Satellite A200 doesn't stop when the power is connected

The Satellite A200 just stops, if the power cable is unplugged before you stop. If the laptop off and immediately restarts (max 5 seconds between stop and restart).

Anyone has the same strange problem?

Hi Thomas

You should definitely contact the ASP in your country. It is maybe something wrong with the electronic power supply on the motherboard of s specifications.

As said John replacement must be done for free because the A200 is a new series and of the guarantee must be valid.

Good luck

Tags: Toshiba

Similar Questions

  • Satellite A200 (PSAF4A-009009) stops when the key.

    Laptop has first of all the problems that have been resolved with a good rash of a compressor from overheating.
    Worked fine for about a month, has had at least 4 different OS on it without any problem [experiment] is now OS he came out with Vista 32 bit Business OEMAcct.
    If at any time a key [key] or button volume control [on the front] is touched/press the laptop stops instantly.

    If no button is pressed at any time, it works very well [using the onscreen keyboard], it does on battery or AC, I tried different power supplies [Toshiba origin] and Aftermarket. Said the keyboard can be are detached, disconnected and reconnected without change. It matters little whether or not the battery is. It does not matter where or when, since its running, even pressing F2 for bios it. Have you tried the ram in various locations.

    Laptop will refuse also turn on unless I have press one key [key] and press the power button. Any other suggestions please?

    Thanks in advance,
    Darrin.

    null

    Hi SF_Gizmo,

    with your "compressor" action you have blown the dust in your machine...
    each connector is dirty now...
    I think the dust makes a bad connection - this may cause the problem described...

    one chance is to disassemble the whole machine, clean all the components and back...

    If you're lucky, it will work then...

  • Satellite Pro L500 - stops when the power cord removed

    Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

    Someone please help. I have not installed anything new.

    Hey,.

    For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

    I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Satellite L655 - questions turn on when the power adapter is unplugged

    Hello

    I have a problem with my new Satellite L655. When the power adapter is disconnected and wireless is disabled, the laptop can turn on for less than a second turn it off again. OR turn 'power' and 'Wireless' turns on, but black screen and hd light; After startup bios of 30-40 seconds, the wireless light turns off and hd lights; OR turn on normally;

    Toshiba has changed the motherboard a few days ago, but the problem persists. Update BIOS. My laptop is the only one affected

    Thank you in advance,
    Maurizio.

    Hey Buddy,

    > Toshiba has changed the motherboard a few days ago, but the problem persists
    So have you contacted already technicians again? You must tell them that the problem is still not resolved and it must be another reason for this problem. Then get in touch with technicians again to clarify this issue.

    Have you connected external devices while laptop is turned off?
    -Online if yes remove each of them.

    Load default settings in the BIOS?
    -Online if it is not this. Enter in the BIOS, and then press the F9 key to load defaults.

    Otherwise, it would be time to service as I have already written. It must be a nuisance material

  • Satellite A300 stops when the power adapter cable

    Hi people

    When I connect the power cable for my toshiba satellite a300, it stops immediately. I can use it on battery normally without any problems.
    When I boot in safe mode, it works fine without any problems with the AC adapter plugged into the laptop.
    Operating system is Windows Vista
    What is the reason? What can I do to fix this?

    Thank you

    Can you use it for laptop with AC power only when the battery is removed?
    If so, boot up your laptop and when the operating system is loaded to put battery inside, wait a few minutes and disconnect the power supply.
    Plug it in again and let us know if the same thing will happen again.

  • Satellite L750 - green color video when the power is turned off

    I bought the Toshiba Satellite L750 and when I cut the power... I have problems with video card
    I see all the videos green why?

    Sorry for my English because I of the Italy

    Test several times. If this will happen again and again, I recommend you bring the laptop and ask for replacement.

    Something like that shouldn't happen.

