Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

Hey JP317!

If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

So check the site Web of Intel for an update and you should also find Windows 7 drivers.

If you have any other questions, please let us know!

Tags: Toshiba

Similar Questions

  • Satellite L300D - error code 19 Device Manager on the CD/DVD drive

    I have a model of Satellite L300D PSLC0E and you just install Windows 7 upgrade from Vista, everything goes well outside the HL-DT-ST DVDRAM GSA-T50N ATA DEVICE and ATI. With the HL - DT - ST DVDRAM GSA - T50N ATA DEVICE this a driver problem, it is said it seems to do with NTI Backup 4, tried to update for NTI Backup now 4.5 but still no luck.

    With ATI I run updates and reinstalled the program, system check, it shows that it is installed and everything works, but I don't seem to be able to change the display settings most important is 1200 x 800, I seem to think that with ATI there should be more, but not sure because when I start to run a set of changes in the size of the screen to 1024 x 768 , and I can't change anything. Any body any ideas?

    Grommitt60

    Hello

    (1) also tried to remove the capital letters and lowerfilters in the registry? In the forum, I noticed that this does not resolve this error code. On the Microsoft Knowledge Base, you can find a solution for this:
    http://support.Microsoft.com/kb/314060

    (2) I also have Satellite L300D and the maximum screen resolution is 1200 x 800. So you can set a higher screen resolution on internal monitor, this is possible on the external monitor.
    And normally, you can change the resolution of the screen in every game. Check this box!

  • Problem with DVD player and get the error code 19 Device Manager

    Original title: TSSTcorp CDDVDW SH - 224DB ATA device

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    How to fix it please Message Please please how to fix it

    Hi Emerald,

    Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

    To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

    This problem might have occurred because of these reasons:

    1. Install or uninstall the CD or DVD recording programs.
    2. Uninstall Microsoft Digital Image.

    Try the steps listed here and see if it helps:

    I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

    Your CD-ROM or DVD drive is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/314060/en-us

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • How to read the data in a device connected to the usb port

    Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

    I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

    Thank you

    Did you watch net.rim.device.api.system.USBPort?

    That's what the doc says:

    Provides access to the USB port of the device.

    Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

    Rab

  • Satellite Pro A120: Corrupt registry - error code 19 Device Manager

    I have a Satellite of A.120 Pro I am trying to charge my Creative Zen Sleek MP3 on it but keep getting a Code 19 registry is corrupted message in the Device Manager. How can I fix it

    Hello

    After a short investigation in the Microsoft Knowledge base, I found this description of the error Code 19:

    ---------------------------------

    Code 19:
    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.
    To resolve this problem, you can first try running a Troubleshooting Wizard.
    If this does not work, you must uninstall and reinstall the hardware device.

    This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Try these options:

    On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard. Click on uninstall and click Scan for hardware changes to load a usable driver. Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

    --------------------------------------------

    I hope this steps will help you!

  • Satellite A100-1AI watch CD player but Device Manager shows the DVD player

    I own a Satellite A100-1AI and went from Vista to Windows XP?

    My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

    Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

    Since the switch from Vista to XP I have not adjusted my BIOS settings

    How can I make my DVD see CD and erase those unknown devices

    Thanks in advance

    Spon

    Just a question;
    You can read and burn CDs?

    Regarding the unknown devices:
    These devices are only compatible Vista and so there is no drivers for the mass storage controller.

    Check this box:
    http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

    + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

    _Solution: _
    + This unit is probably the module of Robson former Turbo Memory. +
    + This hardware will only supported by Windows Vista. +
    + That is why there is no Windows XP drivers. +

    Greetigns

  • Satellite L505-112 - 31 error code in device USB modem Manager

    I have a USB stick modem: Huawei e172. I downloaded the latest drivers for Windows 7 64 bit. I have a Nokia n95 with firmaware update to version 30 and the latest drivers...

    Is causing me this problem in Windows 7:
    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    To start I have the problem with the huawei e172. After the update of the Nokia n95, I have the same problem with this phone.

    Excuse me for my English but I'm from the Italy.
    Technical support Microsoft tell me that the problem is on the Toshiba Windows 7. In fact, if I try the modem usb stick on another pc with Windows 7 64 bit it works fine.

    Hello

    It's really hard to say what causes this problem on your laptop. Do you use the same drivers on the other PC?

    Are you running the factory settings or you have installed your own version?

    In your case, I'll try to update the chipset drivers on and BIOS. The two you can find on the Toshiba site.

    Alternative you should contact the manufacture of your USB modem. Maybe they can tell you more

  • Animate the CC of the tests on the device via the USB port or the publication of device does not

    Without a paid with Apple Developer account (waiting to have in fact my first AIR for iOS app works correctly), I created the .mobileprovision and .p12 files successfully in Xcode. With these I figured out how to debug in the Debug of Animate version iOS Simulator > DebugMovie > iOS Simulator but I can't debug my device (iPhone) via the USB port. ("Impossible to install the application. Make sure that the selected devices are connected. ") Connected and on. No problem with the available memory.

