Satellite A200-1AX: how to connect to the TV HDMI port

Hello

I'm owner A200-1AX (PSAE6E) computer laptop with ATI Mobility Radeon HD 2600. The video card is supported hardware high-definition audio and video, but it has connector HDMI No.. I want to know, if there is any way to connect to the laptop to the HDMI in on the TV?

Thank you!

No way dude you can't connect the laptop to HD TV if the laptop doesn't supports HDMI port.

Some series of laptops Toshiba as P200, X 200, G40, etc. are supported the port HDMI but not an A200

Good bye

Tags: Toshiba

Similar Questions

  • Re: Satellite A200-1AX does not start after the BIOS update

    Hi all!

    I wanted to install XP on a Satellite A200-1AX.
    So I tried to update the Bios to the version that supports supported XP.

    When I tried to install it, crashed Vista and now the laptop won't even turn on.

    When I keep the power button pressed, the whistling fan but nothing happens.
    I think the BIOS is gone or corrupted.

    What should I do?
    Thanks in advance for any help!

    > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

    What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

    In this case, you can do anything you will need to contact the ASP in your country for a fix!

    Don t waste time and ask a technician for assistance.

    Good luck and best regards

  • Satellite A200-1RK: how to connect to internet

    Hello

    I just bought my daughter an A200-1RK for Christmas.
    I would like to have the internet up and running when she opens it up, but I'm worried about the best way to do it.

    I have 2 mb broadband via a NTL cable modem.
    Could connect a usb cable from the modem to the laptop or that I would be able to connect the modem to the laptop using an ethernet cable?

    Or the other of these works would be or could they damage my laptop girls?
    I'm afraid to try incase I damage it is why I asked here first.

    I know it's maybe a stupid question, but I'm new to all this.

    As a final would be better just to get a router cable? Thank you, Andy.

    It really sounds like you are a computer newbie!

    You won't damage anything if you do use force to connect the laptop to the cable modem. ;)

    The modem (DSL modem) must be connected to the portable LAN port and no USB port.
    Usually, the gateway must be configured first to get access to the internet.
    Then simply connect the Lan of the laptop and the network adapter must assign TCP/IP automatically.

    If you have any other questions, do not hesitate to ask

  • Satellite A200-1UV - how do I print the screen?

    Hello-

    I have Toshiba Satellite A200-1UV - can someone tell me how to view the screen, I'm looking.

    For example how to print 20-30 small jpg.pictures screen I see when I open a folder with photos of som I in the folder?

    Can I copy a put in a document, and then print or I can choose all the images and print them on plain paper?

    Thanks by

    Hello

    You can print the screen using the keys CTRL + print
    Now you must open a graphics editor like paint or something like that.
    In paint, click new file/photo and then use the CTRL + V keys to past the print screen.

    Welcome them

  • Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

    Hello

    I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

    Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

    My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

    Thanks for your help!

    p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

    I don't know where are these properties.

    Hello

    It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
    It could be that the button is not named as mine, but it must be identical.
    After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

    I think that you will make it, but I'd like some feedback from you.

    Welcome them

  • Satellite Pro M70: How to connect to the internet using a second computer

    I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

    My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

    He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

    I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

    If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

    The virus could have damaged the Ethernet controller, or she affected somehow?

    Is it possible to test?

    Have you advice?

    Hello

    The virus was detected on the laptop you so maybe your PC has also been affected.
    Did you check if the laptop and the PC using the same workgroup?

    XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

    Maybe it helps

  • Satellite L450-181 - how to connect to the TV?

    How to connect my laptop to my Toshiba regza TV?

    Hi ian guest,.

    Unfortunately, your laptop doesn t have output HDMI then you must use the VGA port on your computer. Most TVs also have that VGA port, so you can use a VGA cable to the connector on your laptop to the TV.

    If you did start two devices and select VGA (PC) channel on your TV. Press the FN + F5 key combination to switch between monitors (internal and external).

  • How to connect my laptop via HDMI port to my TV + VGA of Propjector port

    Product number: C6K18EA #ABU, Windows8,.

    I need to connect laptop new mu via its HDMI port to a VGA port on my TV and a projector (at different times),

    I have a cable that connects the VGA port and HDMI port, but the computer does not see the TV or projector.

    Kind regards

    Stewart

    I understand now.

    I'm sorry.

    You must purchase a digital receiver.

    HDMI to VGA.

    This link show how to knit.

    http://www.YouTube.com/watch?v=PCFYSB0g-I8

    A picture of this cable.

    http://cdn100.iofferphoto.com/img3/item/509/259/340/HDMI-male-to-VGA-female-adapter-cable-HDMI-cable-2980.jpg?visavale

    att Cristian.

    If this answer help you click in congratulations to the tanks.

    If you have further questions click Accept as a Solution to close this case.

    Tank you.

  • Satellite L300-1BV - how to connect to the TV?

    Hello
    Should what cable I plug the Satellite L300-1BV to my TV?

    Thanks for the answers in advance

    Hello

    What video ports you have on your Satellite L300 of output?

    I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

  • Satellite L350-264 - how to connect to the TV?

    I have a L350-264, which does not have an HDMI output jack. I want to play videos through my TV Sony flat screen.

