Satellite A200: nVidia 7300 Go does not save the display settings

I'm using the latest drivers available, but I can not even save display settings in nvidia
Control Panel. For example if I turn down the brightness and increase digital vibrance and apply
These settings, the next time that I reboot or run and release a game settings ALWAYS comes back to the
their default values.

I can't use a monitor external because the default brightness settings
are very painful! They are literally blinding! Color settings do not record of either.

Support for the New Zealands tech told me that it is a feature of Vista. What's supposed to be a joke?

I also get bad interference on the screen lines when using an external monitor. It's very bad.

Hello

Have you noticed that emits from the first day with the factory settings?

Tags: Toshiba

Similar Questions

  • Firefox does not save the proxy settings correctly

    I run Firefox 7.0.1 on Windows XP SP3 machine and I am behind a proxy server. We use a proxy script to my usual workingplace. However, on a trip, I have to choose a specific proxy servers IP address. After returning to my Office I change in the script. However, the next day, the settings are back to the IP address again, which means, FF does not save my settings correctly.

    Try:

  • Satellite A200-1TS - Win XP does not recognize the new HARD drive

    Dear Forum,

    My HD crashed, I installed a new, but XP will not recognize.
    I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
    Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

    Thanks in advance for your help

    Can you please tell us what model of laptop do you have?
    Maybe you need to load the SATA driver?

  • CS5 brushes Palette does not save the brush settings during navigation

    Well, it's weird.

    When I open the Palette of the brush (F5), it shows me the settings for the brush current (nothing new here) but when I choose another brush (from the brush Palette NOT in the menu at the top of the screen), it has the same parameters and the same boxes (Textures, double brush etc) allowed than the previous. Even if the second brush is not supposed to have their permit. What is the cause? Help, please.

    I have updates and the lates Wacom drivers installed.

    It seems that you select a new brush tip, not a new Brush preset.

  • Adobe Muse does not save the file

    Good afternoon. I have a problem with the file Adobe Muse. Once, I add to one of the accordion Widgets pages, Adobe Muse does not save the file. All menu files is no longer active.

    link to a screen problem

    Yandeks.disk

    link to a Web site already recorded and released

    price Esenina

    Please send your .muse file to my attention at [email protected] along with a link to this topic. Assuming that it is a recurring problem, it would be very useful to have more details on exactly what is being done between during the last activated menus and when they became disabled. A registration screen would be wonderfully helpful.

    If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.)

    Thank you.

    -Zak

    Zak Williamson

    Senior scientist

    Adobe Muse

  • Model of savings: it does not save the configurations of margin

    I am trying to save a document as a template, to save my master page and styles. But when I save it it does not save the configurations of margin. The document a. 875 "margins left and right, but when I save the document as a template, it saves the margins left and right 1". I have adjustments to market. Do not know what to do...

    That's ok. That's how we learn better - try something and see why it does not work.

  • CSS style for the display text (does not save the State)

    Hello

    I just upgraded from APEX to APEX 3.1 3.0 and display text (does not save the State) which I had set to display more by adding style = "color: #658bb1;" font-size: 25; "the field of HTML table attributes for the element.

    Since the upgrade, that has been lacking in the font size of the body (12 PT) and I can't seem to be larger.

    I tried to use attribute selectors - span [class = display_only] {color: #658bb1; font-size: 25px;}, but this only works in Firefox.

    Can anyone help please.

    Thanks in advance

    Graham.

    Hi Graham,

    I can't see your post exactly what you did!

    I tried your style here: [http://htmldb.oracle.com/pls/otn/f?p=33642:176] and it seems to work ok in IE and FF

    As part of header HTML of my page, I add:

    <style type="text/css">
    .display_only {color: #658bb1; font-size:25px;}
    </style>
    

    Andy

  • Question SCCM - "LANG_LIST a certain locale that does not match the regional settings of the serial number.

    I have a problem with the error 'LANG_LIST a certain locale that does not match the regional settings of the serial number' recurring.

    I'm trying to install Acrobat XI Std silently by SCCM.

    I used the Adobe Customization Wizard to create an STD which include the serial number of the volume that we have with our license purchases. Note that I am in Australia. I use the command line in SCCM for installation as "msiexec /i"AcroStan.msi"TRANSFORMS = /'D & B_AcroStd.mst' SB ' fails silently. If I install on a local computer using an admin command prompt and replacing /qb in the end, I get the above error.

    I have a few things to try to solve, after searching the forums adobe and other forums for the solution. The mst is only trying to install U.S. English & I even went up to use the Editor directly in the Customization Wizard and change some values in the property table for this problem. In the property table, I can confirm that LANG_SEL_DEFAULT = FRA, REGIONAL_LIST = FRA, LANG_LIST = en_US, ProductLanguage = 1033

    Is there a way to check the language specified for the ym serial number?

    Linda

    I contacted customer service and a live chat session. It turns out that the problem is to use a key volume license, you must download the installer from portal licenses on the adobe Web site. Once I downloaded from there, extract the msi file and used the same transformation, the installation worked.

    In other words, other downloads probably won't work for the silent installation of volume but works by Manuel installs. You will need to download it from https://licensing2.adobe.com/

  • "Your host does not support the current settings for comments.

    My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest.  I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale).  I get the following message:

    -


    Error

    -


    Connection error: your host does not support the current settings of comments in mode full-screen.  Try to reduce the color depth or resolution of your guest and try again.

    Impossible to enter full screen mode.

    Do you want to retry?

    -


    Yes No

    -


    Does perform a work around?

    Thank you

    Alan

    The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

  • E/s files does not save the items in the table

    I can't save the items in the table. If I quit the program and restart it, the array starts at 0 again. I want it from the value at which it stopped.

    Is this a flaw in the Subvi "Timer A1"?

    Thanks for the help.

    mhaque

    Your feedback nodes are defined overall boot on the first call, as evidenced by the glyphs.  If you are stop and start your program, must be configured to initialize worldwide on the compilation or the load, simply right-click and change the setting.  This should give you the behavior you're looking for, but does not exclude the intrinsic problems with the code.

  • Firefox and Palemoon does not save the settings of a Web site.

    He is a recent problem. I use Firefox 25.0.1 because progress of download in Firefox 26 changes are unacceptable.

    I use www.nzbindex.nl a lot - Out of the blue Firefox will not save the settings, but will Google Chrome. In my view, that the problem is a Java problem. Any advice would be appreciated.

    This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

    You can control and manage permissions for the domain in the tab currently selected through these steps:

    • Click on "Site Identity" (globe/lock) in the address bar
    • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
    • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    It is not advisable to continue to use older versions of Firefox with disclosed security vulnerabilities.

  • Satellite A200 - 19L - TV-OUT does not

    I have the Satellite A200 - 19L (PSAEC) with nVidia * GeForce Go 7300.
    The laptop comes with Windows Vista Home. I went down the system to Windows XP
    Professional with Service Pack 2.

    Its ok except for the fact that now I can't connect the computer to my TV (I used to connect with _RGB-RGB_ cable, my TV a slot RGB, TV is a Samsung LCD). With Vista, it was very easy to connect, but now I can't. And now I have this problem. I can't make this connection.

    I installed the forceware 156.55 and my driver version is 6.14.11.5655.
    If anyone knows how I can make this connection please answer.

    It will be _helpful. _

    Hello

    I m not 100% sure if my advice will help you to solve this problem, but usually you have to upgrade the BIOS to the XP version if you want to use XP on this Vista machine.
    In addition, you must install all the drivers of Toshiba in the right order

    Then you should be able to use the FN + F5 key combination which allows to switch to the external display as a second monitor or TV device.

    Good bye

  • Satellite A200-1 body weight does not start

    Hello

    I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
    I have checked all the power drive options very well.

    I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
    No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

    I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

    My only conclusions are that I have a dead motherboard or a power problem internal.

    Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

    Yes, that sounds like a serious hardware failure.
    Looks like the motherboard, GPU, or another party on the mobo may be defective.

    What about RAM modules? Did you check both?
    Please do

    Otherwise if there s no RAM issues then you will need a professional technician help.
    At the moment I put t see any other solution you :(

  • Touchpad on Satellite A200-1 body weight does not light when you tapoterez the top right

    Satellite A200-1 body weight.

    This has a double Synaptics touchpad mode that switches modes when you press on the upper right corner - at least he used to. Upgraded to Win7 and had to do a clean install as I had Vista Ultimate 32 bit version.
    Used the upgrade of Tosh package but the touchpad driver gave me the basic features, no double mode.

    Looked around and installed the driver of Luxpad V6.5 9.1.14 dated November 2, 2007. Played a little and everything came out to be almost normal, but the pad does not turn on & change the mode when I press on the upper right corner despite the checkbox for this being checked. It does turn on and work if I check the second option on the external mouse, etc..

    All ideas will be considered with gratitude that I tend not to use it. See you soon.

    Hi ple2011,

    Where did you downloaded Luxpad V6.5 driver? I can t find it on the Web from Toshiba site

    Is that on the Web from Toshiba site, you can download Alps Electric and Synaptics touchpad driver and you must install two drivers. You can download them here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

Maybe you are looking for

  • Satellite M300 guarantee for a power adapter broken?

    I have some problems with getting a new power adapter. First of all, I don't know if the warranty covers the power supply. Second, even if it does, the warranty (I bought a Toshiba Satellite M300, which came with a 1 year warranty, about 360 days ago

  • Cloud services is required for eprint?

    What should I download, install and run Cloud, to printing from my Ipad?

  • * CRITICAL ERROR * Momentics - Editor could not be initialized

    java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOf(Unknown Source) at java.lang.AbstractStringBuilder.expandCapacity(Unknown Source) at java.lang.AbstractStringBuilder.append(Unknown Source) at java.lang.StringBuilder.append(Unkno

  • BlackBerry Smartphones is 8320 software works for the 8310?

    I have recently moved and accidentally threw away my BB cd that came in the box with my BB. I am trying to download the software, but there is none for the 8310, only the 8320... Is it OK to use?

  • A half brick on a s205

    Hey guys,. I tried to update my BIOS with the data on the site of consumer.lenovo.com for my Ideapad s205 und the installation says that everything has been installed, it could restart, but when it restarts then it only reached the bootscreen in Wind