    Past the other road, I published with success (he said) but my iPhone will not complete downloading the app in iTunes and even less using the 'post publishing' check in settings to install on my selected iOS device of publication. It is there no dialog, no explanation why... simply "the application was published successfully."

    I moved the .ipa file in iTunes and on my device. It says it is syncing but then goes with anything. I once accidentally dragging the icon of my iPad where it has at least tried to install it. The dimmed icon appears on this device with "install...". "below, but it was not built for the iPad, so I trashed it after a few hours.

    I have watched the video of Adobe and don't see what I'm doing is different.

    In Xcode, there is a window of devices. You can select your iPhone and check requests in this regard. Try dragging the IPA in this list. It may still fail, but I hope that Xcode will give a better error message.

    It is a faster way to much to get applications on devices using iTunes. If it does not copy OK you can then try remote debugging in Animate and then open the application. The IP address of your computer, you must have this ready to type in.

  • Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

    Original title:

    First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
    and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
    (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

    in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
    "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
    so I click it and and called up pop-up windows
    "the usb device not recognize."
    display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
    Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
    "Windows has stopped this device because it has reported problems. (Code 43) »
    Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

    Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

    Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

    • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
    • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
    • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
    • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
    • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
    • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

    Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

    Hello

    The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

    http://WWW8.HP.com/ca/en/support-drivers.html

  • Satellite A300D-20V (PSAHCE) - Double card in Device Manager

    Hello, I'm trying to understand this for a long time, but I failed. I decided to sign up here and ask.

    I have Windows 7 installed and fully upgraded, everything works like a charm, but in my device manager, I have two displayed graphics cards
    ATI Mobility Radeon HD 3400 Series (works well)
    ATI Radeon HD 3200 Graphics (boot error, code 10 device) - well Yes, looked at the list of error codes MS, tried to update the drivers, nothing works

    Screenshot of the Device Manager: http://img10.imageshack.us/img10/3290/radeon.png

    My question is what is this second device because it does not work properly, so the other question is if it is possible to combine the two devices to get more power in the graphics (like ATI CrossFire)? And if someone could post a link to the drivers who will be the best for this chart I would really appreciate it!

    Thanks in advance!
    Lukas

    Hey,.

    As far as I know on desktop it s normal behavior because the card will be installed as a primary and secondary card...
    But in Device Manager shouldn't t no yellow exclamation point.

    First you must make sure if more recent display of the official website of Toshiba driver is installed:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    If it doesn t work it would be interesting to know if you can see the same (yellow exclamation mark) on pre-installed OS from Toshiba.

  • Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed.

    Separated from this thread.

    Hello

    I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...

    Ewa

    Hi Ewa,

    Thanks for the reply.

    I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-11-notebook-Lenovo?c=1

    As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.

    Let us know the status.

  • Error in RE Device Manager. C6380

    HP Photosmart C6380 all-in-One

    Windows XP 32-bit SP3

    Have uninstall the software and re installed

    In the device under the Imaging Device Manager check the properties and get this message. Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Try this key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}

    Yet once, remember to make a backup!

    -SeanS

  • Satellite L300-170 - no network card in Device Manager

    Hello

    I use Toshiba Satellite L300-170.
    I install Windows 7 and realized that my LAN connection does not work.

    In Device Manager, I have only the wireless network adapter which works fine.
    My question is: is - nothing I can install LAN adapter manually and then install driver although my OS does not recognize LAN adapter?

    Hi mate

    First of all, please set the BIOS to default settings.
    Then save changes, connect the LAN cable to the LAN port and reboot the device.
    After that please check in Device Manager if the LAN Controller would appear once again.

    AFAIK some newer laptops supports a new energy saving feature.
    The LAN card is active and appears in Device Manager only if the LAN cable would be connected!

    Welcome them

  • PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

    PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

    Is this the same computer (Windows XP?) as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/windowslive/forum/messenger-signin/cant-sing-to-messneger/23775604-86f9-4bd0-8de8-cc39f10df40b

    ~~~~~~~~~~~~

    Related resources can include:

    MSN Solution Center
    (Registration required; Subscribers of MSN Premium only!)
    http://answers.MSN.com/

    How to contact MSN customer service
    http://support.Microsoft.com/kb/940784

  • 0 x 80240036 get this error code and don't do the update.

    0 x 80240036 get this error code and don't do the update. Message says "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. Ive tried for three days to do the update and I tried at home and at the office, but I get this message.

    I have updated to internet explorer 8, and then it worked.

Maybe you are looking for