Satellite A200-1BJ: need SATA driver to change the Win XP operating system

Hello

I have the Satellite A200-1bj with Vista.
I want to change to XP pro but the famous message
"There is no hard disk" are indicated.

So, I need driver for phones!
helllllllllllp

Hello

The Satellite A200 - 1BJ PSAE6E needs an Intel Matrix Storage Management utility.
This iMSM must be installed in the first place.

It seems that this topic has been discussed a lot of time here in the forum.
I found very interesting thread;
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749&MessageID=94438

Check these two threads and if necessary you can use the advanced search options in this forum and looking for Intel Matrix Storage Manager

Concerning

Tags: Toshiba

Similar Questions

  • My hard drive crashed and the only disk operating system that I can find is my Windows 7 upgrade disk. Can I do a full install on a blank disc of this?

    My title pretty much sums up my problem.

    I need to buy a new hard drive.  All I have is the Windows 7 upgrade disk I bought for some time.  I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?

    If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

    How to do a clean install with upgrade disc:

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the disc/s click on Delete

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Satellite A200 - I need to driver for Texas Instruments flasmedia

    Hello, I have install Vista Home Premium 64 - bit in my laptop and I need a Texas Instruments PCIxx12 Integrated FlashMedia Controller.
    I put t know where I can find it.

    Can someone help tell me where can I find this driver?
    Thank you

    OLA JOSE

    Please first consult your A200 model number because there are different models of Toshiba A200.

    But that Joey has already said the card reader controller driver is available on the European driver Toshiba page and after the installation of your card reader internal should run using Vista 64 bit.

    Mucha suerte ;)

  • Satellite A200 - 1 m 7: how to change the size of the partition C and D

    Look at toshiba a200 - 1 m 7... Windows Vista system. HARD drive it is divided on (c) - 75 GB and (d) - 75 GB, but for (c) - 75 GB there is a lot of... A question: how to divide - (c) - 30 GB, and 120 GB (d) - so here?

    Thank you...

    Hello

    As far as I know, you can reduce and create the single partition in Vista disk management.

    Disk management should be found in administrative tools.
    Here, you can try to reduce first the C partition and then try to add free space to the second partition or you can create a new one.

    Good luck.

  • Satellite A200 - 26 d: installed XP & cannot change the brightness of the screen or scroll

    After having removed Vista and installed XP Pro I find now that I can't adjust the screen brightness (F6 & F7) - HELP Please!

    (also scroll touchpad doesn't work anymore?)

    Maybe you need to update the BIOS to version XP one then you should reinstall all the drivers available Toshiba and tools again.

  • backup of the old system changed the type of operating system installation

    After backup all data to your desktop at home and move the backup file on the replacement computer that was running and had been activated, got backup and ran into problems.  The original pc was an OEM system with a valid OEM key and had been activated for years.  The new system is a renewed system which has an apparently valid cd and COA 'For refurbished computers' active fine and had been restarted several times after activation before the fiasco of the backup.

    After that I ran the backup recovery, system was restarted as planned, but when the time came to connect to windows, we encountered a problem of activation.  He said that the system should be activated.  I went ahead and put in the key that is attached to the system (the key for PC) refurbished, but he would go through.  I checked that I read the key from the sticker correctly several times and by two other people.  He would not suffer.  Just on a chance that the backup of the old system caused a little problem, I tried the OEM key that was on the original system.  He's been through.

    If the old system should simply be scrapped, I don't think anything, but it will be either made to disadvantaged youth, so I want to make sure that everything is always good about it and it is all above board.  In its current form of the key is now on two different systems.  What can I do to fix this?

    Hello

    I suggest you to download the tool to update product key on your system and then update the product key and check. Follow the steps mentioned in the article below.

    Update your Windows product key

    http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key?displaylang=en

    If this does not help, then I suggest you to activate by phone and check.

    How to activate Windows XP

    http://support.Microsoft.com/kb/307890

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite A200-1BJ: Windows Server 2003 need display driver

    Dear Sir.

    A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
    The system configuration is provided by the company.
    Operating system: Windows Vista editions Home Premium
    300 hard drive space is divided into two partitions:
    C - Vista with Go 138
    D data disk seen 139 GK

    I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

    My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

    Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

    Thanks in advance.
    Kind regards.
    N. Rama Krishna Pai

    Hello

    Are you looking for the drivers for Windows Server 2003?
    Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

    Win Server 2003 operating system was designed based on windows XP.
    So usually the drivers Win XP should work!

    Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

    Maybe a site www.omegadrivers.net might help you.

    But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
    Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

  • Satellite A200-1BP: need to display driver for Vista

    Hi guys!

    I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...

    So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail

    Thanks for your answers rigth now...

    Hello

    Additional numbers describes the series of laptop! There are different A200 series!
    At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.

    Please choose the right Satellite A200 series and download the graphics driver on the right!

    But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.

    In such cases, it s advisable to run and play games on Win XP operating system!

  • Need drivers for Satellite A200-1BJ

    Nice day

    I have computer laptop satellite a200-1bj

    I want to download its drivers but without success... He is not here in the page drivers

    Help out me

    Of course, it is here.
    Your laptop is PSAE6E part number.
    Go to Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp and choose the archive option.

    Follow these steps:
    Product type > Archive
    Family > Satellite
    Product series > satellite A series
    Model > Satellite A200 (PSAE6)
    Model short-term > PSAE6E
    and so on.

  • A few questions on the Satellite A200-1BJ

    Dear Sir.

    A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
    The system configuration is provided by the company.
    Operating system: Windows Vista editions Home Premium
    300 hard drive space is divided into two partitions:
    C - Vista with Go 138
    D data disk seen 139 GK

    When buying the laptop, I had only the recovery CD and there is no Drivers CD. Three years agao, at the time of buying laptop toshiba, I got the drivers CD as well with the recovery CD. Why the driver CD does not come in the current edition of the laptop.
    I need to install a software application which requires about 200 GB of space. In this regard, I have the following questions for which I want explanation from you to guide me to take the appropriate action.

    (a) I want to create a new 50 GB partition using the free space on the C drive. How can I do this? If possible, so I can install my application software by merging 50 GB with the D drive space.

    (b) can I change the configuration of HARD disk space by installing the new copy of windows vista operating system. During the installation of the operating system, it will ask for the disk partition in this case, I'll format the C drive current and have a new partition of C (78 GB) and D (190 GB). Is this possible.

    (c) If b is possible, so how do I install all drivers in the system currently installed with, since Toshiba Co. don't did not provide me with the driver CD. How

    Can I get the drivers CD. Do I have to load all the drivers of webside and create a DVD of the same thing?
    Waiting for your response, which will allow me to take the appropriate decision.
    Thanks in advance.
    Kind regards.
    N. Rama Krishna Pai

    > Three years ago, at the time of buying laptop Toshiba, I got the drivers CD as well with the recovery CD. Why the driver CD does not come in the current edition of the laptop.

    I put t know exactly why Toshiba has decided to only provide the recovery CD and not the driver CD with the laptop, but all the drivers that are preinstalled on the laptop are on the Toshiba driver page. Given that all computer users have access to the internet, it should t be a problem with the driver download!
    Also the restore CD contains the entire image of Toshiba with all the pre-installed driver, tools and utilities.

    > I want to create a new 50 GB partition using the free space on the C drive. How can I do this?
    You can do it in Vista disk management.
    You can reduce the C partition and on free space, you can activate a partition of second or third.

    > Can I change the configuration of HARD disk space by installing the new copy of the windows vista operating system?
    To my knowledge, this is not possible using the Toshiba Vista recovery CD.
    But check the proposal above!

    > If b is possible, so how do I install all drivers in the system currently installed with, as Toshiba not did not provide me with the driver CD.
    B is not possible, but as already mentioned, the drivers are on the Toshiba page

    > Can I get the drivers CD. Do I have to load all the drivers from the website and create a DVD of the same thing?
    This CD can be obtained, because it does not exist. Download driver page.

  • Satellite A200-1BJ - no display on external monitor

    Hello

    I have a display problem with my laptop, which is:

    When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
    I used F5, Catalyst Control Center, but without success.
    When I connect it with a TV using s-video, I get the message "no signal".
    I think of the existence of the other devices, but the content is not sent to the external display.

    I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
    The problem is that he used to work, then suddenly it stopped display on external displays.
    I could not understand the problem, then I thought that the settings have been changed accidentally.
    So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

    My computer specs:
    -Toshiba Satellite A200-1BJ
    -Processor: Intel Core2 Duo
    -OS: Windows Vista editions Home Premium
    -Graphics card: ATI Mobility Radeon HD 2600

    Does anyone know the solution?

