Satellite A200-1TP - the high temperature of the processor

Hello, I have never had a problem with my laptop up to now... I was playing a game when I couldn't play more because my keyboard was raging on the left side.
I checked the temperature of the cpu and it was 80 c! I don't know too much about temperatures, but I think it is too high.
I closed the game and he lowered to ~ 60, then I tried a program called orthos to check the performance of the PC while making 400 iterations of lucas-lehmer and it reached 95 C! OK, it's time to do something.
I tried to format my laptop and see what happpens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower. I tried to clean the fan with a vacuum and I think it helped a little... I dare not open my phone because I don't know that I'll break it.
The fan is not broken, it is running, I tried using 'speedfan' change rpm, but this program does not detect my fan so I can't do anything...
I don't know why this is happening. I was so happy until now... I would like to repair the laptop, not to buy a laptop cooler, then... what I need to do?

Thank you

-Furthermore, the disc is 41 c and GPU temperature is 27 c, I think these are ok.

Hello

> I tried to format my laptop and see what happens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower.

No contact, the temperature will not stay if you run applications of high performance as the games for example.
Running high-performance programs all internal devices must run with max performance which leads to a higher heat dissipation and this leads to a higher temperature

Of course clean dust cooling modules and debris should help cool the laptop better but it won't change the fact that you will always see a higher temperature, running games

PS: CPU keeps the temperature of 100 degrees, that's what I found on the Intel page!

Tags: Toshiba

Similar Questions

  • Satellite A200 - 1 MB-high temperature

    * Hi, *.

    I have Toshiba Satellite A200 and I have never cleaned the dust out of the computer case.

    CPU temperature sometimes goes very high, even at 85 C. But it usually ranges from 50 to 65 C.

    Is - this temperature is too high?

    What are the risks to the computer if I bring it to a laptop service for dust cleaning and change of thermal compound from the CPU?

    * I thank piece.*

    And, sorry, my English is terrible.

    Post edited by: CUPIC

    > What are the risks to the computer if I bring it to a laptop service for dust cleaning and change of thermal compound from the CPU?
    There is no risk. Laptop will be disassembled, cleaned and checked. After that the ventilation openings are clean and portable equipment will be properly cooled. You should do this.
    Call the service, ask for prices and to do.

  • Satellite A200 - stop the CPU cooling fan

    Hello

    I got a Satellite A200-1CK and stop my CPU cooling fan. Not that my CPU is not getting enough cooling. But when I use my laptop to school for use for OS virtualization, it heats up, and the cooler will not turn.

    The CPU cooler is broken or is it just a setting in the bios?

    Greetz,
    Dion

    Hello

    You must understand that nobody does you any kind of diagnostic accuracy and if you want to have the correct answer, your laptop must be checked by a technician.

    Please check the BIOS settings, but on my A200 I can t see anything that can help.

  • Satellite A200 - loses the battery, switch off the power

    I have a relatively old Satellite A200, yet almost all inside is new except the battery. The battery has a very short life, but that's because its old. Recently the computer started to suddenly lose the battery, so the charge light stays on, the battery light turns off and the battery icon said "plugged in, not charging." However, the computer still work on battery power. If I see it at the time, then by removing and replacing the charger repeatedly, I can start it load again, but if I am not it switches off without warning. Since the battery life is now less than a minute which often.

    I don't think that the problem is with the charger because it always shows the charger is plugged in, and when the computer is off the battery light is always on when it is plugged. I had a problem with the power connector, but if the motherboard was recently replaced so I don't think that's it either.

    If someone could help it would save me a lot of frustration, thank you.

    Hello

    At first, I must say that you should not be frustrated. Problems with consumer products are normal, and each of us has problems with laptops, televisions or other electronic product.

    Let's see what you can do about it.
    Your description is OK, but what I want to know is follow:
    When you remove the battery can work on your laptop with no problems (start work, cut)?

    I also think that the battery is too old and I presume it's troublemaker in the history. It is not easy to explain what behavior flashing if you have a defective hardware or old coin inside.

    Maybe, you need to buy the replacement of the battery and check the features for laptop and the battery, just to see if everything will be OK again. If you will be faced with the same problem again then we can discuss what may be the problem.
    In my opinion only a reason for this could be electronic power supply.

    What do you think?