  • Satellite Pro U400 freezes sometimes when the power cord is plugged

    Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

    I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

    Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

    It tends to occur more frequently when the low battery alarm has rung;
    (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
    (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
    (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
    (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
    (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
    (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

    Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

    Hello

    First of all, I never heard a driver from the motherboard.
    There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

    Look, man. laptop should work fine even the AC adapter is connected or not connected
    If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
    You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

    First of all the memory modules and AC adapter must be verified.
    If the problem persists even using new modules and AC adapter, motherboard may be affected.

  • Re: Satellite L650 - 108 WLan stops when the lid is close

    Hey, so everything is in the title :) people

    I got this wireless card; RTL8191SE. Everything is big, internet go etc...
    But when I close the lid, is stop internet:(en se qui n'est pas grande quand je veux télécharger quelque chose d'assez grande)

    How can I fix it?

    I got the latest driver, I think that: 21/05/2010... 2016.2.521.2010

    THX

    Hello

    You should take a look in the power of Win 7.
    There should be an option to close the lid.
    Put the cover for doing nothing.

    Maybe this will help.

  • Satellite A200-23: noise Anoyed when the speakers are not set to mute - Win7 64 bit

    When I leave the table of sound mixing (_without mute audio on microphone_) there is a noise very disturbing speakers.

    Windows 7-64 bit, that's what I installed in a Toshiba satellite A200 23W and I don't have any other problem except micro that it does not work on SKYPE.

    Sound alone, works very well, as soon as I hear anything * when I muted microphone *!

    Is this all I can do?

    It is not easy to give you an answer. I don't have that kind of problems on my Satellite phone and Skype works perfectly (audio/video).
    Have you tried to play a bit with the sound and the Skype settings?

    You hear the sound in Skype only or how to understand this?
    When you use the headset is this annoying noise still there?

  • Laptop stops when the power cord is not plugged in but the battery is charged to 100%.

    just happened this morning.  accidentally deleted the decision-making of the laptop.  and the judgment of the laptop.  weird because this has happened before and no problem.

    However, this phone wouldn't turn.  until I have plug AC laptop would be the power of the laptop on.  I checked the battery is the meter displays 100% charged.  in windows, it is 100% loaded.  but as soon as I unplug the laptop, the computer shuts down.

    I have windows 7 and my computer is HP dv6t Quad Ed.  any help would be much appreicated.

    Plug the power adapter. Connect to Windows and open the HP Support Assistant perform the battery test. Post your results here.

    If you have the most recent UEFI (v 5.1 or higher) environment installed-> press-> power button press the ESC key to call the menu of boot - select F2 the System Diagnostics-> PC HP Diagnostics UEFI material-> select components-> battery Test tests.

    Post your results here in your thread.

    Best regards

    ERICO

  • Satellite Pro A120 cannot start when the printer is connected

    Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

    I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

    However, if you turn the printer off and turn the laptop it starts up fine!

    Its really the printer which is the cause as its only when I turned it on.

    It's never caused this problem with my old PC using Windows XP too.

    Any help with a resolution would be greatly appreicated.

    Thank you

    Adam.

    How to disconnect the printer during the boot process? ;)

  • Reference Dell 2400 will start when the power cord connected to the mains, or after restoring power. Is the result of a setting on the computer?

    The computer is turned off.  If the electricity is off, the computer will automatically start once power is restored.

    I guess it's a desktop pc that is a few years old and yes some early atx power supplies will do it, creepy when there was an interruption of the power supply when you are out and go home to find the pc on.

  • Satellite A300 stops when the power adapter is connected

    Hello!

    Yesterday, I bought a new Satellite A300. I plugged it in, worked some time with her and then I decided to stop it while it was plugged.
    The computer has stopped working, but in a few seconds, he started alone.

    I tried to do it while it was disconnected and there is no problem, but when it is plugged the problem persists.
    I would be happy if someone can help me!

    Thank you very much!

    I would try a BIOS update. You can download it here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Satellite P300D 10V will stop when the game

    Hello everyone

    I bought a satellite P300d 10v last month. At the beginning it was very good, but it was still very hot.
    I thougt that the cause is the weather, but it wasn't.