    I think I can connect the Jack of the monitor (15-pin) for vision TV, but what about the sound. I guess that the headset plug will not provide a strong enough signal.

    Any suggestions?

    Hello

    > I guess that the headset plug will not provide a strong enough signal.
    Why do you think that?
    You have tested it already?

    On my Satellite L300, I too only VGA output port and use the headphone jack to the audio signal. Everything works fine and the sound is pretty good.
    Check it!

  • Satellite A200 - 196 how can I restore the Partition from Toshiba hard drive?

    I need to restore my hard drive to factory default.

    I tried now pressed the 'Zéro' key at startup, also tried one at a time, hold down F2 and F8, F10, F12, but none of them put me in the Recovery Wizard.

    I searched the help files on the PC and online but nothing helped.
    Someone at - it an idea how I can get into the recovery partition it please?

    Hello

    You should be able to start the installation of HARD drive recovery as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    Please note: this will not work if your laptop works with the factory settings. If you have used clean OS installation HDD recovery no longer unavailable. For the installation of factory settings, you must use disk recovery DVDs.

    Everything must be described in the document s user manuals.

  • Satellite P200-1EE - how to connect to the device using Belkin Mini Bluetooth Adapter

    Please can someone help with my problem.

    I am running Vista sp2 and just bought one of these adapters.
    Tried to load the software and I'm having problems.

    This icon appears in the system tray, but no icon on the desktop.

    Now I have 3 other computers running XP and have installed the software without problem.

    Belkin has called this afternoon and they recommended their virtual software but this has not solved the problem.
    Tried the Broadcom website and download their latest software but still no joy.

    Without the software, I can't pair devices to the computer, but I can print for my C5380.

    Someone had a similar problem?
    What is annoying is that they use a Toshiba laptop like the screenshot in the installation guide.

    Help!

    OK, I worked in a solution.

    The software cd has a file for windows like vista

    The windows folder installs an earlier version of the software, but it works with vista.

    The vista software does not.

  • Satellite A200-1ax: could not get the BT working on Win XP

    Hello

    I have a Toshiba laptop satellite a200-1ax. I installed Windows XP sp2.
    My problem is that I can't get the bluetooth work. I have installed a Toshiba bluetooth driver and nothing. When I try to install the bluetooth stack Toshiba the instalation stops at the driver part and won't. I tried, and left for more than 2 hours and it was not moving.

    When I opened my device manager there is no place where a bluetooth connection is mentioned. In the bluetooth of the 5 information system services where collapsed and to manual start. I tried to start manually services.msc, but there was no available bluetooth service.

    You have to add that I have 3 elements in with question marks Device Manager:
    1. mass storage controller
    2. feature modem on high definition audio bus
    3 PCI memory controller.

    If anyone can help with the problem of bluetooth, or three missing drivers, please do :)

    Hello

    The Bluetooth should work!
    The laptop supports the BT module, and I think that you have not properly installed.

    Firstly don mix t the monitor BT with BT stack. You need the BT stack!
    I think that you should remove the software BT OS and after that new reboot should try to reinstall again.

    Then you must enable BT using the Fn + F8 key to complete the configuration of BT!

    Other devices such as PCI memory controller and mass storage controller. Are not supported by Windows XP and therefore there is no drivers!

  • Satellite A200-1AX - overheating of the graphics card in Windows 7 64 bit

    Hello.

    Model of my laptop Satellite A200-1AX possessing a Mobiliti Radeon 2600 video card.

    After installing Windows 7 64 bit can't find the correct work display driver.
    Fan does not work quickly, by the suite and heavy applications is overheating and the laptop is turned off.
    Not able to find a driver for Windows7 64 bit or Vista 64-bit for my card on the Toshiba site.

    The site of AMD.com a driver for Radeon 2XXX series:
    Windows 7-64 bit ATI Catalyst a? ¢ Display Driver Version: 9.9, Edition Release
    Date: 09/09/2009. -Drivers do not help.

    I tried to increase the fan speed you programs 'ATI Tray Tools', has not helped.

    Please help me with my problem. Sorry for my English

    Hello

    The drivers of Toshiba laptops are a bit different and not the same thing as the drivers from the manufacturer of the graphics card.
    The original ATI drivers are made for office use and not for mobile use. Drivers Toshiba takes supported thermal protection that allows to control the performance of gpu and the dissipation of the heat.
    If you want to use a page ATI driver then your GPU could create more heat as usual which leads to the unexpected shutdown.

    I installed Win 7 on my A210. I didn't install the driver of ATI graphics card because the Win 7 automatically recognizes the graphics chip.
    After installation, I went to the Device Manager. Then, I chose the graphics chip and looked for the driver automatically. Windows has found the right driver and installed this
    Since the unit works perfectly with Win 7

  • Satellite A200-1AX - recovery in German instead of the language CD English

    I reinstalled the recovery of the proceeds of my satellite a200-1ax disk and operating system running now in German language. and it's only now that I noticed that the drive that comes in the package is in German but I chose the English language at the beginning of the recovery of product.

    What to do now?

    Jose now very annoying.

    Hello

    Where did you buy this laptop? In Germany?
    The recovery CD is delivered in the same language, where you bought the laptop.

Maybe you are looking for