Satellite A200-1CR - black screen and no boot

Similar Questions

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• T420s black screen and no boot

  Hello everyone,
  I hope someone could help me with this problem
  I have a T420s that I bought a few weeks earlier, it's a used, so there is no guarantee with it, I used it several days without any problem, I do not use very often I use my business an alone most of the time.
  One day when I tried to turn it on, it stacks on a black screen and it beeps a beep then two other, nothing show on the same screen not the logo of thinkpad at the start, I thought it was a RAM issue about so I put my PC business, but without a bit of luck, so I wanted to see if his graphics controller issue I plug the VGA on laptop and my TV cable, and here I see boot thinkpad logo but after that I see a message on the screen saying: "real time clock error - control of Date and time settings." Press ESC to continue or F1 to enter setup"and when I press either nothing happen at all, always there batteries.
  I'm lost here, can anyone help please.
  Sorry for my bad English.

  It is used, it does not mean that there are no guarantees. If it is sold, the warranty stays with the machine. Check here first:
  http://support.Lenovo.com/en_US/product-service/warranty-status/default.page?

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.

• Satellite L300D-13s - black screen and nothing appears

  Hi, I have Toshiba Satellite L300D-13 s (pslc8e-02p013en).

  I turned off my laptop as usual and when trying to turn it back on yesterday, I have NO screen. I can here it whirring and all my lights are on, my battery is showing green (paying), but all I have is a black screen, no markers, imprecateurs, whatever it is?
  Have I somehow turned off the screen?

  I was in battery saving mode if it has nothing to do with it at all?

  PLEASE HELP - I DON'T KNOW WHAT TO TRY

  Thank you

  Hey,.

  Normally the battery saving mode (stand-by) has nothing to it. On my Satellite L300, it works correctly and I often use this mode.

  In any case, it would be interesting to know if you can see an image on an external monitor. The internal monitor FL inverter is may be defective and so it does not show an image... Who knows? ?:|

• Toshiba Satellite A215-A4757 black screen and unable to initialize

  Received the black screen after trying to download the update of the BIOS; has been logged in as administrator, but received the error 'need to be logged in as an administrator. Could not go further. Process had not begun restore point then minimized and tried to validate the connection as an administrator. Locked screen and got a black screen with errors about bad driver. Doesn't seem to be valid. In any case, I liquidated - power off. Does not power on f11 or any other key - cannot start. Keyboard seems dead. seeing lights to drive DVD could perhaps start with the startup disk. However, do not have (not too smart). Is there a way to get a system of information-based boot disk? I had a previous assignment but did not because months ago. Thanks for any help/suggestions.

  Perhaps your message to: http://forums.toshiba.com/?

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• Satellite A200-1fj - black screen after BIOS update

  Hello guys,.

  I'm planing to update my bios for this version

  http://support.toshiba-tro.de/tools/EULA/calleula.asp?ID=63108

  and my pc got little froze and lag then I close the program that has Flash my bios and restart my turn then black screen... I search and found this thread talking about the BIOS recovery and there seemed not workin for me (I use my 8 GB flash memory) and just do Fn + B when I press the power button to start and then the power led becomes orange... and nothing happens...

  Everyone please provide me the bios file just for this model and give me a clear instruction to Flash my bios with my flash (8 GB) memory

  W8 your replay guys, thx

  + The message was edited: link removed - unauthorized 3rd party Forum +.

  If the BIOS update was not properly flashed, the ROM should generally be flashed with a disc of crisis of the BIOS.
  This can be done by authorized Toshiba available in your country.
  Then get in touch with the ASP to solve this problem.

• Satellite C660 powers, black screen and switches off the power

  Hello world.

  I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

  Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

  I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

  A big thank you in advance, Neil.

  In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
  Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

  Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

  Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.

• Satellite A200 - TJ5---> black screen at startup

  Hi all

  Here is the story:

  Yesterday I played poker with my laptop and suddenly the screen freeze. that is no more keyboard/mouse, time frozen.
  There is no battery in my laptop so I unplugged the power supply.

