Satellite A200-1BJ tends to overheat and cutting everything in game

Similar Questions

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite A200-1BJ: Windows Server 2003 need display driver

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

  My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

  Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  Hello

  Are you looking for the drivers for Windows Server 2003?
  Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

  Win Server 2003 operating system was designed based on windows XP.
  So usually the drivers Win XP should work!

  Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

  Maybe a site www.omegadrivers.net might help you.

  But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
  Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

• Need drivers for Satellite A200-1BJ

  Nice day

  I have computer laptop satellite a200-1bj

  I want to download its drivers but without success... He is not here in the page drivers

  Help out me

  Of course, it is here.
  Your laptop is PSAE6E part number.
  Go to Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp and choose the archive option.

  Follow these steps:
  Product type > Archive
  Family > Satellite
  Product series > satellite A series
  Model > Satellite A200 (PSAE6)
  Model short-term > PSAE6E
  and so on.

• Re: Satellite A100-409 tends to overheat

  Hello everyone,

  My Satellite A100-409 tends to overheat after a few minutes of use, just to watch my mail or browse the internet, use simple and normal.
  The mouse pad has a tendency to overheat as well. I try to keep my dust-free specifications, but it's not helping and my left leg Burns!
  Someone at - it ideas on what can be and how to fix this? The use of a Kneeler is not an option!

  Thank you very much in advance for your suggestions
  Fabio

  Hello

  Your laptop computer shut down automatically?
  If you didn t notice any unexpected shut downs, then the computer laptop doesn't overheat!

  > The mousepad has a tendency to overheat so
  My touchpad is too hot. This is not unusual due to the internal temperature for laptop!
  The laptop as CPU and GPU parts produce a lot of heat and, therefore, the other parts may be hot too.

  > I try to keep my dust-free specifications, but it's not helping and my left leg Burns
  I see you don t use the laptop on the table. This is the main reason why the laptop can not be properly cooled and raises the temperature of laptops!

  Look, the vents are placed at the bottom of the unit and they must be free! It is very important to ensure a flow of ACI cooling properly and very fresh!
  In addition it should be always enough free space around the laptop even if the laptop was sitting on the desk.

  So, don t use in bed, sofa, sofa etc is undesirable and very risky because notebooks cooling module does not work as it should.

  Concerning

• A few questions on the Satellite A200-1BJ

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  When buying the laptop, I had only the recovery CD and there is no Drivers CD. Three years agao, at the time of buying laptop toshiba, I got the drivers CD as well with the recovery CD. Why the driver CD does not come in the current edition of the laptop.
  I need to install a software application which requires about 200 GB of space. In this regard, I have the following questions for which I want explanation from you to guide me to take the appropriate action.

  (a) I want to create a new 50 GB partition using the free space on the C drive. How can I do this? If possible, so I can install my application software by merging 50 GB with the D drive space.

  (b) can I change the configuration of HARD disk space by installing the new copy of windows vista operating system. During the installation of the operating system, it will ask for the disk partition in this case, I'll format the C drive current and have a new partition of C (78 GB) and D (190 GB). Is this possible.

  (c) If b is possible, so how do I install all drivers in the system currently installed with, since Toshiba Co. don't did not provide me with the driver CD. How

  Can I get the drivers CD. Do I have to load all the drivers of webside and create a DVD of the same thing?
  Waiting for your response, which will allow me to take the appropriate decision.
  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  > Three years ago, at the time of buying laptop Toshiba, I got the drivers CD as well with the recovery CD. Why the driver CD does not come in the current edition of the laptop.

  I put t know exactly why Toshiba has decided to only provide the recovery CD and not the driver CD with the laptop, but all the drivers that are preinstalled on the laptop are on the Toshiba driver page. Given that all computer users have access to the internet, it should t be a problem with the driver download!
  Also the restore CD contains the entire image of Toshiba with all the pre-installed driver, tools and utilities.

  > I want to create a new 50 GB partition using the free space on the C drive. How can I do this?
  You can do it in Vista disk management.
  You can reduce the C partition and on free space, you can activate a partition of second or third.

  > Can I change the configuration of HARD disk space by installing the new copy of the windows vista operating system?
  To my knowledge, this is not possible using the Toshiba Vista recovery CD.
  But check the proposal above!

