Satellite A200-1RK: how to connect to internet

Similar Questions

• Satellite A200-1AX: how to connect to the TV HDMI port

  Hello

  I'm owner A200-1AX (PSAE6E) computer laptop with ATI Mobility Radeon HD 2600. The video card is supported hardware high-definition audio and video, but it has connector HDMI No.. I want to know, if there is any way to connect to the laptop to the HDMI in on the TV?

  Thank you!

  No way dude you can't connect the laptop to HD TV if the laptop doesn't supports HDMI port.

  Some series of laptops Toshiba as P200, X 200, G40, etc. are supported the port HDMI but not an A200

  Good bye

• Satellite A200-1RK error starting upwards

  Hello

  I hope someone can help me.

  I'm not very skilled when it comes to technology please bare with me. My mother has a laptop Toshiba Satellite A200-1RK whom she had for a few years now. She recently dropped it and when she turn back comes up with an error message saying "windows did not start, a recent hardware or software change might be the cause" then it gives you 2 options, 1 is a recommended recovery option and the other just trying it to load windows.

  I tried both and they come just with the windows loading screen and doesn't progress t from there. Anyone got any advice on how this could be repaired. My mom has a lot of pictures that she didn't get round to the backup to the hard drive and you can understand what is important to her. Perhaps this is a case that something has been knocked out of place when she dropped him, I do not know Mr. should I consider in a store to get fixed? I put just t like going to these places if I don't have to because I am very little knowledge about the jargon of techno etc.

  Thank you.

  Hello, Debbie

  To start Windows in safe mode, try to please.
  Start Notepad, and then press F8 repeatedly to display the advanced startup options.
  If it has listed the safe mode option, chose him and press ENTER.

  Please let us know if it will work.

• Satellite A200-1RK: Local Disk F is not available after the recovery process

  Can someone help me?

  I have a toshiba Satellite A200-1RK laptop.
  Usually when I click on where it says MY computer I get three things they are Vista C and dvd rw drive E and Local drive F.

  But after a virus on my laptop and the only way to get rid was a full recovery I did OK.
  But after that I noticed that the local disk F is no longer there when I click on my computer the other two are still there.

  Someone can help and can understand what I'm on everything

  Hello

  1) click on the start menu
  (2) right click on computer and click on Manage
  (3) open the category storage and click Disk Management. Here, you will find your partition (s) to your disk.
  I don't know what you have here exactly, but I guess your drive F is localized. Right-click on it, choose, make new partiton, and follow the steps. It will be published.

• Cannot retrieve the Satellite A200-1RK - error: 18121 COMPONENTS. SAV

  Hiya,

  This is it, I got a laptop TOSHIBA Satellite A200-1RK for only less than a year and currently just started to experience problems in this regard.
  So I decided to restore the computer to factory settings using the recovery disk supplied with the notebook. After that the following instructions which recommended that the process started to get succesfull until after 100% invites it commond came suddenly with the following error:

  [Error: 18121 C:\Windows\System32\config\COMPONENTS.] SAV

  Error image restoration.

  The specified image file did not contain a resource section.

  ERROR: ImageX could not apply VISTA E:\05241XP.swm Index 2 weird to C:\.
  Press a key to continue...

  Then, when I press a key, it remains on a white screen and with TOSHIBA down right and don't turn...
  Then I restarted using the power one button came the following:

  Windows could not start.
  A recent hardware change followed by instructions to use the vista DVD and recover the PC using that...

  Help would be greatly appreicated as the laptop does not work... Thanks in advance...

  Hello

  Hmm strange I have never seen anything like it.
  But according to the error message that imagex could not apply VISTA E:\05241XP.swm Index 2 of ODD to C:\ there was a problem copying some files from E to C (from HARD disc to disc).

  Have you tried to boot from the recovery again disk? If this isn't the case, then try it!

  If you will not be able to restart the laptop using the Toshiba Recovery then disk you should check if it s possible to boot from the other bootable discs like Win XP or similar.

  But if none of these disks will work then a hardware problem is possible. In this case I recommend you first HARD drive.

  Good luck

• How to connect to internet on my xbox so I can access live and play online?