  • Satellite A200-1DN - the update of the BIOS for Windows 7

    I am running 32-bit Windows 7 on a Satellite A200 1DN. I had battery problems (plugged in, does not support) and I understand that I have to update my BIOS. However I can't find an update of the BIOS for Windows 7, only Vista and XP.

    Can anyone help? I should update with the BIOS in Vista? Are there other options to fix this battery? I already tried an ATX reset and uninstall method battery Microsoft ACPI compatible controls.

    Any advice would be much appreciated.

    Thank you
    Ian

    Theoretically, you can install Windows Vista to update Bios and return Win 7, then. Before you do, try this:

    Unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off
    Remove the battery. Using a soft cloth, wipe the battery packs connectors and AC adapters.
    Reinsert the battery and plug it into the power adapter

    > I tried an ATX reset and uninstall method battery Microsoft ACPI compatible controls.

    also, have you had the same problem before installing Win 7?

  • Satellite a200-1GH: the file 'setupdiu.exe' is not marked for installation

    I have Toshiba Satellite a200-1GH and Windows XP Professional SP2 Rus

    I have download the latest battery Bluetooth toshiba downloads.

    Installation process has not finished, there is a mistake.

    How can I solve this problem?

    Remove the old BT battery, clean the registry with a 3rd party tool i.e CCLeaner and then try to run the BT facility.

    Good luck

  • Satellite A200-1GH - question of temperature

    Hello

    I have Toshiba Satellite A200-1GH, Im runing on Windows 7 and what the problem is the temperature.

    The idlle is bethween Celzius 50 - 55 and in full charge, it goes to 75-76!
    Is this too much?

    I measure with CoreTemp!

    Procesor is T2450 @ 2.0 GHz.

    Hi mate

    Don t worry!
    The temperature is not too high.
    It is a common temperature value.

    You need to know if the laptop internal temperature would be too high, then laptop would be automatically stops to prevent the equipment from damage
    If the laptop runs without a problem, then all is ok with the internal temperature.

    See you soon

  • Re: Satellite 2430 402: the processor upgrade possible?

    Hello world

    I have a Satellite 2430 402 with P4 2.53 GHz.
    Is it possible to change the processor of a more recent/fast (up to 3.4 GHz)?

    Thanks in advance

    Hello

    Maybe an other old Intel P4 CPU would work, but you will not be able to upgrade and use newer processors.
    Furthermore a stronger CPU would create more heat dissipation and this would lead to a temperature more high which could affect the functionality of the laptop.

    So even if a new CPU would be recognized correctly by the BIOS, it might affect the functionality of the laptop.

    Welcome them

  • Satellite A500 - upgrade the processor and RAM void my warranty?

    I have a Toshiba Satellite A500, and I think to upgrade my processor CPU and RAM. If I open it invalidate or do I need a Toshiba authority to open it? Removes the card RAM will void the warranty?

    All I need to know is that can I put RAM and CPU processor without voiding the warranty

    Hey,.

    If you upgrade the CPU, you will cancel the warranty because this upgrade is not supported from Toshiba.
    In addition, I put t understand why you buy a laptop, and then you think of some hardware upgrades. In your case, I'd rather bought a laptop with faster processor and more RAM.

    See also this article from Toshiba:
    [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://APS2.Toshiba-tro.de/KB0/TSB9401AX0001R01.htm]

    Finally and above all a RAM upgrade is not a problem. So check your user manual how to do this.

  • Satellite 1800-712 - the processor can be improved?

    Hello

    I have a 1800-712 and want to upgrade the processor.

    Is this possible?
    The vehicle currently has Intel Celeron 1.1 GHZ.
    If it can be upgraded, until then I go there then?

    I was not able to find in any threat on this model.

    Thank you
    Inge

    Hello Inge

    Upgrading the CPU is not possible. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation. The only thing you can do is memory expansion. On this path of unity will be vigorously. ;-)

    If you need information about the compatible memory module, please write again.

    Good bye

  • Satellite A200 (PSAE6E) - the performance of the network driver Windows 7 64 bit

    Hi all

    First of all, I wanted to make sure that the A200 is capable of running with windows 7 64 bit. It seems to me, if we can find the right drivers, it can be done.

    If anyone has the same A200 running with Windows 7 64 bit. Please do not hasitate to tell us what drivers you use, and where we can find them!

    I tried and tried, some drivers, but one more matter, driver LAN well it works, you can get internet and Yes YOA can address another pc on your network, BUT not the speed aspect cause you get about 200 to 800 KB/s with file transfer (copy a dvd takes forever). Who can tell me where to find the TOSHIBA 64 Bit drivers that will work without problem. Of course, I know some 64 bit Vista drivers (not all) work with Windows 7 64 bit!
    I use rather pure 64-bit Windows drivers especially the chipset drivers and Lan drivers as these are the most important.

    I discovered:
    Bluetooth works (exclamation mark in device just after freshly installed Windows 7 Manager)
    Infrared driver works
    Touchpad will work (but should be mentioned to install the touchpad drivers synaptics and Alyps)
    His work (by default, Windows 7)
    Driver Broadcom decoder (required = for the exclamation mark in the Device Manager, does not know that one), I don't know if it works in 64-bit!
    TI Flashmedia (for SD card reader) will work, but I don't specifically know what driver it was.
    LAN, well there are pilots, but Don't work correctly (speed issues, even with Windows 7 32 bit) someone at - it suggestions?

    I probbably have forgotten something, but change all the info as soon as everything works as it should on Windows 64.

    English is not my mother tongue so my choice of words and their spelling ;-) can be totally wrong! Be gentle with this Dutch ;-)

    friend Niels

    Hope that this subject led to info A200 can therefore be fully functional with every oft Windows 7 anyone having trouble with him!

    Hello

    Therefore, it seems that you have problems with the LAN driver... So have you ever tried the 64 bit Vista driver? And Yes, I read your ad and especially to get your opinion on the drivers from Vista to Windows 7 but that s not an explanation. That s only your personal feeling but I guess you never tried right? ;)
    So try it and post your result.

    An alternative, you can visit the Realtek page. There you can download the latest LAN driver you should be working.

    Check this box!

  • Satellite A200 PSAE6E: The controller Code 28 in device after installing Win7 Manager

    I have the same problem! I have an A200 PSAE6E with Windows 7. My Device Manager shows me a perfect compatible SDA Standard SD Host Controller under SD host adapters. But it has one certain Mass Storage Controller, under the heading other peripheral, and that there is a driver installed (code 28). I try to update, but he can't find anything.

    Here on the Web from Toshiba website I can't find the drivers for the card reader either. I think it is card reader controller (there is a Flash memory card Support utility, but I'm almost certain that it is the other)
    There is a driver of controller of card reader for Windows Vista 64, but my Windows 7 is 32. Do you think I should try it anyway? Do you think that maybe Toshiba didn't even release a driver for that?

    > Here on the Web from Toshiba website I can't find the drivers for the card reader either. I think it is card reader controller (there is a Flash memory card Support utility, but I'm almost certain that it is the other)

    If you click on details which is on the right side of the page of the driver, then you can find all the details on the drivers.
    The Support of Flash memory card utility is not driver but utility (the name says it all) and this utility controls the FN keys.

    Visit the European driver of Toshiba page and choose your model of laptop.
    Then try the 32-bit Vista driver called Flash Media Driver (don't mix it with Flash Utility Card Support). The Flash Media Driver v 2.0.0.6 is your bridge Media slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  • Satellite A200 - after the mouse USB Vista updates no longer works

    After installing the latest updates Vista (KB938371), I discovered that my mouse USB (Genius Traveler) does not work. I can't restore the system (mistake) and this update cannot be removed. Other (flash disk) USB devices work correctly.

    Could someone help me? Thank you.

    Problem solved, I found this on another forum

    + Hi all, +.

    + I found the solution on another forum (forget which) and published this solution in multiple threads. The problem is, as indicated, a Human Interface Device in combination with update KB938371. After installing it, my usb mouse stopped working. Just go to the--> HID Device Manager - devices--> unknown device and looking for drivers. Vista won't find any drivers online, so you must get the drivers on your computer. The location of the driver (in most cases) will be C:/Windows/Winsxs. You will get a window saying: "this is an unsigned driver blah blah blah". Just install the driver. The mouse worked for me (even without reboot). +

    + OS: Edition Vista Home Premium 64-bit. +

    Dr. +

  • Satellite A200 - 14 d high speed USB warning

    Hi, guys :)

    For a few months, I have this warning message...
    I looked in a lot of forums, but found answers very very different each time :( Hope you can help me.

    I usually only 1 USB mouse connected to my laptop (with Windows XP Pro SP3).
    The mouse is some Logitech thingie high-speed - nothing special.
    So my WinXP gives me regularly (3-4 and several times a day), a warning about HI-SPEED USB device attached to non-HI-SPEED Hub.
    There is a list in the window of warning with 8 ports.

    -> Intel (R) 82801G (ICH7 Family) USB2 Enchanced Host Controller - 27CC
    --->(8 ports) USB root hub
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port

    There is a recommendation below that says:
    Unplug the device USB Composite from its current port and then connect it to one of the ports on a hub are bolded.

    I looked in the Device Manager Windows in Universal Serial Bus controllers- section.
    Here is a list of what's inside:

    ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 27 8 Enchanced
    ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 9 27 Enchanced
    ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 27CA Enchanced
    ---> Intel (R) 82801G (ICH7 Family) USB Enchanced Host Controller - 27CB
    ---> Intel (R) 82801G (ICH7 Family) USB2 Enchanced Host Controller - 27CC
    ---> Composite USB device
    ---> USB hub root
    ---> USB hub root
    ---> USB hub root
    ---> USB hub root
    ---> USB hub root

    I have 4 USB ports (2 on each side of the laptop) and an integrated which is used by the WebCam integrated (think about the last concentrator Rood was the Cam, for when I turn it off, camera stops working and when I enable it again, Windows says, that it has detected a new hardware Chicony USB 2.0 Camera).

    What should I do?
    Let the fact that this warning for HI-SPEED USB is very very boring...
    There might be a hardware problem :( I noticed that controllers host Enchanced USB Intel (r) 82801G deactivation does nothing...
    Everything works as usual.
    For example if I disable the Third USB Hub of Rood, my USB mouse stops working (obviously for the USB port where my summer mouse attached to). But with Intel controllers - nothing.
    How can I use them? What drivers? If this is the case, where can I find new?
    Toshiba obviously do not support its laptops with Windows XP installed on them :(

    Thank you in advance!
    rbaleksandar

    I agree with Akuma. Try uninstalling the USB drivers and if you have installed the drivers for the mouse, remove them and try again.

    In addition, I would try to update the chipset drivers and BIOS. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In the worst case, you must reinstall the laptop with the Toshiba recovery disc.

    On the other hand, you have this problem with other USB devices? Maybe it s not a problem of the laptop.

  • How to share an internet connection broadband on the Satellite A200-1VG

    Hello
    I am very new in the world of laptops, 3 days old. In fact, I have a desktop computer (the OS is XP Professional) and just bought my self a Satellite A200-1VG (the OS is Vista).
    In my view, is it possible for 2 machines to share a connection high speed, but how I do not know. I must admit to be pretty ignorant when it comes to technology (you have probably gathered that now) and I ask that any given notice will be given in the language too technical.
    Thanks in advance for a novice.
    EGP

    Hello

    Of course, you can share the internet connection with 2 computers.
    If you have a WLan router, you can connect a computer to the LAN port and the laptop can be connected via Wireless LAN.

    You can also connect two computers to the LAN port. Some routers support two (or more) of LAN ports and assign TCP/IP addresses automatically.
    If your router supports one LAN port you could buy a Hub (or switch) for more LAN ports and connect multiple computers.

    Lastly but not least you can connect to the laptop of desktop PC, but the PC needs to be equipped with min 2 LAN cards.

    I would recommend a little goggling for more details. I m you will find some useful articles.

    Good bye

Maybe you are looking for

  • How can I delete the redirect "go to a Web site?

    Hello. I would like to know how to remove the redirection to the navigation bar when I open a new tab. everytime I open a new tab, that I put it so I come to my home page, google. But instead of heading to the search bar in the center of the site, as

  • dosent HP 50g calculator works properly

    Hello! I am a user of the calculator hp 50g graphic and I noticed that it is not working properly... What I mean is that it multiplies bacic matrices write the message 'invalid dimension', which tries to find the det (A) = 0 matrix 6 * 6 with the var

  • I can well picked up a carrier locked iPhone 5 that has been restored to factory settings?

    Hello I hope to trade in my old iPhone 5 (I currently use a 5s) either finance or credit of the store to an iPhone SE. However, the situation with my iPhone 5 is complicated. It was bought by my father's business (I used to work there). It is carrier

  • CD drive does not open

    I put a CD in the drive and it will not re - open.  Any suggestions?

  • DMP with printer

    Hello A customer who uses the DMP for display of Interactive application must have a printer attached to the application functionality. So find out if there are any specific command which must be sent of the DMP to the printer. How can I specify the