  > If b is possible, so how do I install all drivers in the system currently installed with, as Toshiba not did not provide me with the driver CD.
  B is not possible, but as already mentioned, the drivers are on the Toshiba page

  > Can I get the drivers CD. Do I have to load all the drivers from the website and create a DVD of the same thing?
  This CD can be obtained, because it does not exist. Download driver page.

• Satellite A200-1BJ: need SATA driver to change the Win XP operating system

  Hello

  I have the Satellite A200-1bj with Vista.
  I want to change to XP pro but the famous message
  "There is no hard disk" are indicated.

  So, I need driver for phones!
  helllllllllllp

  Hello

  The Satellite A200 - 1BJ PSAE6E needs an Intel Matrix Storage Management utility.
  This iMSM must be installed in the first place.

  It seems that this topic has been discussed a lot of time here in the forum.
  I found very interesting thread;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749&MessageID=94438

  Check these two threads and if necessary you can use the advanced search options in this forum and looking for Intel Matrix Storage Manager

  Concerning

• On the Satellite A200-1BJ wireless LAN

  Hello

  I need your kind help in this issue, think I'm dealing with my laptop. The driver disappeared and I can't. I tried to download from toshiba support, but it did not work also.

  OS: Vista home
  Model: Satellite A200-1BJ

  Also, whenever I try to use my modem it does not work and I get the message 'no dial tone' although the phone line works.

  pls advise me on these issues

  THX
  Khalid

  Hello

  what driver you downloaded? For Intel or Atheros? It would be really interesting because if you have installed the wrong driver, it s possible that it doesn´t work. So if you try the two pilots, one of them SHOULD work.

  With regard to your Modem:

  Go to control panel and then open the phone and Modem Options, and then choose the "Modems" tab, choose the modem you´re to help. Then, a window should appear where you must choose the tab "Modem". There is a "Control dial" setting where you must uncheck the box "in waiting for the dial tone before dialing."

  After that, the modem should work.

  Welcome them

• Satellite A200-1BJ - no display on external monitor

  Hello

  I have a display problem with my laptop, which is:

  When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
  I used F5, Catalyst Control Center, but without success.
  When I connect it with a TV using s-video, I get the message "no signal".
  I think of the existence of the other devices, but the content is not sent to the external display.

  I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
  The problem is that he used to work, then suddenly it stopped display on external displays.
  I could not understand the problem, then I thought that the settings have been changed accidentally.
  So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

  My computer specs:
  -Toshiba Satellite A200-1BJ
  -Processor: Intel Core2 Duo
  -OS: Windows Vista editions Home Premium
  -Graphics card: ATI Mobility Radeon HD 2600

  Does anyone know the solution?

  Thanks in advance.

  In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried different cables? Maybe it s faulty or too long.

  Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

• Satellite A200 - 14 d - i.LINK and FireWire - it's the same thing?

  Hi, guys :)

  Well, I'm about accurately - and a new external hard drive My Book by W * digital Stern (the Studio Edition with 1 TB of storage).
  So I have a Toshiba Satellite A200 - 14 d. I read in the manual to my laptop it has port i.LINK (IEEE 1394-a).

  Ext.hard My Book drive has FireWire 400/800. I read on the internet that FireWire and i.LINK are the same for the IEEE 1394 standard.
  They're just different names. i.LINK is by S * ny and FireWire is by Ap * the Inc. Because I'm not sure I would ask here: if I connect an external device (in my case - ext.hard drive) which is supposed to be with the ability to connect via FireWire 400/800 to my laptop i.LINK port, there will be a kind of incompatibility?

  Thanks in advance!

  Hello

  Yes, i.Link, firewire or IEEE 1394 has the same meaning. ;)

  See this Wikipedia article on firewire:
  http://en.Wikipedia.org/wiki/FireWire

  Welcome them

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Satellite A200 - 1 H 2 - Virus and its driver problem

  Three weeks I bought new laptop Satellite A200 - 1 H 2.

  I have Windows vista with my new laptop computer.

  1. When do voice chat online (yahoo chat or just VOIP), receiver is not able to hear my voice but can't seem to listen to his voice clearly.
  My versions of sound cards are:
  Audio version of Realtek High definition: 6.0.1.5433
  High definition Audio Device, version: 6.0.6000.16386

  I checked the audio drivers, my speakers and the sound settings. everything is fine. Even if the problem still exist.

