Satellite A200: Not able to write DVD using Win XP

Similar Questions

• Not able to write DVD after reformatting on Equium A60

  Help, please
  I had to reformat my drive hard once the system has been corrupted, now, the drive is not recognized as dvd player and do not write DVD.
  What should I do
  Thank you

  Hello

  I found a DVD-Ram driver Toshiba driver Web site.
  Please download and install this driver.
  Hope that this procedure will solve your drive problem.

• Re: Satellite A200 (PSAE3E) activation Bluetooth cause BSOD using Win 7 64 bit

  Heallo,

  I have a problem with Bluetooth in Satellite A200 (PSAE3E).
  My OS is Profwessional in Win7 64 bit.

  When I install a pilot system BT did everything correctly, then by restarting (after inviting).
  When the WiFi and BT switch is off, everything is ok but after turning a wireless connection with this switch after fiew second computer shows dump and does not work... Restert help until the next turn on the switch on the front panel.

  What's wrong? I am trying to install the drivers, unistalling everything and install...

  Thank you very much for the help.
  Jan

  Hello

  Have Hmm you tried reinstalling the BT stack once more?
  How about Wlan driver update? Have you tried that too?
  If this isn't it.

  Here you will find the BT and Wlan Toshiba Europe page Portal Portal:
  http://APS2.toshiba-tro.de/WLAN/
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite PM30: Not able to write CD

  Whenever I try to write in a new CD, I get an error message indicating that the CD cannot be written to. I tried different CD without success. My wife also has a Toshiba and has no similar difficulty with CD.
  If I changed a parameter and if yes, how can I go back?

  Hello

  What burning program did you use?
  I use the Nero software of engraving and it works properly.
  Have you tried to remove the disc?
  Sometimes lead removal problem. You must remove the drive from Device Manager CD. After restarting again the operating system should recognize the drive correctly. Maybe this procedure will solve your problem.

  Good bye

• Not able to write CD or DVD on Tecra A4

  Since the last time I posted my problem of not being able to write CDs or DVDs using TECRA A4 with Mat * 830s DVD burner, I tried all the methods that have been suggested, but without success. I tried to update the firmware to version 2, but I wasn't able to update the firmware. I get the target drive not connected message.

  Hmm, so it's the pathetic situation, I am not able to write even a CD single in 2 years I bought the Toshiba Tecra A4. Whenever I put a CD in it says "D: / incorrect function." Is there a solution to this? I expect a last hope to make it work.

  At the end of my patience, if I can't write a single CD even after 2 years.

  Hello

  > but I wasn't able to update the firmware. I get the target drive not connected message.
  This message appears because you have used a wrong firmware and is not compatible!

  However, I have read you first assignment and all advice offered were ok.
  But have you checked that?

  Try going into control panel-> system-> hardware-> Device Manager and then under dvd/cd devices select the drive and right click and uninstall and then reboot and see if it helps.

  Please check if deleting UpperFilters and LowerFilters in the registry helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16319&MessageID=59664

• Not able to write files to CD or DVD

  I'm not able to write files to CD or DVD. When I go to DVD - RAM (d :)) properties, I see only the following titles: general, AutoPlay, material and sharing.) I used to see a record position, but now he isn't. How do I restore to open and activate the recording function? I use Windows XP Home Edition with Service Pack 3. Drive: HL-DT-ST DVDRAM GMA - 4082N. Please advice. Thank you.

  Hi mark,

  · You receive an error message or error code when you try to burn a CD/DVD?

  · Do you remember recent changes made to your computer before the show?

  I suggest you to run the troubleshooter from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  You can also check the links below: CD - R or CD - RW drive is not recognized as a recordable device:http://support.microsoft.com/kb/316529

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:http://support.microsoft.com/kb/321641/

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite U200: I am not able to burn DVDs

  I have a problem with the DVD writer:

  Since I formatted (and then reinstall with the restore CD that was with the computer at the beginning), I am not able to burn DVDs!

  How can I do to get that!

  And also, it's weird, instead of showing a DVD player, there are 2: one for the CD, a DVD, when it's the same thing...

  I am able to read the DVD, but I am not able to burn them :(

  > And also, it's weird, instead of showing a DVD player, there are 2: one for the CD, a DVD, when it's the same thing...

  It's very strange it s confusing two s WEIRD appears in MY computer

  What you could do is remove the player of ODD (CD/DVD) Device Manager, then restart the laptop.
  Please check if the CD/DVD would be recognized correctly after reinstalling again.

• HP DVD Writer does not read or write DVD, but only the CD

  My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.

  CD/DVD players use different lasers for reading/writing DVD from the CD.  All indications would point to your laser DVD as having failed.  You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.

  HTH,
  JW

• DVD RW drive (D :) will not read or write DVDs)

  My computer can not read and write DVDs and CDs.  Please tell me how to solve the problems.

  Thank you very much!

