Satellite A200 - eblib.dll is not designed to run on windows

Similar Questions

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• Age of Empires 3 does not start on a vista machine, get this error "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error."

  I'm trying to play age of Empires 3 on my computer running windows vista Home premium and the program does not start. I get the error message: "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error." I tried many suggestions from Microsoft (resettlement program, reinstall in safe mode, update & reinstall the drivers for my video card, the compatibility issues with vista, updating and reinstalling directx 9.0 c, install vista service packs 1 & 2) but nothing has worked so far. I was able to play the game on the same computer with windows xp installed (it's a different hard drive that is not in the computer, and everything is the same) and it worked fine. My computer is old enough, but like I said the game worked before installing vista. ASUS A7N8x deluxe, AMD Athlon xp 3200 +, ATI radeon 9600, 2 GB OCZ ram that all suggestions are welcome. Thank you.

  Hi Raygun55,

  Welcome to Microsoft Vista answers Forum!

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  I suggest that you copy the file manually by following the steps and check if you are able to play the game without any problems:

  Manually copy the file

  To do this on a computer that is running Windows Vista, follow these steps:

  1 insert the disc 1 CD for one of the following games into the player from the computer:

  o Age of Empires III

  o Fable: The Lost Chapters

  o Zoo Tycoon 2

  o Rise of Nations: Rise of Legends

  2. click on start to reduce this includes this image and then click Documents.

  3. Locate, and then click computer.

  4. search and then click on the CD drive.

  5. Locate and then click the following folder:

  CD player :\ DirectX9

  Note In this folder path, the CD player represents the drive letter of the CD drive.

  6 double-click on Apr2005_d3dx9_25_x86.cab, right click on d3dx9_25.dlland then click copy.

  In Rise of Nations: Rise of Legends, double click Aug2005_d3dx9_27_x64.cab right-click d3dx9_27.dlland then click copy.

  Note Use the Apr2005_d3dx9_25_x64.cab file for the x 64 version of the Windows operating system.

  7. find one or more of the following folders, depending on the games that are installed on the computer:

  By car : \Program Files\Microsoft: Age of Empires III

  By car : \Program Files\Microsoft Games\Fable - The Lost Chapters

  By car : \Program Files\Microsoft Games\Zoo Tycoon 2

  By car : \Program Files\Microsoft Games\Rise of legends

  Note In these folder paths, drive represents the letter of the drive where the game is installed.

  8. right click on the folder of the game which is the part that is installed on the computer, and then click Paste.

  Note If you have installed more than one game on the computer, repeat steps 5 and 6 for the other games.

  You can check the link for more information: error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL was not found": http://support.microsoft.com/kb/910813

  Alternatively, you can try to install the game in XP compatibility mode and check if you are able to play or not.

  Right-click on the game > click Properties > click on the Compatibility tab > select for XP compatibility mode > click OK.

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bad Image C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error

  Hey,.
  Everytime I open an application I get the following message
  C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error
  The program of all the work after clicking on ok
  This has happened since my last update automatic
  Im running a fairly new HP with vista home premium 64-bit
  This is not the first time that this happens and im HD crashed a few weeks ago.
  So basically, it is a clean installation, a few weeks ago.
  IM thinking it is a 64 bit to 32 bit problem accentuated by the updates but I ng3epa have no idea
  Help

  Hi, cdg59!

  It seems that your system is damaged.

  You might want to try the suggestions in this post: http://linenbach.com/tiki/tiki-view_blog_post.php?find=&blogId=1&offset=60&sort_mode=created_desc&postId=465 that talks about how to solve problems with wtsapi32.dllprecisely.

  Alternatively, you can look over The system in Vista Recovery Options (http://windowshelp.microsoft.com/Windows/en-US/Help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx), specifically Startup Repair (http://windowshelp.microsoft.com/Windows/en-US/Help/5c59f8c1-b0d1-4f1a-af55-74f3922f3f351033.mspx).

  Please, let us know if this solves your problem or you need assistance!

• C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.

  original title: C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for pension

  The battery died and when I restarted my computer I started having this error message last week whenever I start my computer. Explorer opens but doesn't load properly, not usable.  Service pack 2 is installed when the first available.
  C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support
  I tried MS fixit but nothing helped.  Need help.

  Chances are that you see the effects of ongoing hijackware infection!

