Satellite A200 not power external USB devices in mode 'sleep'

Similar Questions

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• Satellite L450D not start - think usb device is connected

  Hello. I have a portable satellite L450D running Windows 7, which will not start. It gets to the loading of the windows with the windows logo page, but it will not go beyond this point.

  I tried repairing the system, and that tells me that a device is always connected to the laptop. I think it's maybe my phone, I had connected by usb last week. The usb cable is removed physically but the laptop obviously thinks that it is still connected.

  I'm passed through different service options - system repair, System Restore, restore the last good config, boot into safe mode but nothing seems to work.

  Ive tried to connect the phone while the laptop is trying to start and then disconnect it but still no luck. The laptop still think that the phone is connected.

  Ive not tridd remove the battery from the laptop, as it's apparently quite difficult.

  Any ideas anyone? Thanks in advance

  Hello

  I would recommend you check the boot order in the BIOS.
  Go to the BIOS by pressing F2 by turning on the device.
  Now, press F9 to get the default settings and save the changes press F10.
  Also check if you can disable the legacy USB if it s is not available, ignore this tip.
  Now, restart the laptop and test if it would boot from the HARD drive.

• Satellite A200-1If - drive external HARD after a while is "unknown device".

  Hello!

  I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
  Can it be caused by not enough power in the USB port?

  THX for any help or the workaround

  Hello

  Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

  I hope this helps you with your question

• Satellite A40: How to boot from an external USB device?

  Dear all,

  I wonder if it is possible to start A40 - 261 (BIOS v1.50) from the external USB device such as a flash or external HARD disk drive?

  Thank you in advance,

  Oleg

  No Oleg, it is not possible to
  You can only initialize the USB FDD, HDD, CD/DVD and LAN

• Satellite A200: Cannot properly use external USB devices

  I encountered a problem with my Toshiba laptop and I can't fix it, and I'm in need your help please...
  The problem is that when I connect a USB portable device (an external hard drive, USB, iPod, Flash memory... etc) with more than 8 GB of memory...
  It is not properly installed in the Device Manager and appears under "USB bus controllers.

  But it does not say that it is an unknown device. It normally appears with his name, but he is not properly installed (it does not say that either) where it is supposed to be a camera under "imaging devices" in a specific category (hard drive under "drives"), and so on

  And I can't use the unit because the HARD disk does not appear in 'My computer' and my iPod cannot be used

  I would like to inform you that this problem is with all USB devices with more than 8 GB of memory.
  Not a single device. I tried a lot of features to ensure that it is not a problem with the unit.

  So this is a problem with my laptop and I installed Windows several times but no progress.
  Thanks for your help in advance...

  Is it XP or Vista?

  If its XP, make sure you have at least Service Pack 2.
  This hotfix can help XP see large capacity media:
  http://support.Microsoft.com/kb/934428
  but that doesn't really affect USB external HDD.

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• External USB devices are not recognized

  * Original title: Ext usb devices appearing is not in my computer

  ACer laptop WIn 7 amd a8 quadruple-heart: when I log about 1 T external usb 2.0 or 3.0 hardrives or key USB 64 G,.
  Device Manager displays the devices, but they do not appear in the list of computers. I have other ext hardrives and the keys that operate without problem.
  I have to go to disk management and see that they appear but they do not have a drive label assigned.
  Then I have to give it a label letter manually it will appear under my computer.

  I tried the same features on a laptop HP with Windows 7 without all these questions.

  Thanks RTierra

  I have found a more permanent solution. At the command prompt, type Diskpart

  type

  automount

  If the answer says disabled, type

  automount enable

  Once I did, my USB keys have been recognized automatically when it is plugged.

  Why the setting has been disabled? who knows.

  I hope this helps others.

• Satellite A200 - Webcam disconnected message 'unknown device '.

  My integrated webcam has stopped working. I downloaded and installed the latest driver available (Chicony 1.7.115.0213) but still does not work the camera. When I run the software assistant camera it tells me that the camera is disconnected. On the other hand, there is a notice from Windows telling me that there is an unknown USB device (Port_ #0001.Hub_ #0002) which I suppose is the camera. I tried Googling the issue or search in this forum but I have no answer. I would be really grateful if anyone can help me find a solution. Just in case, here is my PC details:

  Satellite A200-1DY
  Intel® Core 2 Duo
  Code: PSAE3E-01F00GSP
  Windows Vista Edition Home Premium
  Service Pack 2
  32 bit

  Thanks in advance!