  Sue

  Hello

  Someone helped me to fix my computer, the problem disappeared.

  Thank you very much.

  Sue

• Satellite A200-193: unable to write a DVD 8.5 G

  Hello

  I tried to burn a DVD Double Layer (8.5 G) with Disc Creator software, but unfortunately, it doesn't work and I don't know why.
  I tried with another software, but the problem is the same.
  The combustion starts and finishes correctly, but after that, when I try to read the DVD, this one is empty or not readable.

  DVD I used: Verbatim 8 x DVD + R Double layer
  Various forums indicate that there may be caused by the firmware of the DVD? What is your diagnosis?
  I hope that you will be able to give me a solution for this problem.

  Best regards.

  Below the information on my laptop.

  [PC information]
  Satellite A200
  PSAECE-01F00PFR
  BIOS version: V1.80
  TSSTcorp TS-L632D ATA Device TO04 CD/DVGW

  Hello

  Can you please explain what you mean it doesn t work? You get an error message or what is exactly happening?

  Have you tried different types of DVD blank? I always use DVD-R and not DVD + are so you should try it with a DVD-R. You should buy the disc Verbatim or TDK. I have only good experience with these manufacturers.

  Have you tried with Nero? I always use this burning program and you must ensure that you use the latest version you can find on the site of the factory.

  Welcome them

• Satellite A200-1CR: can I install Vista using my Vista DVD installations?

  Hello

  I would like to get some answers to my questions...

  I have the satellite A200-1CR (PSAE0) and I want to install vista on my own... not with the recovery DVD but I have some serious questions...

  (1) may I have problems during the installation... (Drivers SATA, etc.), problems of BIOS or Toshiba has no restrictions?

  (2) what problem if I erase the secret (winre) partition and what is its purpose?

  (3) if I do a clean install with my DVD with my vista... If I want in a future close that I can use the recovery DVDs I got it or not?

  (4) to the drivers section for my laptop for each part has 5,6,7 or 8 drivers for win vista... which is good, or it's all the same?

  (5) in general, what do you propose? Are there reasons why not to do my format? I did a large number of formats in desktop, but never in the notebooks.

  Sorry if you tired with my questions and sometimes my bad English...
  Thank you in advance...

  Why not.

  As to the question;

  (1) possibly the Vista operating system does not recognize the HARD drive during the installation of the OS. In this case you must install storage Intel Matrix (Robson package) Manager first! It of a driver SATA and can be found on the Toshiba or Intel driver page.

  (2) Windows recovery environment (WinRE) is placed on the hidden partition and it of necessary to restore a damaged operating system.
  The Vista operating system automatically creates the hidden partition and Windows re installing the OS.

  (3) Yes, you can use the Toshiba Recovery CD. But it erases the entire HARD drive always.

  (4) take a newer version

  (5) generally I put t see any reasons to get in shape. The preinstalled Vista operating system has been configured and all the tools of Toshiba, drivers and additional software should work very well.
  I don't recommend a new format if the operating system is working well.

  Good bye

• I am not able to burn DVDs on my Satellite A60

  Hello!

  I have a Toshiba Satellite A60 with a Pioneer DVD - RW DVR-K13A. And whenever I try to burn a dvd, it does not work. The drive detects the dvd but I can't burn. I tried several burning such as folder software now! and Intervideo WinDvD Creator. What I need to upgrade the burner or something.

  And the format of the dvd are DVD - R and I checked the manual, and it says: I am able to burn DVD-R.
  Thanks in advance.

  Post edited by: Slintas

  Hello

  This path is not easy to tell if there is only a few small problem or maybe a malfunction but from your description, I assume that the reader can read but not write DVD media. In this case, it is really possible that the drive is faulty.

  If you have tested with different DVD media and the different burning applications, I'm pretty sure that the drive is faulty.

• Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit

  Hi all

  After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
  And he did it when I got Vista.

  Can someone help what to do?

  Thank you very much:

  Adry

  Hello

  Have you installed the driver for the card reader?
  Have you noticed an unknown device in Device Manager?

  Please see the page of European disk from Toshiba for the card reader driver.
  Satellite A200-1N7 belongs to the PSAE3E series
  I found the driver of the card reader for Vista 64-bit
  Usually the Vista driver should work on Win 7 OS too

  If this does not work, then try the drivers released for A500 or L500 series!

  Welcome them

• Satellite L300 with WXP - cant write DVD

  Hello

  I have the Satellite L300-1AQ (PSLB8E) with the original operating system Vista installed also, I have XP (Dual boot).
  The problem is with XP, I can't write DVD, when I go into windows Explorer, the drive is listed as a DVD - RAM drive, it seems that XP does not recognize it as a DVDR disc. It will play the DVD.

  TssTcorpCDDVDW TS-L633A.
  Any help much appreciated

  What application you use to write CDs and DVDs?
  Have you tested with NERO?

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX