Satellite A200-1CC does not start after upgrade to 4 GB RAM

Similar Questions

• Satellite A200 PSAEOE does not start after upgrading memory

  Hi, I am first time here.

  I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

  Can anyone help me, please.

  Post edited by: Marian ovidiu

  Hello

  The A200 series supports different chipsets;
  Intel 945 PM
  Intel 945GM
  Intel 943GML

  As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
  Take a look at your laptop s user manual * Page 18.*

  Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye

• Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

  Hi, I need help!

  computer laptop, tested just got everything ok with Vista business and everything works fine.
  Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

  Restarted the laptop with the bios disk selected bios XP and everything seems ok.
  The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
  Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

  Now does not start, so what do I do to get this thing working again?

  Hey Buddy...

  This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

  I hope that the ROM module must be flashed again.

  This can be done only by an authorized service provider.
  I see no other solution for contact ASP in your country and ask for help and handling.

  Good luck and best regards

• Satellite L100 113 does not start after upgrading memory

  Hello.

  Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(

  I read manual - this laptop supports 533 PC4200 memory modules.

  But SO-DIMM 533 MHz will be delivered in one month...

  The memory modules, we can install to Toshiba L100-113?

  Thank you.

  Hello

  I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.

  Please visit this memory 3rd party:

  [Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]

  As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Concerning

• Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB

  I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not.

  When I put in the 1 4 GB module and 1 2 GB module the system starts without a problem and has 6 GB. I checked the two 4 GB modules, they work in any combination, but not when both are installed together.

  I couldn't find any rider or the settings of the bios for the RAM...

  Any idea?

  Thanks in advance for the help

  The last plausible explanation is that both modules are ok, but not compatible with each other.
  The laptop can be upgraded up to 8 GB of RAM. This should not be a problem since the unit is supported by the Chipset Mobile Intel HM55 Express.

  So I think that you need to replace the modules Kingston modules are great and work without problem.

• Satellite 1410-304 does not start after upgrading memory

  I tried to extend the memory of 512 MB to 1 GB by placing two memory modules in my laptop Satellite 1410-304.
  These blocks of memory are each 512 MB and type: DDR400 PC3200 SODIMM.

  Each memory separate block in one of the memory slots A or B works well, no problems.

  However, when the two blocks of memory are installed, the laptop does not start no more.
  I hear the soft beeps indicating that a problem has occurred. The system works under Windows XP.

  Someone who can tell me how to solve this problem. Thanks in advance for your help

  concerning

  Marten

  Memory sticks are made by the same company? If this isn't the case, it will not work.

• Satellite A60-672 does not start after upgrading memory

  Hello

  I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.

  Peter

  Hello

  I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.

  In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Satellite M30-604 does not start after upgrading RAM

  I have exactly the same problem with a Satellite M30 604! I have 2x1GB sticks and screen stays black. It works if I use one of the 1 GB sticks and one the old 256 KB stick but not the 2x1GB sticks as it should be (according to the specifications of my model manual).

  Boths glue work perfectly, I tried to the sepparately.

  In addition, computer does not work with the single 1x1Gb stick, mandatory I have to combine a new (1 GB) with an old (256Kb), or just stay on the two old sticks...

  What can I do? PLEASE, I BEG YOU!

  Hello

  Satellite M30 can be upgraded up to 2 GB of RAM, but you must use compatible RAM modules.
  As far as I know, you can use the modules of PC2700 and PC - 2100 DDR SODIMM 200 pin.

  I think that you problem is certainly linked to a not entirely compatible RAM modules

• Re: Satellite A200-1AX does not start after the BIOS update

  Hi all!

  I wanted to install XP on a Satellite A200-1AX.
  So I tried to update the Bios to the version that supports supported XP.

  When I tried to install it, crashed Vista and now the laptop won't even turn on.

  When I keep the power button pressed, the whistling fan but nothing happens.
  I think the BIOS is gone or corrupted.

  What should I do?
  Thanks in advance for any help!

  > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

  What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

  In this case, you can do anything you will need to contact the ASP in your country for a fix!

  Don t waste time and ask a technician for assistance.

  Good luck and best regards

• Satellite M30X-122 does not start after upgrading memory

  Hello

  I want to upgrade the RAM in my Satellite M30X 122. Correctly my NB contains 2x256MB.
  I bought a GB 1 333 MHz. Cl2.5 module PC2700 (corresponds to the former, but more grand ;-)))
  Now I build in the module, but after the build-in system is dead.
  It doesn't show anything on the screen (after pressing the button one)).

  Does Anyboby have some tips?

  Thank you very much
  Peter

  Hello

  Toshiba has recommended the use of these memory modules:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Well, the size of 1024MB should be compatible. In this case, it s not a module size.
  Have you tried to get into the BIOS? BIOS recognizes the memory module?
  Maybe the module is broken?

  In my opinion, you should check if the module memory works on a different unit. If this module works correctly on another unit if your M30X doesn t support this module of memory and you need one another.

• Satellite P10 504 does not start after upgrading RAM

  I just sticks of 2 x 1 GB of DDR 400 soddim and no start.
  After reading on what I could find on similar models, now seems that these older laptops cannot manage that fast of ram?

  With the help of some 266 DDR would be more appropriate?

  Hello

  If the computer laptop doesn't boot then there is a great chance that the RAM is either not compatible or it s faulty.
  I think that it s is not compatible.

  I found this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7090&ft=m&St=3

  According to this page the P10 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * bars!

  If your RAM is not compatible!

• Re: Satellite A105-S2061 does not start after upgrading RAM

  Hello activity

  I recently bought two RAM sticks of 1 GB for my laptop upgraded from 512 MB to 2 GB.
  I turned my computer off and pulled out the old RAM and put in 2 GB sticks. I then turned on the computer.

  The computer seems to boot up normally, but all the time he needs to just showed the start TOSHIBA computer screen is turned off.
  The screen never shows anything... it just stops. Several attempts donnГ the same result. I put in one.

  There could be only one explanation.
  The new RAM modules are not compatible, or there is a power outage!

  I guess that the laptop starts properly using older modules. Am I wrong?
  Well, I think you should simply replace the modules with one another!

• Satellite A200-1If does not start after the BIOS update

  Hello

  It is my first time on the forum posting, I hope someone can help me.
  I recently downloaded the latest update of the Bios (bios - 20090121132526.zip) for my laptop. I ran the bios Setup, after the update it restarted my laptop, but then he went to a black screen and no longer start.
  When I press the power button only power led lights, fans begin to turn and the DVD - rom turns and stops and the screen is blank.
  I am running Vista Home premium 32-bit.

  Can anyone provide a solution on what I can do to fix this?

  Was the system standby standby/extended/recovery?

  Its important to cold starts of the system before and after an update of the BIOS.

  You could try to remove one of the modules RAM (change RAM size) and turn on, otherwise the system may need to be sent to an ASP for repair.

• Satellite C660 / 03C does not start after upgrading RAM

  Has decided to upgrade my lappy missed at 4 GB and bought 2 x legend 2 GB L256483J - 16 (2 x 2 GB DDR3 - 1333) chip and will not go beyond bios.

  Put the dirty old standard 2 GB Samsung PC3 - 10600 S-09-10-222 back in and works fine. Then put 1 legend of 2 GB and it works and reads the 4 GB of memory.

  Why it won't work with 2 chopsticks legend?

  > Why it won't work with 2 chopsticks legend?
  I'm afraid there is a compatibility issue of Mr. to avoid these problems, use recommended, tested and compatible memory modules.

  My advice to you is the use of modules from Kingston. The right one, you can find HERE.