Satellite A200 - cannot use Vista after the recovery of the product

Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

If I use F8 and then select Repair computer... This is what is happening with each option
-Restore the full windows operating system: after clicking on OK nothing happens.
-Diagnostics of memory: there is no problem with memory
-DOS prompt: I run CHKDSK and there is no problem with the hard drive
-Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

I even ignored the button restart! But still get a crash dump, when I try to do something.

Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

Hello

It's very interesting story. I got several notebooks several times but I never noticed anything like that.
I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

Tags: Toshiba

Similar Questions

  • Satellite A200 PSAE0E - no display after the update of the BIOS has not

    Hi all

    I have Toshiba A200 PSAE0E. I got the Vista OS to Xp.
    When I tried to upgrade the BIOS setting, the system frozed.

    I reformulated the system using the power button. There is no display on my screen when restarting.
    I tried to restart by pressing F1, F2, key to the House and even removed the battery for a while, until what there is no display on my screen.

    I even tried connection and an external monitor, but that also there is no display.
    At the moment I don't have any sort of recovery disk.

    I would be very happy if someone could help me.

    Hello

    To me, it seems that the BIOS update procedure has failed.
    For no apparent reason has frozen the system and you have interrupted the update procedure.

    According to mu ROM module (where the BIOS is stored) has not been flashed properly and this is the reason why you cannot start the laptop.

    In this case, you need the help of ASP I know, this really stupid s situation but I'm afraid there is no alternative to m.

    I think that the technician will try to flash the ROM module using a special BIOS and then the cell phone should start properly if all goes well. I'll keep my fingers crossed for you.

    Good luck

  • Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

    I own a Satellite A200 laptop computer with Windows Vista.

    Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

    I reinstalled my OS using the recovery cd - and the exsists yet problem.
    (Version 1.30, Audio bios driver ver. 6.0.1.5374)

    Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

    Thanks (and sorry for my "rusty" English :-()

    Tomer

    Hi guys

    Can you please check this Microsoft article? Maybe this will help.

    http://support.Microsoft.com/kb/929685/en-us

    By the way: is your A200 with or without built-in webcam?

  • BSOD on Satellite A200 - 1 m 8 after the release of the standby or hibernation mode

    Hey...

    I have a laptop: Toshiba Satellite A200 - 1 m 8 OS: Win Xp Sp3

    After taking over my computer in standby or hibernation, I got the blue screen "appeal of dysfunction - parity error - hardware your... provider etc..." »

    I checked my GPU drivers updates and checked the memory RAM models, but all seem ok.
    I also put the count to run with the base of msconfig drivers but wtihout any positive results.

    Any idea what the problem might be?

    ....

    Hello

    As far as I know on the Satellite A200 BIOS should be updated to the version of the BIOS Win XP if Win XP has been installed on the machine.

    Update you the BIOS to the version of Win XP? If this is not the case, this->.

    I searched a bit on the pages of knowledge of MS for some details about this error and found this page:
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q222973 &

    Microsoft means that this error could be related to the failure of hardware.

    This could be fair and I think that in this case, you must contact the ASP in your country to verify the keyboard and the touchpad.
    Maybe the parts should be replaced.

    See you soon

  • Cannot use CS6 after the expiry of the CC of the trial

    H, I I work on a desktop with Windows 8.1. For a distance learning course, I got a one InDesign a Photshop Cloud version installed for 4 weeks on my desk. On this, I have a version of Adobe Creative Suite CS6. Now, after the expiry of the OBA of cloud I tried to work with my office versions. This ist is more possible, because I always get a note that my cloud-Abo has expired. It is not possible to remove the cloud of my desktio ist program. How can I use my version of office again?

    Cloud of reading also includes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

  • Cannot activate Vista, said the product key already in use

    My computer is having problems, so I re-installed Windows Vista on my computer. When I wrote the product key, which is on portable tmy, in the installation and it re-installed. A few days ago it Windows Activasion asks to activate Vista. When I write key protuct its says that its already in service. What im going to do?

    How to activate Windows Vista manually (activate by phone)
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    5) stay on the phone (do not select/press options) and wait for a person to help you with the activation.

    Also:
    How to activate Windows Vista by phone
    http://support.Microsoft.com/kb/940315
    http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Product Activation Solution Center
    http://support.Microsoft.com/contactus/cu_sc_prodact_master

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Satellite M30: Cannot use COM with the Modem port

    Hello

    I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

    Any help would be greatly appreciated.

