Satellite A200-1IW waking up from the idle screen mode - black

I lost the instructions "Eve". I have Vista 32 bit official A200-1IW.
A few days ago, I noticed that by pushing the "sleep" button I get one screen is turned off.

Hard drive is working as processor (I hear the fan works) and seeing only flashes red. Incidentally, Hibernation is still alive (powercfg/h on) and hybrid sleep mode is turned off as it was before in power management. So I made no changes in the BIOS and in the registry.

Enough of tender regular Vista upgrades. And thinking about it, I ve tried to recover the System State which was confronted with the problem. No difference. I used in the powercfg /a command line it shows S3 is active, S1 and S2 is not supported.

I ve tried to change the power management settings and get no results. I can use the hybrid sleep mode, but I put t like it. Now the "sleep mode", single screen is turned off.

Can you help me with my problem? I found a similar problem in the forum...

PS. I disable LAN, I have not all updates are running and other applications. Maybe some service is hunging this mode and in that case why is the work of hibernation?

I think that the solution is simple.
You must update the BIOS and the graphics card driver.

I read here in the forum that it must be a solution for these problems with the mode 'sleep'.

Access the Toshiba driver page and choose your laptop and Windows Vista.
Update the BIOS, then the graphics card driver.
Restart the computer to update the latest Vista patches and reboot again.

Once this laptop procedure runs correctly

Tags: Toshiba

Similar Questions

  • Satellite A200-12s - not boot from the CD/DVD drive

    Hello

    My Satellite A200-12 s does not start on CDDVD. It is well recognized in the bios. In the trunk is first CDDVD. Under Windows, it works perfectly.

    Thank you for your help
    Thanks to Google translation.

    BIOS Version 2.60 64bits

    Hi michel_91,

    If the drive works properly in Windows, it seems to be related to your startup disk. I put t know which drive you are trying to boot from, but you should try another. Maybe it s scratched or something else in order to test another.

    Check this box!

  • Satellite A200 - Crackle sound comes from the HARD drive

    Hello

    I have the Satellite A200. When I start my laptop the patter comes from the hard drive.
    Someone knows something about it?

    Thank you
    Vikas

    In my view there s nothing wrong with your HARD drive.
    My drive HARD click every time while accessing data on the laptop and everything run ok for 3 years.

    But that doesn t mean that there is no hardware problem with your HARD drive. Usually it's not easy to tell when a HARD drive wound begins to malfunction. My first HARD drive died after 6 years of use. But the other HARD drive died after 1.5 years. This damage was covered by the warranty.

    Finally, I would recommend backup your data always on an external HARD disk to prevent data damage.

    Good bye

  • Satellite A200-130: done remove from the hidden partition void warranty

    Hello

    remove the hidden recovery partition will void the warranty on the Satellite A200-130?

    No, certainly not!

    You can delete what you want ;) you can also install a different operating system.

    You would lose the guarantee only if you open and disassemble the laptop or attempt to upgrade not upgradable components such as CPU for example.

    Just for the note; You can set the laptop back to the factory settings using the Toshiba Recovery CD.

    This would create a new hidden too restore partition.

    Greetings

  • Second HARD drive is possible on the Satellite A200-1iW?

    possible second hard drive on the Satellite A200 1iW?

    Hello

    Not all models of laptops A200 supports the second HDD.
    If you want you can find very easily if your laptop supports this second HDD.

    At the bottom of the device, you can find the second HARD drive Bay. Remove the cover that protects the Bay and check if there is some HARD drive connectors.

    If not, then the second HDD is not possible

  • Satellite A200-1IW: victory 8 - ATI Radeon HD 2600 cannot set 1920 x 1080 @60 Hz

    Hello!

    I have a problem with my Toshiba Satellite A200-1IW and its resolution on the monitor 22 '' VGA.

    I decided to switch to win7 for win8 and got stuck on this annoying problem.
    I can't get 1920 x 1080 Hz @60 on win8 even though he had no problem doing in win7 (I just had to clear the field "list all modes" then choose 1920 x 1080 @60 Hz in the list).

    Now I see that resolution of 1920 x 1080 @23, 24, 25 and 30 Hz.
    None works for me. A

    No idea how to solve this problem?

    If you n t deactivate the option called: Hide modes that this monitor cannot display.
    Then, you will get a complete list of modes that are not supported by display.
    In this case the display may be damage or affected.

    I think that it is perhaps one of the reasons.
    Send the reason: 8 win is not official on the market, and I guess that some graphics card drivers will not work correctly.

  • Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

    Hello...

    Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

    The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

    ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
    Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

    First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

    Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

    Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

    Windows tells me that it was impossible to find a driver in the any of the archives...

