Satellite A200-1NF needs time to read the USB flash drive

Similar Questions

• Satellite U400-10j - how to boot from a USB flash drive?

  Hello

  I have a Toshiba Satellite U400-10j.

  I have Ubuntu on my USB flash drive, now I want to boot from it.

  I can't find the option in the BIOS to boot from the Usb flash drive.

  Second, I noticed that the phone also has an internal memory card reader.
  I could load Ubuntu top then to start the memory stick as well?

  Your help will be very appreciated.
  Thank you.

  I think that it s not able to boot from a USB key on this laptop.
  The best way is to use a CD. There, you can start on this notebook and all other laptops.
  In the Internet there are many versions of CD of Ubuntu and other Linux systems.

  And as said Feliks, it s not able to boot from an SD card because it is not in the BIOS.

• Impossible to get the USB flash drive to work

  I have a new Satellite L500 with Windows 7 and it will not recognize/install the USB flash drives. A msg comes up saying "software device driver has been properly installed. I tried several flash drives - they are OK & work on other machines - including an another Toshiba running Windows 7.

  Other devices work in the USB ports, so the ports are OK.
  Windows cannot resolve the problem, I have checked all USB drivers are updated in Device Manager & made a system of analysis of file without success.
  The Bank recommended a reload & restore factory default - other options?

  Have you installed driver chipset?
  Your laptop comes with Vista or Win7?

  You have just upgraded to Vista or Win7 clean setting?

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• Satellite A200-13O: need some answers on the upgrade of RAM

  Hi there everyone,

  I bought the Satellite A200-13O and I found in the forum Jayjay says:

  Bq. "the laptop can be upgraded up to 4 GB (2 x 2 GB). But the Windows operating system will not recognize the full 4 GB. He acknowledged only 3 GB due to the limitation of the 32 bit OS': 0

  Q1 - is saving 1 GB of RAM cause any problem, when is not used?

  Q2 - can spare 1 GB waiting in my book up is 32-bit upgrade to 64-bit?

  Q3-How can I upgrade CPU 32-bit to 64-bit?

  And just need to confirm a report of R2D2 on notice the guy with A200 - 14 d that have 'problem with RAM', which is similar to my confusion-

  Bq. "... The laptop was equipped 667 Mhz modules, but the FSB supports 533 Mhz max. That's why the modules run max with the speed of 533 Mhz (dual channel)... »

  Q4 - can I install 2 x 2 GB DDR2 667 MHz PC2 - 5300 SO - DIMM despite FSB run just 533 MHz?

  PS: could you recommend good antivirus, I am not satisfied with norton because it is really really really slow!

  Thank you all for the advice (!)

  Hello

  This article may be interesting for you
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  T1 NO.
  Q2 Yes
  Q3 as described in the technical paper 4 GB will be recognized if you install Vista 64-bit.
  Q4 Yes as you can.

  Antivirus, for me, is better AVIRA antivir - http://www.free-av.de/en/index.html
  The application doesn't have a lot of resources and works perfectly. I use it for years.

  Good bye

• Laptop HP 17 p100: how the usb flash drive big that I have to create a system of 10 Windows Recovery?

  How the big usb flash drive do I need to create a system of 10 Windows Recovery?

  Yes

  Hello;

  Let me welcome you on the HP forums!

  There is really no way accurately guess in advance, with one of the reasons being that the options are available when you do this.  An option creates a recovery drive minimum with what is needed to repair the operating system.  Another option creates an image that is able to completely restore the operating system and its partition.  Thus, the size can vary from 4 GB to the size of the partition to the OS.

  Myself, I found as build-in recovery to be unreliable, especially those of Ms.  So instead, I use a third-party imaging/restoration solution known as Macrium Reflect.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• WiFi connectivity weird when I plug in the USB Flash drive?

  I found this WiFi connection problem a few days ago, when I plugged a USB Flash drive in "USB port right side' of my MacBook Pro.

  Every time when USB , WiFi won't work - the connection is lost and can not connect to any hotspot even turn the WiFi market.

  I found more weird, ONLY this brand and model key USB could be the abnormal Mac WiFi.