    Thanks in advance.

    In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Have you tried different cables? Maybe it s faulty or too long.

    Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

  • On the Satellite A200-1BJ wireless LAN

    Hello

    I need your kind help in this issue, think I'm dealing with my laptop. The driver disappeared and I can't. I tried to download from toshiba support, but it did not work also.

    OS: Vista home
    Model: Satellite A200-1BJ

    Also, whenever I try to use my modem it does not work and I get the message 'no dial tone' although the phone line works.

    pls advise me on these issues

    THX
    Khalid

    Hello

    what driver you downloaded? For Intel or Atheros? It would be really interesting because if you have installed the wrong driver, it s possible that it doesn´t work. So if you try the two pilots, one of them SHOULD work.

    With regard to your Modem:

    Go to control panel and then open the phone and Modem Options, and then choose the "Modems" tab, choose the modem you´re to help. Then, a window should appear where you must choose the tab "Modem". There is a "Control dial" setting where you must uncheck the box "in waiting for the dial tone before dialing."

    After that, the modem should work.

    Welcome them

  • Satellite A200-1BJ tends to overheat and cutting everything in game

    Hello

    I have a problem with my laptop. He has a tendency to overheat and shut down when I play games. CPU was just before 107C the emergency stop.

    Fan works, but fan speed gets ever faster from 70 ° C to stop. (I know it can go faster, because when I flashed the Bios, he spends at maximum speed.)

    So my question is: is there a way I can force fan to move at full speed?

    Satellite A200-1BJ, Mobility radeon HD2600, Vista ultimate 64 bit graphics card, 4 GB of ram, bios 2.20

    Post edited by: Jason (added bios information)

    Hi Jason

    > I have problem with my laptop. He has a tendency to overheat and shut down when I play games. CPU was just before 107C the emergency stop.
    I agree with you. It really looks like an overheating problem.
    If the internal temperature reaches a critical level then the laptop stops automatically to prevent the equipment from damage.

    Why a laptop overheat?
    Well, there are various reasons such warm-ups.
    First of all it is possible that don t cooling modules work correctly because of the dust and debris inside the laptop.

    You must also make sure that there is enough free space around the laptop to ensure fresh air circulation.

    At the other hand as a graphic driver non-Toshiba could cause an overheating problem.
    This is why you should always use a graphics driver for the Toshiba driver page.

    Please check the points mentioned and maybe you might know the reason for the overheating problem.

    See you soon

  • Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver

    Hello.

    I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

    I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
    The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

    The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

    Now, I can't play games or watch movies.
    Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

    I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

    If I try to put it above it is always black.
    Can someone help me?

    Thank you very much

    Hello

    First of all, you should visit this Australian page from Toshiba:
    http://www.ISD.Toshiba.com.au
    You will find all the drivers for this model of laptop.

    I checked and found that there is a BIOS v2.5.
    Check if the BIOS needs to be updated (if the older BIOS is installed)

    In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
    Install it!

    Last but not least the Win XP should be updated to the latest state!

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

Maybe you are looking for

  • Hinges of satellite 2800 500

    OK, here's an obscure. I've owned my Satellite 2800 500 for about 4 years and I am very happy with it. Recently however, the hinges of the screen becomes very stiff to the point where they have now cracked their mounts aluminum just below the screen

  • HP7 shelf that I need help.

    My Tablet HP7 is frozen whenever I turn it on the HP splash screen. How can I solve this problem? I can't go to the droid reset like it is stuck on the entry screen and does not help shut off again. What should I do?

  • Notice of start: AppleSyncNotifier.exe

    I hope someone can help. Currently, at startup, I get the following message which reads: Apple SyncNotifier.exe Entry Point not found The enty point sqlite3_prepare_v2 procedure is not found in the library of dynamic links SQLite3.dll Any suggestions

  • HP Photosmart 6520, I'm trying to print Avery 5160 labels.

    HP Photosmart 6520, I'm trying to print Avery 5160 labels.  The spacing is off from the margin of 1 inch on the top which should be 1/2 in.

  • Network three, not to see!

    I created a network called OFFICE with three laptops, two bb wireless and a bb thread, but each computer can not see the other and when trying to open other I tells me that I don't have permission, etc. Any help would be appreciated.  WittsEnd