Satellite A200 PSAECE: Dual Mode Pad does not work XP

Dear friends,

My dual pad to stop all of a sudden.
I reinstalled the on/off button and touch pad drivers. But still nothing.

Y at - it a specific to the driver or software for the pad dual mode?

If Yes, what is it?

Thanks in advance!

My OS is Windows XP SP2.

Laptop model: Satellite A200 PSAECE (1 g)

This laptop has been pre-installed with Vista am I right?

It s I knew not what application you have installed or what drivers are missing on your laptop, but you must install the Synaptics and Alps Electric Touch Pad Driver to use the touchpad.

In addition, the BIOS must be updated to version XP.

Tags: Toshiba

Similar Questions

  • Satellite NB10T-A-101 - mouse pad does not work

    I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

    But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

    I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
    Any suggestions would be greatly appreciated
    Thank you

    Hello

    Have Hmm you also checked the FN + F5 key combination?
    This would enable and disable the touchpad as well.

    But from my point of view, it would be possible that the touchpad module is malfunctioning.
    I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

    Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

  • Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

    I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

    What can I do?

    Hi navarone_1,

    This means that the work of FN keys and you can t use the pad touch, right?

    Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

    You can find all the drivers and tools for your laptop on the Toshiba official European page:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

    Last but not less than first installation package of added value and Flash then cards support utility.

  • Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

    My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
    It is shown as Toshiba Software Modem.

    I tried so many times it does not work properly.
    I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

    When I diagnose the modem via the properties of the modem without issues considered.
    Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
    I mean that he can call on a mobile phone or phone of the Earth.

    A few times he suddnely connects but connected sppedis 24kpbs.

    But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

    It seems that there is a fault on my modem 56 k.
    I tried even uninstall and reinstall, but the issue still exists.

    Can someone help me in this case?

    Hello

    I don t think that the modem would be malfunctions.
    Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

    I recommend you configure the modem again.
    In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
    Delete the existing profile and create a new!

    Best regards and good luck

  • Satellite A200-14F - standby and hibernation does not work

    Hello
    I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

    I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

    If you have had the similar problem please write what I have to do.

    Concerning

    Hello

    > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
    After Installing Win XP, you must update the BIOS to the XP version.
    You should check the page European driver of Toshiba. There are BIOS for Win XP.

    After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

    Welcome them

  • Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time

    After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).

    New value pack installation has not been successful.
    Moreover, after upgrading the drive to DVD from Toshiba is default, too.
    Who can help?

    I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.

    When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.

    As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.

    DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.

    As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.

    Bye and I hope that you report your experiences with the Vista upgrade again.

  • Re: Satellite A200-1Mes: XP audio driver does not work

    Hello
    I have a problem with my audio driver (I use windows XP). I installed all the drivers xp and still does not work.
    Can someone tell me where to find a driver?
    Thank you.

    I hope that you are using Windows XP SP2 home edition. Anyway check it please this thread. Try using the instruction given by Eldorado.

  • Dual-mode touchpad does not work on Satellite A200-1Y0

    Hello

    I recently bought a Satellite A200-1YO PSAE3E model. I tried to activate the mode button dual pad, however, sometimes nothing no blue lights met etc. How will I know if this model has this feature?

    Initially, I got the Alps driver and tried to install the Synaptics one but this has removed the Alps a kind I had limited functionality IE no advanced settings option.
    I've restored this new one in the Alps.

    The operating system is Win Vista Home Premium 32-bit edition.

    Any help would be appreciated.

    Thank you

    > How can I know if this model has this feature?

    Touchpad on your laptop looks like on THIS photo?

    Otherwise there is no dual-mode option and the touchpad cannot be blue. ;)

  • Satellite A200-12 x starts but does not work

    Hello

    I had a satellite A200-12 x for almost a year with no problems at all until now.

    Since a few days ago, the computer starts up but when I get the password for my user it stops near work. The hard drive light stays on no - intermittently and made a little sound of cracking at regular intervals. It takes the computer more than 10 minutes to let the blue startup screen, then that more than a half hour to show my desktop. The hard drive light will occasionally be blink, which is when the computer appears to contribute normally, but only for a second or so. When I gert on the desktop, the light remains the same way and I can't work with it at all.

    It works ok in safe mode. I tried to restore the system, but it does nothing.

    Can someone help me?

    Thanks in advance

    What you mean to restore the system? Did you install OS using DVD recovery delivered or just roll back the OS to an earlier time using System Restore tool?

  • Satellite A200 - 25 X - remote control does not work on Windows 7

    Hello

    I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

    Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

    I hope someone here can help me.

    Thank you

    Hey,.

    Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    * Archive * > Satellite > Satellite a series > Satellite A200

    Check this box!

  • Satellite A200-1VP - new WiFi card does not work

    Hi all

    I just bought an intel 4965agn wireless card to replace the original card intel 3945abg. I bought the card on ebay, it's a computer dell laptop.