  

  This problem will not happen to another USB port even I put the Flash drive in the left side, USB port, weird isn't?

  Conclusion, this flash drive cannot be used with USB port on the RIGHT side, another USB port works fine. If WiFi don't work.

  All other USB devices I've owned are working very well on the USB ports on the right or left side.

  Could Apple support or any helps me to understand why this happen?

  PS. I had the Apple's Diagnostics and received a message "no problem found".

  PS #2. Right - same USB port side and next to the HDMI port on MacBook Pro 13 "model 2015" (snack for someone who confuse average left or right)

• All deleted files from the USB Flash drive!

  I have windows XP Professional on my computer and these days I have a problem with my USB flash drive (CCPC USB flash disk USB Device. I have a very important document that is stored in it and when I plug it into my computer it shows no content of the flash player automatically (as it was).

  When I click on the peripheral E: removable where is the flash drive, I get the message that the disc is not fomratted, would you like to see it format it now? I say no, and nothing happens. When I say yes, he says he must delete all files in the USB drive, but I don't want them should be deleted. What has caused this and what can do to save my documents are deleted?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• I lost memory to the usb flash drive space, help me please.

  I formatted 2 gb usb flash drive, and now he has 247 MB of available space.
  in computer SCIENCE, I chose flash drive (E), then right-click on it and choose FORMAT.

  Hello

  1. What is the number of brand and model of the flash player?

  I suggest you plug the flash drive on another computer running on Windows 7 and check if the problem persists.

  You can try to format the drive falash using MS DOS and cehck if that helps.

  (a) click on the start menu

  (b) prompt to type in the start search bar (run as administrator command prompt)

  (c) type "format [drive letter]:" at the command prompt, replace "[drive letter]" by the letter of the drive you want to format.

  (d) then press the Enter"" key. Note that the drive letter must be followed by a colon - for example: "format c:".

  (e) support on 'Y' If you are prompted to confirm if you want to erase everything on the hard drive. Confirm that you want to continue. MS-DOS will start to reformat your hard disk and all data

  on the disc is erased.

  If the problem occurs on another computer as well, then the issue may be with the flash drive corrupted, in this case, you can get in touch with the manufacturer for assistance.

• A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB

  Hello

  I bought a new USB (attachment 4 GB) Flash drive.
  And I had a problem installing it.
  The same drive Flash was wel work with my friends laptop that has windows XP only.

  Someone of you can give me a solution for this problem.

  Concerning

  François kervevan

  Go to the nursery of the device and remove all USB Device Manager USB controllers and root hubs ports!
  Restart the laptop and after the new installation of USB port try to connect the USB 4 GB drive again.

  Good luck

  By the way; If you use Vista on your laptop, please update the last State and also install this patch:
  http://support.Microsoft.com/kb/941600/en-us

  Good bye

• want to 750-114: the usb flash drive boot / bios ver FRIEND A0.12

  Trying to set the Bios to boot from to insert a flash drive but does not. What do I need to turn anything, or press any key combination? Please provide instructions. Thank you

  Hello @felihdez,

  Welcome to the Forums of HP Support!

  I read your post on the matter of BIOS and wanted to help you!

  First of all, try to review the following document and let me know how it goes:

  HP computers - configuration of the Boot order in the system BIOS

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• USB Wizard will not automatically install the usb/flash drives

  Hello

  Working on a laptop, I have a strange problem. Insertion of a usb device (disks hard usb flash are all that I tested) opens the new hardware Installation Wizard.
  If I choose "Install the software automatically", the wizard still fails. If I select "Install from a list or specific location", then choose as location c:\windows\inf, it still works. The wizard should not be checking this place on its own?
  Things I've tried:
  -Reinstall the USB devices in Device Manager
  -Microsoft Fix it 50052
  Gateway, MX6441 laptop
  Windows MCE
  Service Pack 3
  All the important updates installed
  Any ideas would be appreciated.
  Rick

  Hello

  It seems that Windows loses somehow USBSTOR.xxx files in the C:\Windows\INF folder. You can simply copy them from (C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3) to C:\Windows\INF, and that might solve the problem.