Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

Similar Questions

• Laptop goes down when using the internet - Satellite Pro L100

  Hi, I had my laptop (satellite pro L100) 5 days and I connect through a router to the internet, but in the last days when im using the internet, a Help window automatically opens and approximately 90 internet Explorer windows open, it became really frustrating, im using norton which came with it, everyone has ideas ive ran a scan for virus and adaware but came up with nothing

  Thank you

  Mark

  Hello

  I understand you very well. For me it s a shock if 90 IE Windows would appear on my small laptop screen. SHOUT OUT! : O

  However, have you installed any 3rd party applications that can open the windows?

  I think that this is not a normal state of the system and if it appears the days of view therefore, you should try roll back BONE to the beginning.

  In addition, you can try to check in the MSCONFIG what background process runs on the operating system. If there are some very strange processes you must turn it off and you must remove the Autorun.

• Windows Explorer Crash when using the control panel

  This is the type of an interesting question that happens to me only sporadically and usually only to a cold start.

  When I shut down the computer completely for cleaning or install something, when restarting, open the Control Panel causes Windows Explorer to crash (note that this is not Internet Explorer).
  
  It restarts immediately, but I lost some of the icons in the taskbar - especially the icon Sound Max.

  If I do a reboot it comes back and I can use the Control Panel normally. Tried to remove items from the start menu, as obviously something is in conflict when it starts but it is like shooting in the dark to find the good start. I even reinstalled W7 with a lot of attention, but it happens once again from time to time. I ran sfc/scannow several times and all is well.

  As long as I don't do a cold reboot it will work very well for weeks without a hitch. (Please no comments about just don't).

  Someone else has a similar problem? My specs are lower and it has not changed when I updated to the latest version of the bios so I suspect something on W7, and I strongly suspect the driver SoundMax which is in fact very old for W7X64.

  All updates are underway, including the latest which was supposed to increase stability for W7 X 64. I had added this update 4/28. An accident 29/4 good. I uninstalled the update and re-installed directly from the microsoft link. Sometimes it works, but not in this case.

  I studied all the information mentioned in the error codes and most of the time, it led to speculation of different people to different causes. I've read that it could be a conflict with the driver Sound Max, this is why I suspect as well that it might involve the Nvidia GPU driver. Changed the GPU driver and no joy. Whenever I have ask W7 to check a solution that is not found. So, it happens once in a while, but there is nothing wrong? At least Microsoft knows something is happening--evidence of the update.

  ASUS P6T Deluxe V2 LGA 1366-Bios 1003 - Intel I7 920 - EVGA GF GTX 260 SC - 12 Gig Corsair DDR3 1333 Ram - Gig 2 300, Velociraptor, Raid 0 1 Seagate 500 Gig HD - Lite on DVD Burner - floppy drive and external-180 card-Coolermaster V8 Avermedia HDTV card reader - Thermaltake Toughpower 850 w. modular fan P.S. - Antec 1200 case - Reobus 6 - 5 controller 120 fan Thermaltake Fans - 1,200 cases GPU Driver 196,21 Windows 7 X 64

  Hello

  Make sure that Windows Update is turned on and install the update KB980408 (http://support.microsoft.com/kb/980408) - April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available .

  Issues that this update fixes this update improves the stability and reliability of Windows 7 and Windows Server 2008 R2 in various scenarios. This update addresses the following issues:

  • Windows Explorer crashes and then restarts when you access a third-party Control Panel item.

  This update solves the problem?

  If this isn't the case, please download this reg from my SkyDrive file:
  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import.

  When Explorer crashes, Windows Error Reporting Service creates a dmp under C:\Localdumps . Please download the file to your public Skydrive folder and post the link here. I take to the dump, maybe I can see the cause.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite A200 - 19L: is it possible to use the additional HDD - 2 x HDD

  Hi, I would like to put the second HARD drive. Is it posible to do it in this model? I saw put to HDD2, how do I open the lid?

  Hello

  As you have already said it depends on the laptop model.
  The second location of the HARD drive should be placed at the bottom of the unit near the first location of HARD drive!
  You can consult the user manual! There should be a picture with all the details!

  For most of these covers are guaranteed only with one or two screws and if you want to remove this cover you have to remove these screws!

• Where is the DBMS output window when using the PL/SQL Editor in v1.5.5?

  I find the output window of DBMS when using the SQL worksheet, but where is when I run a PL/SQL procedure in the PL/SQL Editor window?
  
  I'm used to using TOAD (and want to use SQL Developer, because it's much better behaved when executing procedures, among other problems, TOAD refuses to reduce to a minimum when it executes a pl/sql procedure) and it allows me to edit a pl/sql procedure, enable the DBMS output window, run the proc, and have the DBMS lines show up in the said output window.
  
  I can't find the same functionality in SQL Developer. I've seen a lot of posts (this forum and a Google search), but they all talk about the SQL worksheet. This is not what I want.
  
  Any help would be greatly appreciated.
  
  Thank you.

  Hello
  After running PL/SQL procedure, I saw all the important information in the running tab (called Running - log) including DBMS_OUTPUT.put_line lines.
  Petr

• Satellite A200-1 s 5 - can I use a 3G card?

  Can I use a 3G controller PCI Express Mini card in this model?

  I think that this is not possible because for Satellite A200 there is no 3G card.
  The laptop does not support 3G cards.

• Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

  Hello

  I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

  Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

  When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

  I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

  Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
  Would this work?
  Anyone have any ideas?

  Here's an interesting article from Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
  Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check if the CD/DVD drive would work again!

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

  have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

  try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?

  45fmj

  Hello

  Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

  Kind regards.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• When you use the touch pad, the pointer would not move.

  Original title: arrow not laptop computer movingon

  When using the touchpad on my laptop the pointer would not move so I had to plug my mouse to use my laptop. Why the touchpad pointer stopworking?

  Hi Ron123,

  1 Windows operating system you are using?

  2. What is the brand and model of your laptop?

  3. This occurs when you use a particular application?

  4. When did you start to question?

  5. did you of recent changes to the computer?

  You can try to update the latest version of the Touchpad drivers from the manufacturer's website and check.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Screen shuddered up and down when on the Internet.

  Original title: monitor quivers up and down

  Watch the flutters up and down when on the internet.  no flicker in offline mode

  Hello
   
  1. what browser do you use?
  2. it happens when you visit a particular Web site, or on any websites?
  3 does the problem occur when you access the Explorer?
  4. you remember of any changes to your machine before the question?
  5. are you able to access other applications normally when connected to the Internet?
   
  I suggest you to Update the Chipset drivers and see if it works very well.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm