Satellite A200-1VP - new WiFi card does not work

Similar Questions

• Satellite P850-133 - extended graphics card does not work

  Hello!

  I got my 2 new p850-133 and they have reinstalled with a new copy of Windows 7, and then the extended graphics card does not work, he said: "code 10" failed to start, what to do, the hd4000 intel integrated works really well.

  Hello

  The laptop is equipped with a GPU NVIDIA® GeForce® GT630M.
  The European driver Toshiba page provides 3 different display drivers.

  2 drivers for nVidia GPU (v296.0 for the 3D and v296.01) and one for Intel (v 8.15.10.2712).
  You must install the Intel driver and one of the nVidia drivers.

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

  I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

  What can I do?

  Hi navarone_1,

  This means that the work of FN keys and you can t use the pad touch, right?

  Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

  You can find all the drivers and tools for your laptop on the Toshiba official European page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

  Last but not less than first installation package of added value and Flash then cards support utility.

• Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

  Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

  Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

  I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
  Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

  I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

  Help required, please.

  Hello

  Uninstall the existing touchpad driver and install it:

  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

  Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

• Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time

  After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).

  New value pack installation has not been successful.
  Moreover, after upgrading the drive to DVD from Toshiba is default, too.
  Who can help?

  I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.

  When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.

  As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.

  DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.

  As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.

  Bye and I hope that you report your experiences with the Vista upgrade again.

• wifi card does not work (asus laptop computer x53e)

  Hello

  I have laptop asus x53e sx1444v with Wi - Fi card inside. It was running Windows 7 Home Premium, but something was wrong with the system, so I reinstalled it completely. After you have installed all the drivers and updates from Asus, I discovered, that the wifi does not work. I tried all the drivers on the Asus Web sites, but nothing works. In Device Manager, it is listed as a network controller, but it is listed as unknown device. If I try to install the driver, it is listed as network card, as it is, but it has the error code 10 (this device cannot start).
  When I started to live linux, the wifi adapter works withnout any problems.
  The wireless card is intel 11230bnhmw (more info printscreened http://ctrlv.cz/mJMd here). I searched for the drivers but still nothing works listed as network controller.
  I tried to put the card and plug it into another of the HP laptop, it works in linux, but the same problem under windows.
  What should I do to make it work on Windows?
  Thank you.
  (Sorry for my bad English)

  I decided to change my OS, now I am running windows 8.1 and wifi card is working automatically, withnout need to install any driver.

• Satellite A200-14F - standby and hibernation does not work

  Hello
  I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

  I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

  If you have had the similar problem please write what I have to do.

  Concerning

  Hello

  > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
  After Installing Win XP, you must update the BIOS to the XP version.
  You should check the page European driver of Toshiba. There are BIOS for Win XP.

  After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

  Welcome them

• Re: Satellite A200-1Mes: XP audio driver does not work

  Hello
  I have a problem with my audio driver (I use windows XP). I installed all the drivers xp and still does not work.
  Can someone tell me where to find a driver?
  Thank you.

  I hope that you are using Windows XP SP2 home edition. Anyway check it please this thread. Try using the instruction given by Eldorado.

• Satellite 1905-S301: internal WiFi card does not

  I have a Satellite 1905-S301 laptop. I just bought a new Intel Pro/Wireless Mini PCI WiFi card because I discovered that my laptop is WiFi active (I have had it for two years and did not know this).
  I installed the card, attached to the antenna to it and installed the software. The computer recognises the card, but he won't find not all networks that are out there and it gives me the error that I need to turn on the hardware for the WiFi switch, even when it is turned on.

  Anyone have any ideas?
  DJ

  Hello

  On the right side of the laptop, you should find a WLan hardware switch.
  It must be on the use of the Wlan card.
  Also, try to use the FN + F8 key combination to activate the Wlan antenna.

