Satellite A200 - 23 k - view corruption during outdoor display is connected

Similar Questions

• Satellite A200-1QZ: No. HARD drive during the installation of XP

  HIII,

  I have a problem!
  I have my laptop (satellite A200-1QZ) buythis for everyday, it is with Windows Vista: (((I don't like it!

  I download driver xp for any material!
  I would like to install Win XP SP2 cd boot but it's error message, when I access the installation,< harddisk="" can't="" found="">>!

  I think that the mistake is on the SATA - HARDDISK? orrrr

  Please help me: p
  and happy new year...

  You must install the Intel Matrix Storage Manager first.

  This issue has been described many times here in the forum.

  I would really recommend to use the advanced search option forum, if you need details ;)

  Best regards and happy new year friend

• Re: Satellite A200-23N - I need the program that displays the status of the battery

  Can someone help me?

  I need the program that shows me the status of the battery of the laptop
  My laptop model is Satellite A200-23N.
  Please I need help!

  Hello

  What operating system do you use?
  Usually in the taskbar, it is symbol of power, and if the laptop is running on battery power power move the pointer of the mouse over this symbol and info on the battery power will be shown. You can see how can % of battery power has.

• Satellite A200 - after installing XP I don't have internet connection

  I installed XP on my satellite A200 and internet does not work. I changed BIOS, installed all the drivers available and I have a problem.

  Although it shows me the WiFi networks that are ready to go. When I try to access it is not. When I connect my ethernet cable from my router it says its connected well but there is no transfer or no internet connection.
  Everything seems to be ok, but I can't step on line...

  Can someone help me?
  Please...

  Hello!

  After installation of XP have also installed drivers? In particular the Ethernet and WLAN card driver driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you should check for yellow exclamation marks Device Manager.

  Also make sure your router has an internet connection. You can check in the router configuration.

  Last but not least to check the card WLAN and LAN TCP/IP settings. If your router is using DHCP, you must activate or try static ip addresses.

  Good bye

• Satellite A200-1 s 6 - problem during installation of battery Bluetooth

  Hi all

  I have problem with my bluetooth problem laptop A200-1 s 6 is this installation does not end.
  When I run the instalation program Toshiba bluetooth stack and start the instalation, instalation stop on this http://www.img-share.com/view/610 picture and does not continue... Please, where is problem?

  First remove the old BT of your laptop A200.
  Then download the latest version of the BT stack from the Toshiba BT Portal;
  http://APS2.toshiba-tro.de/Bluetooth/

  After new restart try reinstalling BT still

• Satellite A200 PSAE6E: no HARD drive during the installation of XP

  Hi Vandeven,

  I have the same laptop that you are, but I have difficulty to get Windows XP to recognize the hard drive.
  It keep saying there is no hard drive detected.

  I don't have a floppy drive either.

  Is there another way to install Windows XP without the SATA Driver?
  My bios is 2.10 and I can switch to a different bios it wont let me. Keep saying bad Bios!. But isn't.

  Please help as I am sick and I tried Windows Vista...
  Programs slow and inconsistent.

  Thank you much in advance.

  Why you n t use the forum advanced search option and search for similar topics?

  Installing driver SATA doesn't concern only the A200 series.
  On most new notebook Series SATA, driver installation is necessary.

  In any case if you want to use the search option, then you would find this Toshiba document:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Welcome them

• Satellite A200 (PSAE3) how to restart an interruption of the connection without rebooting

  Hello, I just bought my computer toshiba laptop.

  I use a FRITZ. BOX for my wireless network.
  Sometimes I lose the connection one can not reconnect with the programm "connectivity without config doctor."
  Also sometimes the Red (antenna) is.

  The only way is to restart.
  Are there other solutions without having to reboot?
  Can I configure the intensity of the signal?

  Orry

  Post edited by: orry

  Hello

  I think I know what might be useful for your problems of WLan boring;

  -Update the BIOS
  -WLan driver update.

  Yes, these two parts of the software must be updated to make sure that the WLan would work properly.

  One of my friends had the similar problem of WLan; He solved update driver WLan.

  After the update of the Wlan signal driver WiFi was much stronger as with the previous version of the Wlan driver.
  BIOS update help stop WLan sudden disconnects.

  See you soon

• Re: Satellite A200 - update of the X 3100 graphics display driver

  Hello

  When will be available the updated the X 3100 GM965 display driver version? The new version provides support for the OpenGL 2.0 + and SM 4.0. The display updated driver available in the Toshiba support area is old and many people would be interested to update display drivers for that bug fixes for various games.

  Best regards
  Sean

  I agree with you buddy, but the fact is that computer manufacturers will not refresh the drivers in the same way as the graphics card manufacturers.
  Graphics card manufacturers release updates always faster than other companies.