    The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

    Any help would be greatly appreciated,
    Tasos

    P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

    P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

    This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

    Hello

    Regarding the sound issue.
    A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    You will need to install KB888111 and KB835221 hotfix

    With regard to the BIOS;
    Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

    Good bye

  • Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

    I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

    * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

    Hi jsserrano68,

    Read the following article about the product keys for Windows:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

    In addition, if you need to contact Toshiba support:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

    Thank you

    Deb

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Officejet 6310 all-in-One: can't send faxes from the computer screen

    We use an Officejet 6310 all-in-one printer. Computer of my wife, a laptop Toshiba Satellite Windows 7 Professional, has suddenly come to the point that it will no longer send faxes from the computer screen. We get an error message that something must be installed or reinstalled. We have lost the CD of the software provided with the printer. We can send a fax if we have a document printed to power the machine, and we can print faxes. We lose a lot of paper and ink because of this problem. Help, please.

    Hi GregsterMc,

    Given that the Fax icon is not displayed in the window of printers and devices, you need to uninstall and reinstall the software again. This should solve the problem.

    Thank you.

  • How to remove email from the lock screen in iOS10?

    In previous versions of iOS, you were able to delete emails from the lock screen.  Now in iOS10, the only options are 'View' and 'clear '.  Seems really stupid if Apple disabled this feature, as it has helped to manage the spam I receive without having to get into my mail and clean.

    Thoughts?

    It would interest me, is really very silly.

    In German:

    Habe ich Täglich mit sehr vielen emails zu tun. ICH konnte sie immer too im Sperrbildschirm löschen oder als markieren read equal. Das ist jetzt nicht mehr possible.

    Jetzt muss ich jede E-mail erst im Sperrbildschirm lassen um sie dann löschen oder als zu markieren read ads.

    Warum wird eine Funktion removed einfach so?

  • I want to remove the other icon of the user from the logon screen.

    For security reasons, I would delete the other user option from the logon screen.  I am running Windows SteadyState 2.5 with the Welcome screen option.

    Any help much appreciated.

    When you use steadysate, the other user option will be present on the logon screen.

    Uninstalling steadystate will solve the problem.

    If not, please transfer your question in the Sub forum

    http://social.Microsoft.com/forums/en/windowssteadystate/threads

    If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • BlackBerry smartphones can not type the names of the contacts from the home screen

    I have a Bold 9700 5.0.0.54 5 running with bell mobility. When I upgraded to this version I am able to type in a contact name from the home screen to dial them. I must now go into the address book and then type their name. I can only enter the numbers directly from the home screen. Does anyone else have this problem?

    Its still set to Yes.

    I just tried fiddling with the options of entering text (extinct since shortened ID and language selection) and it started working again. I returned these back to the values previously and it still works. I feel there is something funky with the selection of text entry and the home screen...

  • Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

    I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

    I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

    Hello

    See how you go with this great piece of software.

    http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

    Concerning

    GT4U

  • tiles Windows 8 app has disappeared from the splash screen

    My computer has forced a reboot for an update today and after I back in all the tiles from the app (weather, photos, applications purchased in-store, etc.) had disappeared from the start screen, with the exception of desktop computers and store.   Nothing seems to be disturbed in desktop mode this just seems to be the Win8 apps.   I didn't install anything (with the exception of windows updates).   How to bring back these tiles?

    Windows key + X, select command (Admin) prompt and type sfc/scannow and return.  If it detects and repairs system files, run it again until no error.

    If this does not correct the situation, you must do a refresh install.

  • Impossible to select the value from the search screen (quick select, then) on OFA

    Hello

    We have a problem with a user who are not able to select any value from the LOV on any page of the Oracle.

    1. click the button of LOV

    2. search + go

    3. Select or quick selection nothing happens (error on the Page appears in the left corner of the homepage)

    4. only cancel works.

    Any suggestion would be appreciated.

    I saw a similar question posted Impossible to select the value from the search screen (quick select, then) on OFA

    But unfortunately this is not the answer.

    Thank you

    Sam

    Display of the solution to help others. I tried to connect a SR and suddenly a pop Note ups that helped.

    The problem is related to the profile "Self Service Accessibility Features" customer has defined for the user concerned.

    Follow these steps:

    1 change the value of 'None' profile at the user level.

    2 disconnect / connect to the application and testing.

    See you soon.

Maybe you are looking for

  • External ISight not recognized under macOS Sierra

    Upgrade to Mac OS Sierra of El Capitan on my Mac Pro (mid 2010) and everything worked very well.  However, I noticed that Siri could not hear me through my external iSight connected via Firewire. Then I noticed that the green light is not on, and the

  • No Spanish language

    My Alcatel 6015 X (ffos 1.3.0.0) have no Spanish language in the language menu. English, Russian, French, Romanian (why?) How can I solve this problem? I need Spanish keyboard and menu.

  • And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

    And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  • Zero DAQ reset

    Can someone tell me how to reset a diagram LabVIEW data acquisition card without using MAX Program? After the failure of a test, LabVIEW will leave the reverse PIN. Then, when I run the test again, it will continue to fail unless I have manually clic

  • Printer print

    My printer HP Laser Jet 1020 one stop print requests. The message that appears en red is that it is not connected. However, the printer is properly connected and test pages have been printed without problem. I have de-connected, re-connected, uninsta