Satellite A200 - black screen when restarting

Similar Questions

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• Satellite A200 - black screen of death

  Hi all

  I have a Satellite A200 PSAFCA-01K00J model. This model, I bought Harvey Norman in Australia, but I can't find any registration on the web site of current Toshiba or abandoned. This sux because I am looking for any bios updates available to address a recent black screen problem.

  The first time this has happened that I was able to reboot after removing the battery/cut the current to several times before its good. The next day, after an attempted works to install Kaspersky Anti-virus update the same problem... Power disconnected, removed, deleted drums (replacing the cylinder one and then the other to check the faulty ram memory cards) of ram and hard drive and then bled off residual tension with start button. Through this process several times before finally successful. I had to pass by it a few times since after restarts automatic windows updates, etc. I extracted the procedure to manually reset the bios by jumping it, but it's something I want to avoid doing this until I've exhausted all other options.

  Toshiba Satellite A200
  Model - PSAFCA-01K00J
  O/s - Vista
  Hard Drive - 160GB with 50 GB of free space remaining.
  System 32 with proccesors core duo. (intel)
  Bios Version/Date-phoenix Technology Ltd 5.20, 25/10/2007
  SMBIOS Version - 2.4

  Any idea of sourcing on the last correct bios or any other input gratefully appreciate it... :)

  > Black Screen Of Death
  What happen exactly when you start your laptop?

  By the way: I ve checked the download from Toshiba on http://www.mytoshiba.com.au/support/download page and can not find this old model of laptop. I don't understand that Toshiba to THE is some archives for old models like on the page of European support.

  Anyway, I don't think that BIOS is the reason for this behavior.

• Satellite A200 - black screen with two beeps

  Date: October 17, 2009

  I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

  When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

  Thank you

  Hi mate,

  Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

  Have you already tried to connect an external monitor? You can see a picture on this subject?
  I don't know but maybe what he s m only internal something wrong with the monitor.

  In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

  Welcome them

• Satellite L655 - black screen when power on

  My Satellite L655 became black last night... now when I go to turn it on, it goes through the movements but only a black screen after booting in safe mode.

  Any suggestions?

  Stand by. Why safe mode?
  What happen exactly when you press the power button / stop?
  See Toshiba welcome screen? If Yes, what will happen after that?

  Try please enter the BIOS, the default settings and try again?

• Satellite A500 - black screen when I start

  Hi all

  I was using my computer yesterday and it started to freeze all of a sudden, I held the power button and turn off. Today, I don't then restart.

  I have two options:
  1 repair Windows
  2 start Windows normally

  If I choose option 1, it loads the Windows files and then gets to a black screen with nothing on it where I can move the mouse. If I choose option 2, it is "loading Windows" screen and stays there.

  The black screen occurs if I try to boot into Safe Mode, repair windows, or start from another version of Windows 7 that I have on CD.

  Please help me on what to do. I have important data that I've not saved so I have reset to factory as a last resort only.

  How can I access my data? Should I remove the hard drive and put it in another computer?

  Any help is appreciated.

  Hello

  > Should I remove the hard drive and put it in another computer?
  If you have important data on your computer, you should do this to make a backup of these files. I would recommend so buy an external HARD drive enclosure where you can put in the HARD drive to backup all the files on another computer.
  But I think that I will never understand why some people don't have a backup. I think it s the most important thing and always make from time to time.

  In any case, it seems your Windows installation is confusing upward and, therefore, it of needed to restore the Toshiba Recovery disk factory settings, but the it will delete everything on the HARD drive.

• Satellite A200 - black screen after sleep/hibernation

  Hello

  I just bought my computer about 1 week ago. CA? s a laptop A200 series and every time I tried to suspend/hibernate, it is not resume back or wake up. The power light is still on. The fan is always on. Even the pad NumLock responds.

  The screen is black and does not. I can only restart the computer every time that happens. I tried searching on the web for this problem and I found other people with the same problem.

  Only, I bought my laptop for a week, cana? t believe what is happening.

  Please provide me with a solution.

  Published by: ADMIN

  Hello mrtpol

  Maybe this thread can help
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=35390

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.

• Satellite A200-14F: BSOD when using the FN keys

  Hey all and its not so mind my English.

  OK, I have problem with my laptop its Satellite A200-14F and when I press the FN button for toshiba flash cards, he appears just BLUE screen and it stops my computer!

  ANY HELP IS WELCOME. !!!
  Thanks in advance.
  P.S. I have instaled the new aded value pack and cards flash driver (thast at the start of all the problems)

  Great!

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• HP pavilion 22xi backlit monitor goes black screen when using

  I have

  led screen have a HP Pavilion 22xi.  It is a year and no warranty left.  He started to go to a black screen when you use it.  I have to unplug the monitor for the display.  the power light lights up but won't stop him.  I saw a few ppl having the same problem, without success to get this resolved.  I tried external monitor on another laptop and have the same problem.  I replaced the AC adapt power and also downloaded the drivers for the monitor.  It's very frustrating.  I tried to reset to factory setting, and nothing changes.  It works for a while, then all of a sudden go to black screen and I have to unplug it from the back.  Please help...

  Hello @squiggy,

  I understand that your LED HP Pavilion 22xi screen just shuts off and will not turn off. After reading your post, it seems that the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• PAVILION 15: BLACK SCREEN WHEN OPENING THE LID ON WAKE UP

  THE LAP TOP SHOWS A BLACK SCREEN WHEN OPENING THE LID.

  THE SCREEN WORKS WELL WHEN PUT ON, BUT ON CLOSING THE LID FOR A WHILE AND RE OPENING STARTING THE ENGINE AND THE LIGHTS FLASH BUT THE SCREEN IS BLACK.

  TO RETRIEVE THE SCREEN POWER BUTTON MUST BE PUSHED AND WHEN FLASHING JUST AGAIN PUSHED THE SCREEN THEN WAKES UP.

  THIS FIRST STARTED WINDOWS 10 CHARGE BUT WHE I GO BACK TO THE FACTORY SETTINGS AND WHICH IS 8.1

  I TRIED TO REMOVE THE BATTERY TO RESET AND REMOVE AND REPLACE MEMORY CARDS AS SUGGESTED BY SOME SITES I RELOADED ALSO BIOS AND I STILL HAVE THE PROBLEM.

  I WOULD BE VERY GREATFUL FOR ANY HELP.

  Hi @lily-springer,.

  Thank you for your update.

  I am pleased that now when you close the lid, it does nothing.

  You don't have the possibility to contact the HP support for assistance. They can access your system remotely to help overcome the difficulties.

  Contact HP to Contact HP Support assistance

  Good luck!

• got black screen when changing the screen background images

  got black screen when changing the screen background images

  can any one help

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]