  2. I installed Norton Anti virus on my machine that came with the new laptop, even if a virus settles in my machine, his hitting messge automatically between my messages.
  But every time I run anti virus, get a message like a cookie should be resolved, even after setting this cookie also in the next virus scan am same cookie again.

  I deleted the cookie of IE-> tools-> options. But it has not solved the problem.

  You could any body help me on these problems?

  Hello

  Autour Googling, I found many comments on the problems of sound using Yahoo Vista. Have you checked what others write about it? Yahoo is not my favorite Messenger but I would like to know if you are using the version for Vista?

  Unfortunately, I can't say anything about Norton. I tested this version of 90 days on my P200, but after a few days I have removed from the system. It is not my favorite for the protection of the system program.

• Satellite A200-1UM - prohibitions of departure and not possible formatting

  Hi all

  At first, I want to apologize if my English is not so well and maybe a little hurt.

  I have a Toshiba Satellite A200-1UM Cristmas 2007 and until now I never had big problems with it, but now, I got a huge.
  Yesterday, when I came back from school, I started first, as always my computer to check my emails, etc..
  At first, all was normal the normal screen appeared: "Toshiba Leading innovations", after the screen with flashing underscore, but after that line... a progress bar appears with text on this subject: "Windows loading files.
  I thought: hm k allow it to load its files...

  Right after loading all seemed to be OK, the next screen came: (C) Microsoft Corp. with the green bar moving on it, normal as...
  But then after that, it became black... nothing more...
  I waited... and waited... and waited, but nothing happened...
  Then I restarted, maybe it would work now, but it happened again the same screen loading and so on... and she went back to black...
  Then I tried to start it in mode (I pressed F5 on the 2nd loading screen)
  I tried all the different options of Save mode, but it still stopeped to drivers\disk.sys... I had like crazy... I tried different options to F5: finally begin the normal version and so forth, but all collapsed at any time... and nothing happened that more...

  I had enough I put on my discovery of product and wanted to format it all... In the first screen, I press F12 and I went CD/DVD (product recovery disc), but this * progress bar appears again and the (C) Microsoft Corp Screen and it still got black * wuhuuuo-.-'*.

  Result-> nothing works at all the... I tried to get aid to some German forums, but they gave the advice that I better should try in this forum, because im actually cause down with my nervs, im on the school in the last year and I NEED my lap top for homework and everything...

  I hope you can help me...

  Better accommodate the of the Germany...

  Hello

  Your question is strange because the bar of progress Windows appears and it would mean that the operating system that is installed on the HARD disk can be booted from the HARD disk.
  And this means that the HARD drive is still in use.

  However, it could be a HARD disk failure.
  As resident suggested, you can check the HARD drive using the HARD drive fitness test.
  He will check the HARD drive, and will show you the status of the HARD drive.

  If everything is OK with your HARD drive, then it must be another malfunction.
  You said that you could not start using the Toshiba recovery disc.
  Maybe you should try another disk bootable as MS original Windows XP CD.

• Satellite A200-1BJ: webcam currently in use or not plugged in!

  Hello

  I have laptop Toshiba A200-1BJ and I had a problem with my camera.

  When I try he woke up, he gives me this massage currently in use or not plugged in.
  I delete the old driver provided with the laptop and download another driver from the Toshiba site for my laptop model and install it, but my camera didn't work.
  It gives a massage that I turned on my camera.

  Can you help me in this way?
  Thank you for the cooperation.

  Stand by. You try to use the cam with another application or just to use it with the software offered by Toshiba?

  Try it please remove Toshiba Software and test it with Skype or MSN.

• Satellite A200 - lack of icon DVD and DVD burner does not.

  Hello

  I have a problem with my laptop Satellite A200 series. DVD/RW icon disappeared from my folder on the computer. I looked into the system folder and it says:-

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I've been on the Microsoft Web site and who said to delete the driver and them click on check for changes on the hardware and it should find the new driver, but it still does not work...

  Any ideas?

  Hello

  Maybe this will help.

  [ME KLICK | http://aps2.toshiba-tro.de/kb0/TSB7801XL0000R01.htm]