  • My infected computer - what should I do now?
    https://forums.Malwarebytes.org/index.php?showtopic=9573
  • Help: I got hacked. Now what should I do?
    http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

• Windows error: "nvtt.dll is not designed to run on Windows or it contains an error...". "Failure of scan SFC and journal CBS

  I got an error in windows: "nvtt.dll is not designed to run on Windows or it contains an error...". "when I try and play the game Smite. I ran sfc/scannow and got an error which cannot be repaired but was published in the CBS.log newspaper

  Hit: https://account.hirezstudios.com/smitegame/
  Newspapers/screenshots: https://skydrive.live.com/redir?resid=E711236DB814F354! 131 & authkey =! ABaxYzYN4oRF14k
  Any help would be appreciated. Thank you.

  Hey Cameron,

  Thanks for posting the request in the Microsoft Community.

  After description of the question, I understand that you are facing problems by installing the game strike. Let me know if this isn't the issue.

  (1) is the issue limited only with this game?

  (2) have you made changes on the computer before this problem?

  Method 1: I suggest you run the Microsoft FIXIT from the link and if it helps.
  Diagnose and automatically fix problems with Windows games
  http://support.Microsoft.com/mats/games
   
  Method 2: I suggest you run the Microsoft FIXIT from the link and if it helps.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
   
  Method 3: If the problem persists, I suggest you to follow the steps from the link and check if the problem persists.
  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems
   
  Method 4: If the problem persists, I would contact the hit game support for assistance.
  https://account.hirezstudios.com/support/default.aspx
   
  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• C:\Windows\system32\wpd_ci.dll is not designed to run on windows

  When connecting my ipad or iphone 4s, I get the following error, and the device is not recognized in itunes.  I have uninstalled and reinstalled itunes and been on th phone to Apple with the chance of the o.  Any ideas?  Thank you

  C:\Windows\system32\wpd_ci.dll is not designed to run on Windows or it contains an error.

  Hello

  Your question is on iPad, iPhone, and iTunes; who are all the Apple products.

  Please try their focus groups.

  Here is a link to the iTunes from Apple community:

  https://discussions.Apple.com/community/iTunes

• «.. . DLL is not designed to run on windows... 'and/or'... .exe is not a valid win32 application... ' and/or 'bad image '.

  Programs will no longer work until I reboot (uh, it's rebooting) with one of the following error messages: "...". DLL is not designed to run on windows... 'and/or'... .exe is not a valid win32 application... ' and/or 'bad image '.

  Since I got a malware infection (CloudShield) I have had this problem since. At one point I was Windows Vista (could be minutes, hours or days - it varies) to get one or more of these messages for a variety of programs and the dll for things that worked perfectly well until there.  The most recent was to explore "Explorer.exe is not a windows 32 application '! Obviously, I couldn't have been using my computer and opening existing as an Excel document files and the Explorer window that is currently open if this were true!  Everything I run worked fine, until suddenly something I try to open opens more and gives me one of the errors above.  This does not happen when I run mode without failure.

  I managed to repair some of the damage generated by the CloudShield, including how it has disabled my task manager and other programs of the Control Panel, in what I could find on registry cleaning and removing the exe file that he had pointed to. There is clearly something wrong again. I run sfc/scannow and tried the other recommendations in "http://support.microsoft.com/kb/929833" who have found no problem.  I use Zonealarm and have run its auditor of the filesystem a couple of times (on the entire Program Files folder and the Temp files) and not found anything wrong either.

  I found similar problems in the media, but they always a specific .exe or .dll. I have not found that address this kind of

  Although I have not worked as in depth with Windows Vista, I used to install, configure and support business (including beta versions) on Windows NT and XP applications, so I'm not exactly a novice working with programs installed on Windows, I'm completely baffled by this.

  Anyone?

  If you have been infected by malware, the safest bet is to reinstall.

• Cabinet.dll is not designed to run on Windows or it contains an error

  I just got a message arrived to the top when I am logged in and do not understand!  Bed C:\Windows\system32\Cabinet.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  I also don't seem to be able to run a scan Mcafee!  Any help please.

  Original title: help please

  Hello

  Did you do any change on the computer before this problem?

  Try the following and see if it helps.

  
  Method 1:
  I suggest to start in safe mode with network and then try to run a full system scan and check if it helps.
  
  Step 1:
  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
   
  Step 2:
  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
  
  Method 2:
  How to solve the problem by running the clean boot in Windows Vista: http://support.microsoft.com/kb/929135                                                                                                                       
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.
  
  Method 3:
  To run a SFC scan, follow the steps described in the following Microsoft article.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833
  
   
  Note

  : Also make sure that you have disconnected all external devices except the keyboard and mouse.

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error.

