Satellite A200-1MD - Flash memory card does not

Whenever I start the laptop black screen appears with the hanger with message * Flash card (not answer). * After some time it goes without saying. The date of installation/upgrades of this software is on March 7, 2007.

Please guide.

Hey,.

Hmm... It seems that the problem is related to Toshiba Flash Cards as they appear if you press a FN key... In other words, they control the function FN key.

You should check the site Web of Toshiba. You can find this tool then you should try to reinstall. So delete the current version, restart the computer and install the latest version of the Flash Cards Support utility.

Tags: Toshiba

Similar Questions

  • Satellite A200-1VP - new WiFi card does not work

    Hi all

    I just bought an intel 4965agn wireless card to replace the original card intel 3945abg. I bought the card on ebay, it's a computer dell laptop.

    I installed it (connecting the black wire on pin 2 and the white wire to Terminal 3). The device appears in the device manage correctly without any problem. I installed the latest driver from intel for this card.

    the problem is that no wireless connection cannot be captured. the utility intel built in diagnosis, the card seems to fail the test of material. The section troubleshooting said to check the Device Manager and install the appropriate drivers. I've done it before, so I'm not sure of the problem.

    any ideas?

    Thank you

    Hi ansarali,

    Why you traded a new WLAN draft N card if you can t use it? I want to say that your laptop was only equipped Intel abg card and for standard project you also need 3 antennas and as much as I know Satellite A200 are not equipped with 3 antennas

    In addition, the antenna cables must be connected correctly. This means that you must connect the white cable to the HAND and the black cable to the auxiliary voltage
    Check this box!

  • Equium A100-338 - Flash memory card does not

    Whenever I have close World of Warcraft, something appears in the upper left corner (looks like it must be a window but only on bar showing) which reads "Toshiba Flash Card (not answer). What can I do to prevent this?

    Im sure he appears during the game as well as I hear a ringing sound.

    I have an Equium A100-338.

    Thanks for any help!

    Hello

    a solution may be turning off the flash card service if Don t you need your USB.

    You can disable it by following these steps:

    -Go to start-> settings-> Control Panel-> administration-> Services tools

    -Make a right click on 'Smart Card' and left click on "Properties".

    -In the window who pop´s you must stop the service and disable it with the "Disabled" choice to the option "Startup Type".

    After that, your flash drive service is disabled and that you won´t get that annoying more errormessage.
    (I hope so: O)

    Welcome them

  • Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

    Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

    The following steps may be worth a try:

    Insert your memory card into your Media Player...

    Reach... Start / computer...

    What is the memory card show as a drive letter? (if your Media Player)
    has several slots, there will be several "hard drives" listed... the
    SD card will be one of them)

    If_Yes_right click on the drive letter correct and in the menu... Choose...
    Open... now you should see the directory of the memory card or to explore.

    From there you should be able to drag and drop or copy and paste the
    files in a folder on your hard drive.

    Also... the following items may be worth a visit:

    Windows Vista-
    Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista-
    How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

    Windows Vista-
    AutoPlay: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  • Satellite A200-209 (ETA) shortcuts keyboard does not work in Windows 7

    Hello

    I have a problem with the hotkeys (Fn + some button) - they do not work.
    I think that the update of the bios can help, but I can't find the bios for Windows 7.
    I'm wrong or updating the bios will not help?

    Thank you...

    Hello

    I doubt s BIOS problem running Win 7.
    You need VAP (value added package) and utility of Flash memory card Support.

    I installed VAP and utility Support Flash Card which are released for other series laptop because my laptop is older and Win 7 tools are not out on my model.

    However, I chose the VAP and Support of Flash Card Utility for L500
    It worked.

  • Satellite P850-133 - extended graphics card does not work

    Hello!

    I got my 2 new p850-133 and they have reinstalled with a new copy of Windows 7, and then the extended graphics card does not work, he said: "code 10" failed to start, what to do, the hd4000 intel integrated works really well.

    Hello

    The laptop is equipped with a GPU NVIDIA® GeForce® GT630M.
    The European driver Toshiba page provides 3 different display drivers.

    2 drivers for nVidia GPU (v296.0 for the 3D and v296.01) and one for Intel (v 8.15.10.2712).
    You must install the Intel driver and one of the nVidia drivers.

  • Memory card does not work on my Satellite L305D-s5893

    Hello

    I reinstalled the operating system and downloaded the drivers from Toshiba s drivers page, the only driver (I thought) doesn't you work the card reader.
    I put an SD card in the card reader, but the OS does not read anything.
    Is there another drive for the card reader, or maybe the card reader does not work?
    How do I know this?

    Hello.

    If you can not use the driver from Toshiba, it is without doubt that the pilot is not suitbable for you. Toshiba has a lot of brands for Satellite L305, you may need to look at the correct driver for your model. From my experience, apart from the value Pack provided by Toshiba, I'll use Windows Vista update to find the most recent and correct drivers and download driver GP of supplier of the graphics card for my laptop after each new installation.

    Hope this can be your answer.

    Kind regards.

  • Satellite A300 - 20 p - MS Pro Duo memory card does not work

    I have a laptop Toshiba Satellite A300 - 20 p and MS DUO memory card stopped working.
    He always asks me to format the card.

    I tried three cards of the same type, but still the same problem.
    The cards work in my PSP and my Sonyericsson mobile as well as all computers laptops hp.
    I gave the phone to service center Toshiba here Bahrain and they tell me that this card is not compatible with Toshiba, but this card has worked before in this same laptop...

