defect. It attempts to load a CD-ROM, LED is flashing, it stops, and then the drive LED is lit.So I guess the drive is down. What kind of new CD-ROM is suitable for this laptop? Toshiba only original ones?

  • How to find the thermocouple type progromatically

    Hi all Is there a way to progromatically get the thermocouple set channels type? I ask because I want to write the type of thermocouple in my diary of PDM.  I suppose that if possible it is a function of property node, but I can't. Thanks for any adv

  • How can I import pictures to my computer using a sd card?

    I managed to get a few photos in the SD in front, but no more. How can I add new photos to the sd card in the computer? For some reason any AutoPlay does not, eject even if it is set to ask me every time. Not very in computing I use Vista

  • Connection directory LaserJet M1212nf MFP error

    I used to be able to fax directly from my computer via the directory what Scriptures I entered manually on the printer itself and also some as I walked through the fax option on my computer.  Then all of a sudden I couldn't not to fax fax directory o

  • Keyboard shortcuts do not work?

    Hello I recently reinstalled Vista OS on my Dell Inspiron 1526 laptop. In my opinion, missing a driver for this purpose the hotkeys (Ctrl + Alt + Delete) does not also Ctrl + V and others as. I searched the Dells site but can't seem to find the drive