    This problem when you use the Toshiba Recovery CD?
    Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

    Additional please check several comments here in the forum area Modem. I found several threads with similar issues

  • Cannot use CS6 after the expiry of the subscription of the CC

    CS6 got on my computer for more than 4 years, I bought at the time. I used a free CC subscription through my University for the past year. Now that it has expired, I can't open my CS6 programs more. When I click the InDesign icon, for example, it tries to open, open CC icon then they disappear. I was chatting in line for more than an hour and got no where, except that my serial key is active and available for use. Should I uninstall and reinstall CS6 again?

    Run the cleanup tool

    The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  • Cannot use CS6 after the expiry of the CC membership

    Mac ios 10.10.5

    My CC membership comes to an end, and that's fine with me that I can not afford to continue to pay for it. However, I can access is no longer the collection master CS6, I already own. I uninstalled the creative cloud and CS6 using both uninstall and the cloud creative cleaner, downloaded the master Collection from Adobe CS6 and re-installed the software. Always impossible to open Photoshop or other adobe software without re-subscribe to the creative cloud.

    Is it possible that I can continue to use without the CC CS6?

    Cloud supports https://forums.adobe.com/thread/1584746 and https://forums.adobe.com/thread/1584746

  • Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

    Hello...

    Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

    The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

    ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
    Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

    First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

    Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

    Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

    Windows tells me that it was impossible to find a driver in the any of the archives...

    The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

    Any help would be greatly appreciated,
    Tasos

    P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

    P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

    This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

    Hello

    Regarding the sound issue.
    A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    You will need to install KB888111 and KB835221 hotfix

    With regard to the BIOS;
    Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

    Good bye

  • Windows Update crashed my computer, sending me into the 'frustration after the reboot loop.' I use Vista, by the way. (Even worse!)

    Hi MS. victims (be strong!)

    I have the same problem about the update of windows. What happened was that I had put just internet access at home, so I was invited later to "new windows updates available" so I agreed. After about an hour (because he was that much) it was done and was ready to be restarted. so I restart my computer without hesitation because I had already created a restore point. The Blue Screen of Death. so he started to happen... the "loop." no Safe Mode. no last good configuration that worked. No command prompt. none worked. I mean, it's just bad.

    Victims of the SP, please help. I use vista, by the way. even worse!

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite A200 cannot find the storage driver

    I have a laptop satellite A200 and everytime I restart the computer, it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

    We can I find it?

    > it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

    Go to the page of the Toshiba driver and download, storage manager,.

    http://EU.computers.Toshiba-Europe.c...ivers_bios.jsp

  • Satellite A200 (PSAE6E) - Impossible to recognize the WLAN driver

    Hello

    I have a Satellite A200 PSAE6E with Vista.
    I want to just install WXp and erase Vista.

    When installing Xp, everything is Ok, except that my computer does not recognize my wireless card...
    Still, after the boot sequence, windows desktop appeared and a message: new hardware found...
    When I decide to do an automatic search and install... nothing.
    When I look in the control panel > Device Manager
    In the "Other devices" section appears: with a yellow network controller!
    And can't find a good driver...
    In properties, detail sheet, it is written:
    PCI\VEN_8086 & DEV_4229 & SUBSYS_00008086 & REV_57\...

    I have download all the drivers from toshiba (for XP) Download Center and I also try to download Intel drivers... NOTHING...

    Please if someone can help me...
    François

    You have installed Windows XP SP2 home edition?

  • Dead by Satellite A200 - 1 c 3 after involuntary Bios Update

    Dead by Satellite A200 - 1 c 3 after involuntary Bios Update!
    Help, please!

    Hello

    It's a shame, but it seems that you need a help of a Toshiba ASP. technicians
    In the best of cases, only the ROM module must be flashed once more in the worst case that the motherboard could be damaged. :(

  • Satellite A200-1N1 - how to enable the AGP?

    Help me, please! My English is very bad.

    My laptop: Toshiba Satellite A200-1N1, OS: Vista
    My problem: when I open the program, message: "* WARNING * + the game can not be consistent because AGP is disabled." "Please enable AGP for consistency.
    My question: How can I enable AGP?

    I look forward to your reply... Thank you.

    I never heard about to activate the AGP. Normally the standard AGP's ex-s desktop PC.

    In your case I would update the display drivers and DirectX version. The drivers, you can find the Toshiba site:
    http://EU.computers.Toshiba-Europe.com

Maybe you are looking for