  Victor

  Hello

  > On the other hand there is a notice from Windows telling me that there is an unknown USB device (Port_ #0001.Hub_ #0002) which I suppose is the camera

  Yes, it could be the internal webcam.
  Seems that the driver has not been installed correctly.
  What to say; first remove the old webcam software from the system.
  Then clean the operating system using a tool like CCLeaner, for example.
  After that, go into Device Manager and remove the unknown device.
  Restart the unit.
  Reinstall the webcam software and check if the device has been recognized again.

• Satellite Pro A60 PL: message: USB device can run faster

  Hello!

  I have a problem with the USB 2.0 drivers in my Satellite Pro A60 PL. everytime when I connect the message apear theres USB 2.0 device this device can run faster. What can I do about it?

  Hi guys

  I received the same message. It s not an error but a balloon tip Windows.
  I didn't find the reason for this message because my phone supports USB 2.0 ports too and I also connected a USB 2.0 compatible device.

  I've tired to remove the Device Manager, the controllers and the USB hubs and updated the Win XP operating system to the last State. I've also updated the driver chipset but sometimes (not always) this message again using a disc HARD 2.5 USB.

  I read in some professional computer magazines that this message is normal and it might appears with some SATA external USB hard drives. So you can ignore it.
  It s nothing serious.

  Greetings

• ProBook 4740 s will not feed if USB devices are connected

  G ' Day, I have a ProBook s 4740 and after taking the laptop to the site, when I'm home and plugged things back, by pressing the power button would see it for a few seconds and then od light out. The LED above the power would have flashes once and then turns off. Needless to say, it would not start up.

  After a lot of frustration, I found that by unplugging all (wired Ethernet and USB devices) and by pressing the power button it would start up and even when starting I could plug the devices and everything is OK.

  I had to return to the site today and when I came back again, it wouldn't power up until I unplugged the USB devices. USB devices are external hard drives only, all running through a powered USB hub.

  This configuration has worked without any problems for wells in the year I've had the ProBook.

  This could be the cause?

  Thank you.

  The last update :-)

  After downloading the BIOS update, I decided to wait until I had a break in things until I applied it. Then around one hour before, I saw the red exclamation mark on the HP Support Assistant in the taskbar. Open it, there was an update of the available BIOS, so I decided to let him do. At this point, no indication that it was the F.60 update.

  I hate doing these updates that work at the machine code level where if things go wrong, they can go horribly wrong.

  Well, everything went well. Updated the BIOS and restart the computer. I went back in to the support assistant and got the information on the computer, and he says that it is now the F.60 version. If she went from F.43 to F.60

  I power it off, wait a minute, then restarted with everything plugged in and it worked correctly.

  Thanks again for your help.

• Satellite A200 - denying power to the top

  Hi, we have a Satellite A200 that worked very well until the last time we it turned off (from the start menu). Now he simply refuses to be able to save - seeing power line turn on once it's in, but that's all.

  Any tips?

  Thank you

  Joseph

  I have a tip for you, but I m not very good if it will work.
  However, it s worth a try.

  First, remove the battery and unplug the AC adapter.
  Then, you need to wait some time (1 hour).

  Then connect the power adapter to the computer (try it with & without the battery)
  Crossed their fingers and try to turn on the machine.

  Good luck

• Satellite M40 (PSM42) - boot from USB device

  In the BIOS of my Satellite is not any choice to begin with USB (only floppy drive, disk, CD). Is it possible to use a USB - HDD for booting (instead of the internal drive)?

  Hello

  You can start only this features:
  USB FDD, HDD primary, optical devices, network (LAN)

  You cannot boot from USB HDD.

• Satellite L770 dosen't find USB devices

  Hello

  I just bought a new computer laptop satellite L770 OS windows7.
  I found some problem there, computer doesn't recognize/find/use of USB devices that are connected to the computer.
  I can find the devices in windows, but windows can not use those.

  I can 'remove' sefily of windows device and plug it in again and once more to use it.
  But the problem is that every time I turn on my computer, I have unplug the device and reconnect those, which is really frustrating.
  I tried to find some windows updates and latest drivers for USB or the motherboard.

  I found an update either of those. I wonder if there is hardware problem on my computer. I would be really gratefull for all the advice!

  Hello

  Don t think that his laptop hardware problem
  You should definitely test this with different USB device; Mouse USB, USB HDD, etc.
  I also recommend the settings the laptop configuration using disk HARD recovery option.
  This will outline the laptop in the same State as in the first day of purchase

  It might help to check if this is just something wrong with OS