  When I plugged it in, I pushed the power button. Fan were to happen, the blue leds on the power cord, power came. The hard drive led will begin to Flash. But the screen was black! No backlight at all. The computer seemed to start as long as the hard drive light was lit more after 5 seconds or more.

  I made theses steps 3 - 4 times. No results.

  I managed to control memory, traded the sodimm 2 x 2 giga with sodimm 2x1gig, than i've got, same effect, stay at black screen. Restoration on this...

  WAITED 5 minutes without battery/power cord. Everything started on the right.

  I ran a memory diagnostic tool for 24 hours after that, no problem at all.
  I already have the latest version of the bios.

  In this forum I found the solution to be able to remove, let stand for 30 minutes and the black screen disappeared. But I don't think it's a long-term solution.

  I am concerned about this problem. (Black screen) because I understand that it is a hardware failure?
  Someone to know more about this kind of problem?

  Hmmm. eventually it s a hardware issue, but as you know it's really not easy to provide suggestions without any detailed portable /hardware controls.

  So if you want, you can contact the nearest ASP in your country and can ask for the portable diagnostic test.

  See you soon

• Satellite L650-1EQ - black screen and overheating problems

  Hello

  I have a problem with my laptop Satellite L650-1EQ.
  A few days ago my laptop was overheated quite often.
  I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.

  I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!

  I didn't know what happened and was very scared.
  I turned off the computer.

  The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.

  I turned on the computer and tried to start it again, and the computer started fine.
  The image appeared and the problems disappeared.
  But I knew that something bad was about to come so I took the laptop computer repair technician.

  I told her what happened.
  He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.

  I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s

  I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.

  I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s

  Please help me, thank you!

  PS: I'm sorry for my English, I know that's not the best

  Hello

  This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.

  You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
  But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(

  Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.

• Satellite A200-1CR: Question about upgrade HARD drive

  Hi all...
  I would like to ask something...

  I have toshiba Satellite A200-1cr with 120 GB HARD drive...

  I would like to change my HARD drive. I found a disk hard 2.5 "with 250 GB.

  My questions are the following:

  (1) my knowledge of the workstations are very very good. Is it easy to change myself?
  I guess it is, but I want to be sure... I guess that is on IDE, right? No SATA at all?

  (2) if I changed it I lose my warranty?

  (3) can I give my laptop Toshiba in Greece official store and let them make the change?
  May I take in an informal shop, too?

  (4) can be put on the laptop 2 x 250 GB such US new computers laptops from toshiba?
  Is there enough space in the laptop for such a change?

  Thank you in advance...

  Hey Buddy

  It is good that ask you the question.

  (1) the Satellite A200-1CR supports SATA and no IDE interface and that's why you need a SATA HDD. It of really not difficult to replace the HARD drive and as far as I know, you should find a few details in the user manual. There is a useful statement and photos that explain the entire procedure.

  (2) hm AFAIK the drive replacement HARD will not void the warranty, and has no effect on the State of security.

  (3) you can also contact the maintainer authorized Toshiba in your country for a HARD drive replacement, but in my opinion that is not really necessary because the replacement is not very sensitive. As I said above, check the user manual.

  (4) I don t think that your laptop will support 2 x 250 GB HARD drive.
  Of course, there are a few other series laptops which are abele to support two hard drives but I n t think that your laptop A200 support.

  Just a small comment on the new HARD drive:
  The fact is that some more HARD drive are not supported by the BIOS. I mean an upgrade to 120 GB to 250 GB drive HARD is really a leap one possibly your BIOS would not recognize the HARD drive correctly.
  So I recommend to test the HDD first before buying.

  Good bye

• Satellite A210 - 11 p - gos black screen and HARD drive does not

  Hello

  My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

  I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
  The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

  Not too sure what to do and any advice would be welcome.

  Hey Buddy,

  > I reloaded Windows 7 but still no joy.
  Have you ever tried with Toshiba Recovery disk operating system?

  The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

  That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.