  Original title : A major problem with Windows Defender... will not run :(

  When I go to run Windows Defender, I get this message: MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  Then, after clicking OK, you get another small window saying "Windows Defender User Interface has stopped working... Search for an online solution and close the program (which does nothing) or close the program.    WHY?  McAfee scan says there is nothing wrong with the computer... There is something wrong. Impossible to get websites to find, or they are very slow.

  I have VISTA Home Basic edition, Emachine, bought 32 year THAT VISTA was released this January.

  That is to say 9 - seems to work better than 8 (which took awhile to do)

  SP2 is installed and I believe that most, if not all the updates are installed.

  Oh, and no matter what flash supported won't run... little is a nice way of saying. My flash player update. It is mess up until I had to update. :(

  Try the suggestion of Azam K.  If this help not to do the following:

  https://community.McAfee.com/message/208529

  McAfee should have disabled Windows Defender.  If not, or if you did turn back on, you must turn it off.  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off   Windows Defender cannot be uninstalled from the Vista OS, but can be disabled to avoid conflict with other programs.

  You will probably need to uninstall Flash and reinstall it: http://www.adobe.com/support/flashplayer/

  I don't really like to make a negative comment on an anti-malware program, but McAfee has a reputation for sometimes bogged down operating systems.  If your problem persists, you will need to uninstall McAfee (to include using the McAfee removal tool) and see if that has any impact on your computer problems.  If there is an improvement, you may consider trying another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• Receive error message: "C.\windows\system 32\TAPI32.dll" is not designed to run on Windows at startup.

  original title: how to fix "C.\windows\system 32\TAPI32.dll".

  When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider."  What can I do to fix this?

  Hello

  You did changes to the computer before the show?

  Method 1: Follow these steps and check if that helps.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Error message at startup: C:\Users\Jerrold\AppData\Local\Google\update\1.3.21.65\goopdata. DLL is not designed to run on Windows or it contains an error

  Original title: google update

  on startup, I get C:\Users\Jerrold\AppData\Local\Google\update\1.3.21.65\goopdata. DLL is not designed to run on Windows or commercial error what should I do to correct this?  And what is the update anyway?

  Hi Jay,.

  1. When did you start to question?

  2. did you of recent changes on the system?

  This seems to be related to any of the Google program that is installed on the system.

  Since you are getting this error at startup, you can try to perform a clean boot and check for the issue.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• The bad image error. C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Whenever I try to install the material using a USB port, I get an error from the bad image. It is said:
  C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Any help will be useful.

  Thank you
  Jeff F.

  Hi Jfog18

   

  1. what material are you trying to install?

  2 have you installed for the device that you connect software?

  3. were you able to connect the hardware device much earlier?

  
  Method 1:

  You can analyze your computer using online for computer viruses antivirus scan. Rerailway to the link below to complete the virus scan online. Check if this help -
  http://OneCare.live.com/site/en-us/default.htm

   

  Method 2:

  You can perform a SFC scan and check if the problem is resolved.
  To Perform a Scan SFC -
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• C:\Windows\System32\D3D10Level9.dll is not designed to run on Windows or it contains an error when it tried to update to windows live messenger

  Original title: installing windows live messenger update revealed a .dll file bad, maybe direct3d related.

  I am running windows Vista professional, service pack 2. I just updated windows live essentials, specifically the Messenger and have since lost feature program.

  The launch of the program, I get an error message saying:

  "
  Msnmsgr.exe - bad Image

  C:\Windows\System32\D3D10Level9.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
  "

  subsequently I do not have much in graphical material in the e-mail program, insofar as a chat window is empty (but I can still type messages and send them, without being able to see, or no response). I don't see this problem in any other program, but perhaps no other programs try to use graphics in this way. In principle, I could downgrade windows live Messenger back to what it was, but that seems more to avoid the problem rather than solve them.

  I had a quick glance in the D3D10Level9.dll file, in the system32 folder: it has no size and is apparently empty. Conclude that this file is just broken and needs to be replaced?

  An internet search indicates that this file is described as "Direct3D 10 to Direct3D9 translation Runtime". I was wondering if it was a directx problem, so tried to reinstall that. It did not work.

  It seems to me that I need a replacement for this particular dll file that actually works, but I'm incredibly careful to find a replacement and the "tips" on how to mess with some arbitrary site system files.

  Could someone offer any advice on how I should proceed with this? What danger is there to find me a replacement dll file, change the privileges of the corrupted file, so I can replace it and make the switch? It would be the right thing to do? My analysis of the situation is correct? Could it be solved with a relocation of a program?

  Thank you very much

  Uninstalling and reinstalling the update of windows for a year that has put the file d3d10level9.dll on the computer, the problem has been resolved.