Satellite A200 - adapter memory stick duo work?

Similar Questions

• Use of adapter Memory Stick Duo in Satellite A200 (PSAE6)

  I have a Satellite A200 (PSAE6).
  My camera have a Memory Stick Pro Duo and I have an adapter.

  But when I try to put the card into the memory, the same adapter card reader it go so deep that I can't remove it without assistance tools.

  So I don't know if my work drive card?

  What I've done wrong?

  Please help me

  Have you checked the manual for types of compatible card?

  Perhaps the Memory Stick is supported, but not the series Duo.

• Satellite Pro P100-327: memory card reader does not read the Memory Stick Duo

  I just received a P100-327
  aShop http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=121991&Toshib = true)
  According to this page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick®, Memory Stick Pro, MultiMedia Card, xD-Picture Card)", but the pdf manual that comes with it says that it supports not the Memory Stick Duo, Memory Stick Pro Duo or mini-SD.

  However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter, and the reader can't read one of them (they both count as Memory Stick Pro, which should be readable, right?)

  Would I be able to read my Memory Stick Pro cards? Why I can't because it says that I should be able to? Should I install something first?

  Hello

  To my knowledge and according to the manual of bridge housing media supports media type
  -SD memory card
  -MultiMediaCard, xD-Picture Card
  -Memory Stick
  -Memory Stick Pro

  Please note that the Memory Stick and Memory Stick Pro are not the same in the Memory stick Duo and Memory Stick Pro Duo.
  Don t mix.

• Qosmio F30 - 141 Memory Stick DUO / card reader problem

  I have a problem with the Memory Stick Duo Adapter/Memory stick PRO DUO card.
  Computer does not recognize volume. Unit Memory Stick appear in the system, but when I click on it in the Solution Explorer, computer say "insert the disk in drive E". I have the original card Memory Stick PRO DUO 2 gb and MS Duo adapter. 30 sec computer try plug this card.

  Computer properly operate with the Memory Stick Pro 1 GB card and Memory Stick M2 card 1 Gb with adapter M2.
  all this work cards in my Photo and on another computer.
  I am trying to connect this card to Sandisk 6 in 1 adapter PCMCIA, but in this case, no one card works.
  This device appear in IDE ATA/ATAPI controllers like '___Memory_Card_Adapter_II', but the driver for this device is not installed (KODe 28).

  Thanks for the wonderful world of the internet for this info:
  F30-141 does not support memory stick pro duo and adapters has not been tested.
  I'm afraid that also use adapters of doesn't help.

  I bought an external card reader. It s a small device and was very cheap and the best is that this external card reader takes in charge most of the maps ;)

• A Qosmio F10 read Memory Stick Duo Pro card does

  I have a memory stick duo pro 512 MB in an extension of memory card stick (case making it a full size memory stick)
  I can read the card on an external memory card adapter, but not as part of the internal drive?

  I think I have the latest drivers, but can be difficult to install in the right place, I can read the cards not pro using the same set up. How to read what the Pro cards on the internal card slot which driver should I I downloaded from the forum?

  Clues please!

  Hello

  I think that it of not possible to use the Memory Stick Duo Pro card in the internal drive.
  As far as I know, you can't use every SD card with the Toshiba unit.
  You should check the manual for this laptop. You will find information what SD cards are compatible and supported on this laptop.

  Good bye

• Multi-card reader don't like to give back the cards Memory Stick Duo Pro 23 Pavilion all-in-one

  I want to just make sure I don't do something wrong.

  When I plug it into a SD card seats when inserted about 2/3 of the way into the slot and I can easily put my fingers on it to remove it when it's time to take it out.  When I plug the Memory Stick Duo Pro that is not recognized until it is at least inserted 9/10 and I can push completely rinse with a case and am not sure that it has bottomed out or not.  It works fine, but now it is not removable without the use of pliers tweezers.

  Is this normal behavior and waited for the mult card reader integrated into 23 all-in-one Pavilion?

  I have a more than adequate solution.  I plugged in the little USB card reader that accepts MS Pro Duo in their own homes. This post is therefore more closely to ensure that I'm not missing something obvious.

  My guess is that the drive or the motherboard was designed for the case to be a little closer it is.

  Hello @MarksPavilion,

  I understand that you have problems, remove the Memory Stick Duo Pro card reader that he will not jump out far enough to catch. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• DSC - h3, and memory stick duo

  my daughter gave me his camera which was almost never used... so it is almost brand new, but it's obsolete. It is not a memory stick duo with her, and they are not available in the store. is the memory stick duo pro compatible? If this is not the case, I can use? No matter what?

  Yes, you can use a Memory Stick Pro Duo with capacity of up to 32 GB. More information on compatible Memory Sticks for the camera can be found in this link.

  If my post answered your question, please mark it as "accept as a Solution.

• Satellite P100: Memory Stick Duo Pro with MSD adapter is not recognized

  When I insert the CSDP in my Satellite P100-473-multi card reader - Vista preinstalled - (using an adapter MSD), the removable media is listed in the Solution Explorer, but the card cannot be read.
  With a 32 MB card, he pointed out that the card needs to be formatted first... but correct data are inside and must be visible.
  With 1 GB card, it reports that card is first inserted...

  Did anyone experienced this problem?

  Hello

  Have you checked the user manual you?
  Take a look at Chapter 8!
  There is information that the card reader is supported only SD; MMC; MS; Cards MS Pro and xD.

  As you can see that it supports the Memory Stick Pro, but not the Memory Stick Pro DUO!

• Re: Equim A200 - 151 Memory Stick Pro Duo 512 stuck

  Hello!

  I know very little about periphirals, and as a result, I now have a memory Sony stick stuck in my SD / XD laptop slot. I tried to remove it manually, but I don't want to disassemble the laptop in case I damage it. Any ideas on what I could do? Thank you!!!

  Hey there.
  I assume that you have not used the adapter, when you insert the memory stick pro duo in the card reader?
  Well, the only thing you could try is now use a pair of tweezers to get out of your laptop.

  But be careful not to push further, not the card in the reader.
  That's all I can tell you now.
  If you are not sure if you dare continue, go and contact local ASP to prevent further damage.

• Satellite A300-20n - memory stick pro duo question

  Help people!

  When I put the memory stick sony pro duo in 5 in 1 reader and try to upload photos, I get the message:
  The disk in drive F is not formatted. Want to format it now? Yes / No...

  Nothing happens if I press Yes or no... any body has any experience?

  Thanx

  Hello

  As far as I know the card reader supports Memory Stick Pro, but it does not support the MS Pro Duo cards.

  Please see the user manual.
  You will find an info what cards are supported.

  You can use the maps:
  SD, SDHC, MS, MS Pro, MMC and xD

• Satellite A200 - FN keys do not work

  I have the Satellite A200-1N2.
  I have fresh install Vista ultimate 32 bit because the last owner has lost the device driver and all disks in this laptop
  So, I download all the driver and utility from Toshiba website and install I install and cofigure toshiba Assist, but I can't use volume key with the Fn key, and on the other also.

  Please me tips

  Thanks before

  Hello, Mona

  It is not easy to say what the problem is here, but to have good working OS with all Toshiba tools and utilities, it is important to install all the stuff the order of good facilities. Visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads and choose your model of laptop PSAE3E and check the document Instructions of facilities.

  Simply install (available on the download page) all listed stuff in order exact facilities.
  After having done that, everything should work well.

  Just a question: what do you mean with volume with the Fn key? Do you hear the silent box with FN + ESC?

• Satellite A200 - FN keys do not work after upgrade to Windows 7

  I recently updated my A200 to Windows 7 32 bit. Since upgrading my FN key no longer works. I can't find the correct driver.

  Anyone having the same problems? Or anyone with a solution?

  TKS
  Praepositus

  Hello

  The fact is that not all the models Satellite A200 with Win 7 drivers released.
  Technical support VAP utility and flash card is important.

  Added value package was released for most Toshiba laptops
  Card Flash Utility is available only for a single series.
  For example, Sat L500 contains Flash Cards Support utility download and install it!

  He that will not help so I doubt that you will get the FN button work

• ATI HD 2600 with GDDR3 in Satellite A200 series memory?

  In Russia (on www.price.ru for example), there are a few offers of Toshiba Satellite A200-J10, - J13, - S16 with HD 2600 256 MB GDDR3.
  But I can find no official data on the subject.
  Is this true, or maybe just missprint by sellers? (very many of them, if that is the case, would be some kind of conspiracy :))

  I think it s more some conspiracy since the machine is not already on the market. I checked Google and asked a few geeks who know sometimes things earlier then that everyone and they told me that the VGA memory must be GDDR2 @ 400 MHz.

  This GDDR3 rumors are just some kind of joke, I guess...

  Welcome them

• Satellite A200 - Touchpad scroll function stop working after BIOS update

  Hello

  After that I updated the BIOS (drawn from the Toshiba site), the scroll function stop working. I can still click, move the mouse pointer, but can no longer navigate the touchpad. Relocation of Synaptics driver is not the problem. The strange thing is that the computer detects only my touchpad as standard pointing device (port: PS/2) device. "Graph of pressure" and "Moodpad" function also stop working and complain "this program requires a Synaptics TouchPad, and the Synaptics Pointing device driver.
  My computer is Satellite A200 PSAE0C-TR605C.

  Anyone know the reason?
  Thank you

  Danny

  Hello

  What operating system is installled and which is more interesting: what version of BIOS you have installed? Why I ask? Because there are 2 different BIOS versions, one for Vista (1.80) and one for XP (5.20) which means that when you Flash a BIOS XP on a computer with Vista installed then some functions do not work properly as the FN keys or the touchpad.

  If please check this out and make sure you have the appropriate BIOS installed.

  Welcome them