    When I try to play a game (cod4-prostreet - same easy dos games) my camera turns off in the first 10 minutes! and he always did that to any game all resolation.

    And another problem too; If I turn on music to aircraft 50% was a "diiizzzz" sound from all points of the keyboard and the connection of the plastic parts.
    First of all, I couldn't have thought them too big problems but when I search online in Turkey, I found a lot of people who have same problems on their P300D 10V
    and some of them gave their pc in the technical service and take their money back so I gave my too.
    But of course, I have problems to tell my problems of technical service right now.

    Is there anyone experiencing the same problems with this pc or the knowledge to solve problems?

    Erman Manas
    BURSA/TURKEY

    You have COOLING method in energy savings of Toshiba to the maximum level?

    While playing do not forget the laptop is placed correctly on the desktop and make sure that nothing obstructs the cooling rack.

  • Computer stops when the power to the computer to sleep, on computer virus problem

    Hello

    When I put my pc sleep and wake him up, a window pops up saying that the machine has stopped unexpectedly, and then the pc automatically reboots by itself,.

    after reboot, a window box comes in saying that the pc rebooted one... and that Windows will inform me what to do.  What happened yesterday and today.

    I must say however that Friday evening, August 24, my pc was slow work, since a few days I noticed, but Friday it was slower, I could see that something

    moving in often via the little blue wheel icon that shows that something is happening.

    I "had" McAfee Total Protection in my machine since 08/05/2012 and last night I clicked on the McAfee to do a full Scan of my pc, because I thought there was something fishy in it.  McAfee Full Scan clicked, a blue page with white letters arrived, quick and deep that I saw Dump numbers going up to 100, then the blue screen came out and restarted my PC.  After reboot a small box of Windows came to say that the machine had stop unexpectedly, he

    has run a control bar, when in fact something like 'your stop machine unexpectedly and windows will inform you what to do', something like that.  I then

    new click the McAfee icon, click the full sweep, the same thing happens again anywhere.

    Then, I went to the website of McAfee and talkative with Technical Support, he came into my pc to see for himself, he opened the Navigation button and had IP

    address to which McAfee was 'downtime '.  He told me I had a virus in my computer... He gave me a phone # to call for assistance in the removal of the virus. I called, the man

    did not come into my PC to see, he said, I had to pay $89. something taken him. I closed with him, went with the customer, aksed for my refund...

    sad situation, but I withdrew my PC with McAfee.

    I've downloaded Malwarebytes, checked my PC had 2 Trojan horses, you click on Remove to remove the.  Still had Malwarebytes in pc, I went to Trend Micro, which I had before in my pc for years and renewed my Sub. with them and has installed. After doing a full Scan, no virus.

    I made a 'machine checking if' work properly AM early this morning.

    This afternoon, August 25. I opened my pc, the audit began, time + after pc restarted normally, then all of a sudden the blue window came with white letters, dump numbers went up to 100 then pc rebooted, Windows little box came "... unexpected" and normal ran pc after.  Worked a bit on the pc then place to sleep so I could go somewhere, when I clicked on the mouse to wake up, as I always do in the pc, it awakened, blue page with while that the lettering came, took place on the same things as above.  PC ran good, had to go eat, put the pc to sleep, came back same thing occurred again

    I searched what happens and found nothing.  I went to the community, there nothing either.  So I'm here today to help hoping that you know what is happening.

    Thank you for your time and your help.

    Bebb

    Hello

    Currently, you have a program full-time antivirus installed on the computer?

    If you do not have one, I suggest you to install Microsoft Security Essentials.  Follow this link to download.
    http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

    Follow these methods.

    Method 1: Run a Scanner online from Microsoft.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     

    Method 2: To remove the virus manually, see the article:

    How to remove a computer virus?
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    Important: The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

Maybe you are looking for