Satellite A200 - blue screen and reboots the system
Hello!
I have TOSHIBA Satellite A200-1IZ 8 months
Since yesterday, when I close the FN at the bottom is blue screen and the system is restarted.
How can I solve this?
are you sure its done the FN key? It may be a RAM issue
Tags: Toshiba
Similar Questions
-
Portege Z30-A-1E1 - blue screen and reboot
Hello
I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.
I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
In the event log windows that I can't find anything that clearly led to a cause.I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.
Anyone had a problem like this?
Any suggestions for debugging?Thank you very much!
Hello
I don't have a complete solution, but perhaps a step on the way.
I would say first to disable the auto restart when a blue screen appears.
This way the error message will remain on the screen until the PC is turned off.Know how prevents automatic restarts here:
http://www.troubleshootwindows.com/w...-8-7-Vista-XP/Tom BR
-
Satellite L40 - blue screen after reboot
I have a Satellite L40.
When I close Windows vista and reboot the laptop I get a blue screen. There must be a problem with one or more drivers. How can I find the driver that created the problem?
With sincere friendships.
Jetbag> How can I find the driver that created the problem?
who knows what (s) but try to uninstall a driver for graphics card
-
Blue screen on startup, the system restore / repair did not work?
Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.
I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.
Will be saved my files / is there a way to fix this? Thank you!
Hello
You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer--------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
death ' crashes and displays information about all accidents of a table.
Free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.
Hello
I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.
I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.
I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
What I do, he turns to blue screen with the same information.
Tried to reinstall from the CD of restoration without success.Help would be massively appreciated.
SaadHello
> Tried to reinstall from the recovery without success CD.
In this case, it seems hardware problem.
BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.But this could be one of the possible malfunctions
-
Satellite A200 - white screen and gel
Hi Experts,
I have this machine for 2 years. It was no problem. Last month, he began to display a white screen, and at the same time, it has been frozen after 3-4 hours running. Push the power button to restart, it fozen soon. I replaced a new fan and cleaned the dust inside. But the problem is still there. Someone has ideas what is the problem?
Thanks in advance.
Hello
The issue appears only after a long period of use is good?
Eventually the higher temperature affects the graphics chip.
The question would appear again until the graphics chip to cool
This is my theory
What do you think about this?It could also be a RAM problem anything is possible and that is why each part must be verified
In your case, I recommend you to contact a technician for laptop. The guys could check the parts. I mean it of better to check the hardware, then replace only the defective part rather than buy parts and hoped that the replacement would solve the problem.But listen buddy; If the graphics card chip is really affected then replace the motherboard and this could be a costly affair!
-
I have a laptop.
Processor: Intel Dual Core
Installed memory: 2,0 Ghz
System type: 64-bit operating system
Hard drive: 250 Ghz
I took a restoration/repair of window vista disc and restored the system to the manufactor defalt. I lost a bit of data, but I solved the problem.
-
Hello
Since yesterday my laptop shows a few Windows blue screens with the following values:
(no value or empty)
PAGE_FAULT_IN_NONPAGED_AREA
PFN_LIST_CORRUPT.Some auto repairs were performed by start-Help/Systemstartreparation.
After restarting the system in securitymodus and anti-virus disabled
the following checks were made:(a) chkdsk c:
The file system have been checked and no problem not found.(b) sfc/scannow
Windows-Resourceprotection found no integrity issues.The system works only in time and
After a few minutes, the laptop will be very hot and the fan works very hard
the judgment of the work system,
the mouse stop working,
There is no activity on the disk system c
the system shows reactions
Finally appears with PFN_LIST_CORRUPT blue screen.Could you please help?
Thank you.What did you do with your machine? do you have additional software installed or upgraded something?
-
Satellite M100-150 gets 'blue screen' and resets the bios data
This problem started months ago.
Laptop shows sometimes 'blue screen' for unknown reason and constantly does if there's some modern running game graphics.
After that I always see that the settings bios reset to default valuesWhat should I do?
Okay, it looks like some kind of a problem. Could be a hardware problem, but that's just a guess about your situation.
First, you must perform an update of the BIOS on your computer to make sure that the rom BIOS is OK.
Then, if the problem persists, I would contact an authorized service partner, since the problem seems more related material.
If this is the case, visit the following link to find the nearest ASP in your country. Send your machine there for a checkup of material:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Greetings
-
Black screen and resetting the system
My Macbook Pro goes to a black screen with the launch of the color wheel, which requires a reboot of strength with the power button. Restart the system fixed compensation to my home folder and preferences reset all icons by default and demanding connect me with my apple as if ID from for the first time.
This is the second time that this has happened, reset initial was thought to be caused by a recent bug in Adobe Creative cloud files deleted, but apparently it was fix so my problem can come from somewhere else
any help appreciated
With the fix Adobe deleted folder in the root is not restored. For the question remains the same even if the bug is kidnapped by Adobe. It is not restored because Adobe doesn't know what has/is in this folder.
Following what you can do: show the files hidden value and in the Finder, go to the root (select the startup disk), look at the first record, until there was a file (name beginning with a.) which is cleared by the Adobe CC update, now enter TimeMachine, go to the date before you did the update say 25 - th of February 2016, you will see the deleted file (the first file), restore it.