• ZBook 17 G3: Premature sleep during outdoor display connected

  Hello

  I'm using the default settings in the power and sleep settings. The laptop is plugged into a power outlet. It is plugged into the docking station of love at first sight with the mouse, the keyboard and the ethernet connected. The screen is supposed to turn off after 10 minutes and the computer is supposed to sleep after 30 minutes of inactivity. It I do not connect an external monitor, everthing works fine.

  If I connect a HP27sv monitor to an HP DisplayPort-to-DVI adapter and plug the docking station, and then I get the following behavior. After a reboot, everthing works fine until the first time that the computer sleeps: the display turns off after 10 minutes and wakes up in fine. After 30 minutes, the computer goes to sleep.  However, once the computer woke up from sleep mode, then it still comes down to sleep after two minutes. No matter what I do with the power settings and sleep, the computer goes into sleep mode after two minutes of inactivity.

  I can also reproduce the bug by using the sleep on the keyboard button:

  • Connect the external monitor
  • Press standby on the keyboard, the computer goes to sleep
  • Wake up computer and connect
  • Wait two minutes without activity, the computer goes to sleep again (should be 30 minutes of waiting)

  This system has the NVidia Quadro M1000M graphics card for the display docking station ports. Version of the NVidia driver is 354.86

  Hello

  There was a un communique release lately for the firmware of lightning, see support of your site and install it.

  Also, here is the link of all possible problems and solutions for love at first sight. http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.PDF

  Thank you...

• How to use an external monitor only - Satellite A200 - 1 m 8

  Hello

  I have Toshiba Satellite A200 - 1 m 8
  I have an external monitor connected to the laptop.

  D I would like to know if it is possible to disassemble the monitor to the laptop so that it becomes on my way so that I can easily see the external monitor.
  If so, please send me instructions on how to do it and if possible photos.

  Thank you.

  D I would like to know one thing too. Have you can be checked manuals s you have with your laptop?
  Boyfriend sorry but these issues are usually described in the manuals. Check if you can find something on FN + F5.

• Satellite A200 could not recognize the HARD drive during XP installation

  Hi all
  I need help with my laptop, please...

  My problem is,
  I have a notebook by Satellite A200, and the operating system is Vista, am not satisfied with Vista at all so I bought a Windows XP bootable CD... When I tried to install it it gave me a massage that he could not recognize my hard drive...

  I checked the Web from Toshiba site and downloaded the files from the storage for XP Manager as someone told me it could be the SATA problem and you must apply on your hard disk for XP will see it?

  The question is:
  How much is real?
  How can I install XP on my PC now?
  can I install Storage Manager while I'm on Vista and then install XP?
  I put the Storage Manager on a CD and boot from it?

  am really confused because when I extracted the Storage Manager and view the files I found the setup button and a few other folders, and I do not know what those to use because I don't know what is my hard drive... and any help will be much appreciated

  Thanking you a lot in advance

  Hi abu´s,

  Here´s a suggestion: Please use the search function in the forum because this subject has been discussed about 1000 times!

  Here´s a link to a thread were talking about installing XP on their machines with the need of the SATA drivers. Furthermore, it is important to doesn´t if you have a different machine, the procedure is always the same:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  Cheers and good luck

• Satellite A200-1QZ - view suddenly becames fuzzy and a little green

  Hello

  Excuse my bad English, but I have a problem with my 2 month old Satellite A200 - 1QZ Notebook.

  Sometimes, about 2 times a week, my screen get is fuzzy (there looks like the color depth would change to 16-bit or less) and I can see a small green tint (but here? not sure m) on the entire screen.
  I do not understand why, because sometimes during games, chat, write in word or something else, so no matter what I do.

  Currently AI? using m for laptops modified Desktop Driver Catalyst 08.2 (the driver is original, but I have a tool called 'Mobility DotNET4', I modified with.

  I don't think that the updated driver is the reason for my problem, because I remember of the day, I used the notebook for the first time and 1 hour later, I got it too. And now, the certified Toshiba display driver has been installed.

  I solve the problem with the restart of the system, but it is very uncomfortable during the games or chatting.

  I hope that my text is understandable...

  Help, I would be very grateful.

  Welcome MatthiasV

  Hello

  Eventually he s a graphics card problem, it is possible if the 3rd party graphics card driver has been installed.
  The graphic drivers from Toshiba support thermal protection which is needed to prevent overheating of the material!

  If you have used a non-Toshiba driver then a GPU could overheat and therefore this issue happened.

  However, for me, it looks like a hardware problem and therefore the laptop must be checked by a service provider authorized in your country!

  Good bye

• Satellite A200 - 1 CG PSAE3E: BIOS corrupted - solved with the crisis recovery disk

  Hi all

  I would like to report on the success of the recovery of corrupted bios on my Satellite A200 - 1 CG (PSAE3E).
  Like many others I downloaded a latest bios update for my laptop and it started under Windows 7 64-bit.

  In fact I only needs of some practical information from the bios update tool, but the update started automatically
  without a question. :( After several blocks has been updated the progress bar stuck a heterocycle.
  In 2 minutes, I got only the system completely frozen. I turned off the system manually, it works again, and...
  my laptop was completely dead: screen etc black and of course, I wasn't able to boot in Windows 7.

  So for those who only plans to update the bios: DO NOT update the BIOS ON the SATELLITE UNDER WINDOWS! THE UPDATE MAY BE STUCK!

  I searched on the web has found a solution. With a specially created disk and external usb floppy drive, the problem can be solved then

  I tried the recovery procedure described here, but it did not help. Earlier versions of tool phlash16.exe
  where it is not able to restore the bios. I heard that the disk was read constantly for about 2 minutes. After the recommended 5 min break, I changed the power of and then turned back on it and... I had the same darkness of the screen as before :(

  The strange thing is that the latest version of the tool phlash16.exe also did not work, but it was different from the earlier version. If I used the older version of the tool, the disk has been read for about 2 min, if used the latest version of the disk was read for about 10 seconds. It was for me, as the bios was not simply read by the tool.

  So I searched and searched again. Then I found it: it takes phlash.ini to the phlash16.exe!
  I downloaded an old bios (something from 2007) for an unknown Toshiba laptop to the Toshiba site. I renamed both the archive and found a phlash.ini inside. I changed only the second line in the ini file of... = 0 to... = 1 (I guess).

  Then I formatted the diskette under dos, copied the minidos.sys he phlash16.exe (latest version), a new bios for my laptop in BIOS. WPH (I guess) and after a phlash.ini has been fixed. After that, I started the crisis recovery makeboot.exe utility (found on the site, which I mentioned earlier). After that, I have the phone in recovery mode (Fn + B) bootet and... It worked like a charm. So, the important thing was the phlash.ini!

  So for those who has the same problem with corrupt bios, I've had: it's phlash.ini and the latest version of the tool phlash16.exe.
  All other information can be retrieved on the web site, which I mentioned earlier. The described method works with the phoenix bios!

  So good Look

  Kind regards
  Igor

  Thanks for the friend information
  But to be honest, the procedure of BIOS is always a sensitive issue and I would be always careful in using such things.

  When even good to know that your device is running again!

• Satellite A200-1TD - gel during the update of the BIOS

  I have a laptop model Satellite A200-1TD: PSAE0E, XP operating system

  I tried to update the BIOS and it did not work so he blocked. After that a few minutes, I tried to restart and it didn't worked so I unplugged the AC cable. After that, he did not answer. Black screen, no sign.

  Help, please

  Hello

  I think that, in this case, you can do nothing because the ROM module has to be reflashed and in the worst case the whole mainboard needs to be replaced.

  These freezes during the update of the BIOS can cause such problems as the laptop doesn't start over.

  Moreover, on the Web from Toshiba site you can find an authorized service provider:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an ASP.

  Welcome them

• Satellite A200 - 26J PSAE6E: No. HARD drive during the installation of XP

  Hay @ all. My name is ahmet.

  I'm from the Germany. I have a problem.

  I bought a toshiba laptop and I think it's a very good laptop.
  But I don't like Vista. It uses to much space, much grafic and a lot more.
  So I tried to install my old windows XP Professional sp2. Here's the problem:

  During installation, Xp procres say there is no hard drive.
  Hmm, I thought I should have a look on other forums. There, they said to integrate a sata driver on the xp cd.
  But I don't understand the using nLite to use.

  Could you show me how I had to reinstall my old XP?
  I have a lot of files to my laptop and I change some settings in Vista so that I could not use internet.
  If I want to reinstall vista with the recovery cd, it would remove all folders, photo ect.
  I use only my other old computer.

  I would be very happy if you could help me.
  Thank you very much!!! If you have an answer I would be too happy

  my system:

  Toshiba - Satellite A200-26J

  Modell Nr.
  PSAE6E-0F000HGR

  Technology

  Hello

  The nLite is a freeware program that helps you to integrate the SATA (Intel matrix Storage Manager) driver in the original XP operating system.

  If you want to know how to use nLite software, then glasses a bit.
  There are many websites that explain how to use nLite.

  (Driver SATA) Intel Storage Manager can be downloaded from the Toshiba driver page.

  Last month, I created a new XP CD using the nLite.
  I've included a few pilots, SP2 and some patches it of really not very difficult.

  As I said... Scope of protection is a key ;)

  Good bye