    I installed it (connecting the black wire on pin 2 and the white wire to Terminal 3). The device appears in the device manage correctly without any problem. I installed the latest driver from intel for this card.

    the problem is that no wireless connection cannot be captured. the utility intel built in diagnosis, the card seems to fail the test of material. The section troubleshooting said to check the Device Manager and install the appropriate drivers. I've done it before, so I'm not sure of the problem.

    any ideas?

    Thank you

    Hi ansarali,

    Why you traded a new WLAN draft N card if you can t use it? I want to say that your laptop was only equipped Intel abg card and for standard project you also need 3 antennas and as much as I know Satellite A200 are not equipped with 3 antennas

    In addition, the antenna cables must be connected correctly. This means that you must connect the white cable to the HAND and the black cable to the auxiliary voltage
    Check this box!

  • Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

    Hello

    I have a little problem with my laptop Toshiba A200-170
    Modelnummer: PSAE6

    I changed my system from Windows Vista to Windows XP.

    Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

    Please help me!

    One question;
    Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

    Please do!

    If you install the driver of sound for the first time follow these steps:
    Driver installation during the first:
    ---------------------------------------

    Step 1. Before installing Realtek HD Audio Drivers, press on the
    [Cancel] button if Windows detect the multimedia Audio device.

    Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
    drive and run the setup.exe program to complete the installation.

    Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
    "Digital signature not found" message, press [Yes] to continue the
    installation.

    Step 4. Finally, select to restart the system and press [finish] to complete
    installation.

    The system will reload the drivers and make some adjustments in the INF file
    file if necessary.

    Important: Please install the Microsoft KB888111 patch before installing the audio driver

  • Satellite A200 + Vista Ultimate - power management does not work

    No matter what I apply to the power management settings of the screen never goes and the PC never sleep or standby extended. Screen saver does not either - except once - yesterday, for the first time since I bought the PC in August. Has not yet done.

    I assumed that this is a bug in Vista. "Tech Guy" PC World (ha ha) cannot repair. Is it at the level of the BIOS or something else? Of course, there is an incompatibility between the OS and the hardware. Video chipset? If you choose a balanced power management, the screen slightly off if you take out the power cord, but that's all that happens. Power management is all set to default.

    It's exhausting, because whenever I want to leave the PC for a while, I have to put it to sleep manually.
    Anyone got any ideas?

    Thank you

    Peter

    Post edited by: admin

    Hello Peter

    First of all are the guys responsible for tech updates? They must offer that you support for the hardware you have and clarify also all problems, if you use a preinstalled recovery media.

    Upgrade is your decision, and it is possible that it may have some negative influence on the functionality of the OS. All this is quite complex. As you know Vista has own power management options. Toshiba install PVAT (ValueAddedPackage) and after doing this there are some additional settings.

    The question is: How did you get the OS upgrade? Did you do a clean install? Have you installed all the stuff from the download page of Toshiba including VAP?

    With other words: all the basic settings on energy consumption are defined in the BIOS. AFAIK in Vista is the management of clean energy implemented and Toshiba installed just a plugin. If these rudimentary BIOS settings are not changed, I guess everything works fine. Change the settings of the BIOS with an update, I can imagine that different settings will not work correctly.

    Hmm, that's really not easy to say what you can do. Maybe check for the last update of the BIOS and after doing that it is trying to put the clean install of Vista Ultimate. And, of course, you must install all the stuff from Toshiba following the document of instructions for installations.

  • Satellite A200-209 (ETA) shortcuts keyboard does not work in Windows 7

    Hello

    I have a problem with the hotkeys (Fn + some button) - they do not work.
    I think that the update of the bios can help, but I can't find the bios for Windows 7.
    I'm wrong or updating the bios will not help?

    Thank you...

    Hello

    I doubt s BIOS problem running Win 7.
    You need VAP (value added package) and utility of Flash memory card Support.

    I installed VAP and utility Support Flash Card which are released for other series laptop because my laptop is older and Win 7 tools are not out on my model.

    However, I chose the VAP and Support of Flash Card Utility for L500
    It worked.

  • Satellite A300D - funktion scroll Mouse pad does not work

    Hello
    I use a laptop A300D - 16 c. I have a problem with the mousepad wiered. The right side of the mouse pad, which is used to scroll the page, stop working. This has happened several times and very often. But I am not able to trace what exactly causes this problem. Whenever he stops working, there are different activities.

    A reboot of the system will not solve the problem and it will start working again. But I couldn't find the exact reason for the problem.

    It is very annoying, we the scrolling feature will stop working. All parameters of this mouse pad are the same and has not changed.

    Anyone know this problem with A300D and have a solution?

    Please share it with me.

    Thank you
    Méhul

    Hello!

    It's not easy to say what the problem is, but you should do an update from the touchpad driver.
    You can download it on the Toshiba driver download page:
    http://EU.computers.Toshiba-Europe.com

    Furthermore, you have the problem only with the keyboard or an external mouse too?

    Good bye

Maybe you are looking for