Then restart.
When you are unable to restore this folder, start while now the keys CMD + R, select 'Install OS': who will install OSX and let your only user data. I'm not sure that this will restore this lost file, because I don't know what it was.
-
blue screen and restarting the round due to the update of windows
Windows Update-
Configuring updates step 3 of 3... 0%
* Blue *.
* restart *.
Configuring updates step 3 of 3... 0%
* Blue *.
* restart *.stuck in a death spiral
safe mode, says I need to enter the command ' rstrui.exe / OFFLINE:C:Windows.
to get to the system restore.
I do it, so he said there is no restore point when I KNOW there is.
I need your help D:
* cries *.I don't even tell it to do updates , but it still it still... I just put it to sleep, then I find it panic!
Hi Lily T,.
I suggest that you provide a blue error screen make sure to disable the auto restart for windows update
http://support.Microsoft.com/kb/555444
For more information, please follow the link below?
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358 -
Satellite A200 - blue screen error when you try to open HWSetup
Hello
I get a Windows blue screen error everytime I try to open HWSetup or access from Toshiba Flash card using the Fn key.
Any ideas how to solve this problem?
See you soon!
Hello!
Using Windows Vista?
If so, you should try to update the Toshiba value added package and hardware configuration. The two you can find on the Toshiba site:http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Good bye
-
PE8 crashes, blue screened and trashed the project!
Sigh... someone create DVDs using recent PE8 and HD video in a DSLR? I tried this weekend, and it's really ugly.
1. whenever I try to open the grave PE8 Panel transitions down. End of session without any resumption of work being edited. And it gets worse.
2. I did my video without transitions, then went apart to create a DVD. Blue screen of death. IPF in nonpaged area or such nonsense. I repeated 3 times this, thinking that it must be timing something. And it's even worse.
3. I decided not to do a DVD, just a video online. PE8 now reports my project cannot be opened. It is damaged. All those hours of wasted editing.
It's bad enough. Is anyone using the elements of Prime Minister to edit video from a HD camera? If someone is doinf this, I would like to know how to work around what appears to be the killer of bugs in PE8.
I use a Nikon D7000. I did a lot of video using PE4, 6, & 8, using still images and video standard digital and especially it work OK. This experience is so bad that I wonder if I need to switch to products from Apple to HD video.
This is Ole Pa new reporting PROMBLEM RESOLVED. How? I just bought the upgrade to Premiere Elements version 10. and the same project without modification to the project or my computer now makes the DVD instead of taking down my PC with the Blue Screen of Death. Adobe never helped me with this problem or suggested that this might be a bug in their program.
It is difficult for me to undersatnd why Adobe don't let not their paying customers help them find bugs in their products. This seems to be an example where "crowdsourcing" could help them get the best products without a large part of the costs for them. Adobe users, help other users of Adobe is a wonderful thing (and thanks to Adobe for providing a service that allows us to do), but as this folder, users of Adobe cannot fix bugs in the Adobe code. Only Adobe can do and if listen to use we could help them to do so.
I am very happy that version 10 has fixed the bug that interrupted my months project; and I hope that someone in Adobe will look at these forums of supervisory and allowing users to help Adobe to find and solve problems.
-Thank you, Ole Pa
-
At present 2 sites not open. When I am trying to open these sites to be ' problem loading page or the Web site you are looking for does not appear. These two messages are displayed.
Try to clear your browser's cache.
Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.
-
How to disable the Satellite A200-Ah7 screen while using the external monitor
Is it possible to turn off the monitor on the laptop Toshiba A200-Ah7 while I use a second monitor?
It's embarrassing to have the laptop monitor on at the same time.
Thank you.
GaryHmm, I think that's not possible, but have you tried to press FN + F5 several times?
Is it only a CRT monitor available?
The monitor CRT, external display and if only that is available, then you could try to choose this.Otherwise, you can close the lid if you do not use the internal monitor
Maybe you are looking for
-
Satellite L30-115 returns after hibernation too early
Satellite L30-115.The lid switch opens even slight movements (with the lid closed). What makes my book out of hibernation. Energy saver, I put to enter the Hibernate when I press the power button and do nothing when I close the lid. So I expect to do
-
install on mac mini end of 2014 SSDS
I want to install an ssd on my new ram of 4 GB of mac mini end of 2014 500 GB hd is not possible to upgrade the ram 8 GB is ssd and solution to speed up but I would like to know if this is possible without losing the garancy I bought it in November 2
-
OfficeJet 4215xi all-in-one: scanner
My officejet 4215xi all-in-one decided to stop scanning correctly. I feed my original in the automatic document feeder (as I did for years), it is no longer pulls the documents in the leading pace the digitized the image being spread or with about 2
-
How to lock programs pinned to desktop
How to lock programs pinned to the start menu? I arranged programs pinned in a specific order, so I could find them easily. Lately, whenever I start the computer, all the icons are aligned along the left side of the screen in a different order.
-
V5 - 552P keyboard some keys not working not
running windows 8.1. less than a month. the keys c, d, e, 3, 4 will not work. last week, it was those and a few more. any suggestions? Eric