• Satellite L300-17N (PSLBCE) - wireless card does not work

  Hello

  I recently bought a Toshiba Satellite L300 (PSLBCE) that came without any operating system and the dirvers. I installed WXP PRO SP2 above and downloaded all the drivers from the Toshiba site. Everything has been installed ok and functional except for the WLAN card. The wireless network card, it is a Realtek RTL8187B but it is not recognized by my laptop: if I Check Device Manager it does not appear (it does appear that "Network controller" with yellow mark). Then I went to Realtek website and download new drivers from there and installed again... also with these dirvers WLAN card still not recognized.

  No idea this coud be the problem? I don't know that I have downloaded the correct dirvers from Toshiba Web site as well as the Realtek site... but none of them helped. The chipset drivers have also been installed and also the last BIOS version (my BIOS version is newer than the one on the site of toshiba with the drivers for this model)
  May this be a conflict with the other dirvers or WXP PRO SP2?

  Thank you

  Hey Buddy

  Satellite L300-17N does not support Realtek RTL8187B but Intel 11 a/b/g (13ch) - Golan Wlan card.

  I recommend to visit the portal of Toshiba Europe WLan and recommend to download and install the driver Intel WLan from here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Here, you can try the Intel PRO/Wireless 3945/4965/5100/5300 driver package!

  I would appreciate your comments

• Satellite 2410-413: USB2 PCMCIA card does not work

  Hello. This is my first time on a forum, and my English is bad.
  I tried to install a card PCMCIA 4 port USB 2 (hw & sw) on my Satellite 2410 413 in order to use a dongle of DTV (hw & sw).

  This will not work: ports seem to be declared straight into the computer, but in fact, a simple key memory 64 MB USB-2 [a Sony "micro-vault" key), won't work, and neither will the Winfast DTV dongle.]

  Paradoxically, both the key mem will work on any of the three USB-1 ports, and the DV dongle will light on any port USB-1. The PCMCIA 4 port USB 2 card is new. I can't locate the source of the problem.

  Could someone help me with this issue?
  Thank you in advance for your answer. Here it is (maybe?)
  Another way of formulating the question: how USB ports are managed by the system?

  Hello Rasta

  Sorry, but I think that this issue should be the right one for producer PCMCIA. Try to visit the support page. You might find answers.
  Believe me on this path it is not easy to say why this happens. Toshiba is perhaps responsible for the functionality of PCMCIA card, but not used the card.

  Good luck!

• Satellite L50-B-281 - WiFi Driver does not work

  Hello world

  I have a problem that I can not find a solution

  I bought a L50-B-81, without BONES, because I have a free license of W7.

  I used the Driver download for Toshiba to look for the drivers.

  For my model (PSKTCE), I got two drivers for Broadcom and Aatheros one.

  The Broadcom Installer did nothing so I guess, I don't have hardware Broadcom.
  The only installed Atheros Bluetooth driver.

  Is there an easy way to determine what hardware is inside?

  Device Manager, where the works is not the devices are marked by this triangle warning sign, said he does not know the manufacturer.

  Thank you very much
  haegarhorrib

  I bought a L50-B-81, without BONES, because I have a free license of W7.

  The L50-B-81 Satellite is not known to me... I guess you get the model number... Could you double check your model number and share the good name with us?

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• Satellite A200-12 x starts but does not work

  Hello

  I had a satellite A200-12 x for almost a year with no problems at all until now.

  Since a few days ago, the computer starts up but when I get the password for my user it stops near work. The hard drive light stays on no - intermittently and made a little sound of cracking at regular intervals. It takes the computer more than 10 minutes to let the blue startup screen, then that more than a half hour to show my desktop. The hard drive light will occasionally be blink, which is when the computer appears to contribute normally, but only for a second or so. When I gert on the desktop, the light remains the same way and I can't work with it at all.

  It works ok in safe mode. I tried to restore the system, but it does nothing.

  Can someone help me?

  Thanks in advance

  What you mean to restore the system? Did you install OS using DVD recovery delivered or just roll back the OS to an earlier time using System Restore tool?