  Original title: unable to connect to live in barracks.

  I am in the Navy and I live in the barracks. To connect to the internet here, whenever we record in us get redirected to a page where we are required to accept a terms of the convention of use until we really connected. On a laptop, all I need is hit access Internet accept button and "poof!" On an xbox, I can't connect at all because there is no way to accept the terms of use beforehand. How to connect to internet on my xbox so I can access live and play online?

  Hello

  Check the link for Xbox support:

  http://support.Xbox.com/en-us/home

  In addition, the link and post your request in the forums of games to help:

  http://forums.Xbox.com/GFW/default.aspx

• I use the g5 U800 mobile.i need to know how to connect to internet from my mobile to pc.

  mobile g5 Internet connection for pc

  I use the g5 U800 mobile.i need to know how to connect to internet from my mobile to pc
  Hello
   
  You must have GPRS activated from your network service provider.
  
  To connect the phone to the computer, you need a PC suite installed on the computer. If the phone manufacturers have supplied PC suite CD, then install the software on the computer.
  The operating system on the computer and the mobile phone are different, so communication is not directly.  PC suite software acts as a mediator between the computer and the phone and helps to establish effective communication between the phone and the computer. If the CD is not provided, then look for in PC suite online and download it.
  
  Reference: Connect to the Internet via a mobile phone Bluetooth active
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-the-Internet-using-a-Bluetooth-enabled-mobile-phone
   
  Thank you

• Learn how to connect to internet from pc to mobile phone with a usb cable

  I want to know how to connect to internet from pc to mobile phone with a USB cable

  'S called it tethering.

  1. Search for this term in the manual of your phone.
  2. Search for this term in the contract of your phone network operator because not all telephone network operators allow tethering.

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• Satellite A200-1UV - how do I print the screen?

  Hello-

  I have Toshiba Satellite A200-1UV - can someone tell me how to view the screen, I'm looking.

  For example how to print 20-30 small jpg.pictures screen I see when I open a folder with photos of som I in the folder?

  Can I copy a put in a document, and then print or I can choose all the images and print them on plain paper?

  Thanks by

  Hello

  You can print the screen using the keys CTRL + print
  Now you must open a graphics editor like paint or something like that.
  In paint, click new file/photo and then use the CTRL + V keys to past the print screen.

  Welcome them

• Satellite A200-130 - how to remove the BIOS password?

  Would you help me how to remove the password of the BIOS for the Satellite A200-130 PSAE0E-00Y00YAR model?

  My laptop was asked to enter the password when I put under tension.

  Hello

  Just check this article:
  [How do I remove a BIOS password if I forgot it? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]

  As you can see it s not possible to remove the BIOS password. It can only be done from an authorized service provider.

  So, you should contact the guy and ask for help. They are able to remove a password from BIOS :)

• Satellite A200-08J: how to configure the command buttons

  I read many posts but nothing seems to make sense.

  Why Toshiba would put these buttons here if they are so difficult to configure? or not able to be configured?

  FYI same Windows Media Player does not meet any of them.

  I use Vista Business 32...

  I would like to configure all the 6 buttons next to the button On / Off (internet, media, play/pause, stop, previous/next.

  Thank you...

  Hello

  To my knowledge, not all keys are configurable. The buttons like pause, play, stop, etc. cannot be configured with different functions.
  It is not possible.

  But you can use the key Toshiba control utility to configure the buttons such as Internet and CD/DVD.
  You can find this tool in Toshiba Assist-> optimize

  There you can assign new applications to these buttons.

  By the way; Satellite A200-08J seems to be a model Canadian that is why it would be desirable and recommended to use the drivers & tools from the Canadian driver page.

  See you soon

• Satellite M40X-189: how to connect RGB port to port RS232?

  Hello
  as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
  I work with device of automatic titration requiring the RS232 port for connection!
  No idea how I can connect my laptop on this unit!

  pls help
  Thank you
  Omrankl

  Hello

  AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
  But I found the site useful:
  http://www.Ontrak.NET/USB.htm

  You will find a description how to connect the USB port to an RS-232 port.
  You need an interface ADU.
  Click on the link.