    My laptop isn't even four months, and this is the response I get.
    What is the use of the international warranty of two years if they cannot solve the problems...

    Please help me so sad, I bought a toshiba laptop...

    Thank you

    Hello

    The computer s laptop Satellite A300 card reader - 20 p are supported on these cards:

    8MB - 2 GB SD card
    4 GB to 16 GB SDHC card
    16MB - 2 GB xD Picture card
    Memory Stick 8 to 256 MB
    Memory Stick Pro 256 MB to 4 GB
    8MB - 2 GB MultiMediaCard
    miniSD (with adapter) 32 MB - 2 GB
    512 MB - 4 GB microSD (with adapter)
    Memory Stick Pro Duo(with adapter) 256 MB - 4 GB

    As you can see the Memory stick Pro Duo is compatible and can be used with the adapter. But only card up to 4 GB are supported.

    In your case I recommend you remove the card from the card reader location.
    -And then uninstall the driver from card reader in Device Manager.
    -Then download the driver for the card reader from the European driver Toshiba page.
    -Then install the card reader driver
    -restart the laptop and check the card reader again.

  • Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

    I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

    What can I do?

    Hi navarone_1,

    This means that the work of FN keys and you can t use the pad touch, right?

    Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

    You can find all the drivers and tools for your laptop on the Toshiba official European page:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

    Last but not less than first installation package of added value and Flash then cards support utility.

  • Re: Satellite Pro A60 - PCMCIA WLAN card does not question CardBus

    I received an A60 to upgrade for a friend and one of the necessary things is a wireless card.

    I got a 32-bit cardbus card but when I insert into the laptop, nothing happens. XP does not recognize, the oo lights do not come on the map.
    First I thought it was a faulty card but I tried other cards and get the same results and I reinstalled XP and all the drivers but nothing.

    I've seen other messages on the change of the mode in the BIOS, but there is no mention of the CardBus in the BIOS.
    The laptop uses the BIOS version 1.9. I just want to check is there something escapes me or the CardBus location just does not work?

    Hello

    Satellite Pro A60 was equipped with the 32-bit and 16-bit PCMCIA slot that supports PCMCIA card * Type-II * only!

    Have you used the * PCMCIA Type-II card?

    Perhaps you have used is not compatible PCMCIA card, you should check this first!

  • Satellite 2410-413: USB2 PCMCIA card does not work

    Hello. This is my first time on a forum, and my English is bad.
    I tried to install a card PCMCIA 4 port USB 2 (hw & sw) on my Satellite 2410 413 in order to use a dongle of DTV (hw & sw).

    This will not work: ports seem to be declared straight into the computer, but in fact, a simple key memory 64 MB USB-2 [a Sony "micro-vault" key), won't work, and neither will the Winfast DTV dongle.]

    Paradoxically, both the key mem will work on any of the three USB-1 ports, and the DV dongle will light on any port USB-1. The PCMCIA 4 port USB 2 card is new. I can't locate the source of the problem.

    Could someone help me with this issue?
    Thank you in advance for your answer. Here it is (maybe?)
    Another way of formulating the question: how USB ports are managed by the system?

    Hello Rasta

    Sorry, but I think that this issue should be the right one for producer PCMCIA. Try to visit the support page. You might find answers.
    Believe me on this path it is not easy to say why this happens. Toshiba is perhaps responsible for the functionality of PCMCIA card, but not used the card.

    Good luck!

  • Satellite L300-17N (PSLBCE) - wireless card does not work

    Hello

    I recently bought a Toshiba Satellite L300 (PSLBCE) that came without any operating system and the dirvers. I installed WXP PRO SP2 above and downloaded all the drivers from the Toshiba site. Everything has been installed ok and functional except for the WLAN card. The wireless network card, it is a Realtek RTL8187B but it is not recognized by my laptop: if I Check Device Manager it does not appear (it does appear that "Network controller" with yellow mark). Then I went to Realtek website and download new drivers from there and installed again... also with these dirvers WLAN card still not recognized.

    No idea this coud be the problem? I don't know that I have downloaded the correct dirvers from Toshiba Web site as well as the Realtek site... but none of them helped. The chipset drivers have also been installed and also the last BIOS version (my BIOS version is newer than the one on the site of toshiba with the drivers for this model)
    May this be a conflict with the other dirvers or WXP PRO SP2?

    Thank you

    Hey Buddy

    Satellite L300-17N does not support Realtek RTL8187B but Intel 11 a/b/g (13ch) - Golan Wlan card.

    I recommend to visit the portal of Toshiba Europe WLan and recommend to download and install the driver Intel WLan from here:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Here, you can try the Intel PRO/Wireless 3945/4965/5100/5300 driver package!

    I would appreciate your comments

  • Satellite A200-1js: local network connection does not appear

    Hey people

    I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:

    And in my etiquette system shows this:

    I installed the correct drivers

    Everyone knows what is happening?

    Thnkx

    Satellite A200-1js belongs to the PSAE6E series.
    Just a few questions:

    You would update you BIOS to the version of Win XP?
    If it isn't-> do this!

    Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
    If it isn't-> do this!

  • Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

    Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

    Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

    I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
    Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

    I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

    Help required, please.

    Hello

    Uninstall the existing touchpad driver and install it:

    http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

    Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

  • Satellite A200-14F - standby and hibernation does not work

    Hello
    I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

    I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

    If you have had the similar problem please write what I have to do.

    Concerning

    Hello

    > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
    After Installing Win XP, you must update the BIOS to the XP version.
    You should check the page European driver of Toshiba. There are BIOS for Win XP.

    After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

    Welcome them

Maybe you are looking for