Satellite A200 - PSAF6A Vista: HDMI video resolution problem

Hello

Bought a Toshiba Satellite A200 recently, with a HD2600. Because I can't find an APA Help Forum, I hope someone can help me here.

I have the following problem.
I use another manufacturer AL2216W (the only available driver is for XP, which I installed it on Vista Ultimate without any problems) widescreen 22'.

The monitor is capable of displaying 1680 x 1050 (60 Hz). If I connect it to the analog port of the laptop, I can select the resolution and it works very well.

If I connect it to (via a DVI - D to HDMI Cable adapter) HDMI port on my laptop, the highest resolution is only 1440 x 900. I already installed the drivers several times, but it does not show the resolution 1680 in digital mode.

The strange thing is that the monitor is correctly identified with the resolution to 1680 x 1050.

I use the extended view option, since I want to use both screens.

Thank you

What do you think of technical requirements?
Maybe the graphics card does not offer this resolution for HDMI port. I don't think you can solve this problem with the latest driver from Toshiba. I know that you want to have the digital signal, but if nothing works try to use this adapter.

Tags: Toshiba

Similar Questions

  • Satellite A200 PSAF6A - Vista now does not start

    A200 PSAF6A - 02C01N Vista built-in HARD drive recovery

    My friend used this PC and she just closes without warning.
    Vista won't start now... Turn it on and it starts to load then apparently hangs on a blank black screen just before the Welcome screen.

    I tried to use Linux to access the drive to get its stuff out before you reinstall, but several different versions of Linux can not install Windows.

    I tried the system recovery running now the 0 key during startup, then releasing 0 when the pc started to beep.
    Starts the recovery of loading, then the screen goes blank for a while, then rises... error... F3-F000-0001 error code... Press ok to reboot.
    Press ok, error message will... screen is blank... drive hard HDD light shows work... but it is not closed.

    Tried to launch a drive to reformat Vista. Boots in the disk, loads the files then crashes, just like the original problem, on a white screen.

    Tried the XP disk running... works well until it gets to the part where you choose where you want to install... and said... cannot install on this pc it is no hard drive!

    Tried formatting disk with Gnome Partition Editor... It hangs in the review of the disc.

    I think the next thing to try is to throw the thing out of a tall building and see if it can fly...

    Anyone got any ideas?

    Hello

    HARD drive is recognized correctly in the BIOS settings?
    I think that the HARD disk is dead.

    Please check the last assignment under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140926
    Raver post the correct link in his assignment. Try to check the HARD drive.

  • Satellite A200 (PSAF6A) resets randomly

    Hello

    I have a problem with my Satellite A200 (PSAF6A) randomly resetting itself. It does not matter what job I do, or how long I let the laptop, it will be just black screen on me and reboot. Sometimes he'll do Mid-when the form starts, other times I can use it for a while before he'll do. It seems to be a problem which intensified during some time, occurring initially quite rarely, which is now so frequently that it makes the phone unusable.

    This issue seems to happen mostly when running off the AC power. When you use the battery I have minimal problems, until the battery runs out. Although stability is much higher when you use the battery, I can't confirm that AC is actually the cause of the problem, because it is a random problem and I will sometimes use alternating current for a long time without error.

    I can say that the problem is not caused by overheating or drivers/software/OS. The laptop has been maintained to be free of all dust blocking the radiator as well as for a new application of thermal grease for NB and CPU chips. Everything is running at the level of the standard factory.
    I tried Linux, XP, Vista, Win7 and can tell it seems to be a problem specific to an operating system or driver (he got the problem when no OS has been loaded yet).

    If anyone has had similar problems or knows what could be my problem, your help would be greatly appreciated.

    Zedski

    Hello!

    Did you try it with the factory settings? I mean the version preinstalled Windows that you can restore it with the Toshiba recovery disc. This disc contains all of the drivers and tools and with these settings, everything should work fine.

    Good bye

  • Satellite A200 PSAF6A - HARD drive is not recognized. No recovery of product

    The drive HARD in my Toshiba Satellite A200 PSAF6A-0US01N is not recognized in the machine or any other computer, so I can't run any windows/toshiba repair.

    I know that readers have a factory reset hidden on the disc and press 0 to the power upward, but with the unreadable disk, how can I repair my installation of Windows Vista?

    Hello

    If the HARD drive is not recognized by the BIOS or other laptops, then I would say that your HARD drive is defective.
    In this case, you need to replace the HARD drive.
    In this case, you will not be able to start the recovery procedure from the HARD drive because it works badly as he has already said

    Are you from the Australia? If you need a recovery disk, I recommend contacting the local Toshiba ASP to get this drive

  • 1IZ satellite A200 with Vista crashes every day without no reason

    Hello guys,.

    I have a Satellite A200 with Vista Home Premium installed. In the past months, the BONE is suspended every day, I was not able to detect the reason. nothing is having replied to the questionnaire, not even Ctrl-Alt-Delete, the only solution is to stop from the power switch.
    I do not found something wrong in the system log, so I do not know what to do. Toshiba PC diagnostic shows everithing OK.

    What can I do? Perhaps a cooling problem? A guide for cleaning?

    Thank you.

    Hello

    So to be honest, it's hard to say what are the really causes your system to hang. Possible reasons:

    HIV 1-infected
    2 problem of file system Os including drivers, programms...
    3 had to be clean
    hardware problem 4

    I recommend:

    1 search for viruses
    2 reinstall the drivers (especially as a vga and chipset drivers). Check installed programs
    3 use compressed air jet to blow off the dust from the cooling module.

    If this does not help, do a fresh install of the operating system. Then we will see what to do

    Welcome them

  • Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

    Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam

    I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?

    Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?

    I just want to be able to talk to my grandchildren...

    Thanks in advance,
    Sue

    Hello

    He is a Canadian for Toshiba laptop model.
    Please see the Toshiba Canada Web site to get the right webcam software:

    http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

    First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!

    Welcome them

  • Satellite A200 PSAF6A - cannot find drivers

    Satellite A200 PSAF6A-07G01N

    I can't find the download of the driver page.
    There is probably one. If there isn't one, what can I use instead?

    Thank you.

    Hello

    The Satellite A200 PSAF6A-07G01N is an Australian for Toshiba laptop model.
    The same laptop models were released in the United States, but the model number was different (PSAF6U - 02900T)
    But most of the drivers are the same and would operate on your Australian unit.

    Go to the Toshiba U.S. driver page:
    http://support.Toshiba.com/support/drivers
    and the search for model PSAF6U - 02900T get the appropriate drivers.

  • Re: Satellite A200 PSAF6A - his plays through speakers using headphones

    When I plug my headphones into the port, nothing happens, still plays through the speakers.
    Is it drivers or something, because I want it redownload.
    I have a Toshiba Satellite A200 PSAF6A.

    Hello

    This seems to be an Australian series for Toshiba laptop.
    You can find it here:
    http://www.ISD.Toshiba.com.au

    You will find the audio driver and the most recent BIOS.

    But I recommend to check the sound settings first.
    I guess that's a Realtek audio chip in the Realtek audio Manager panel you could supply some parameters that control the headphones and speakers.

    Tab of reading on the right you will find the headset by clicking right into this and check the options that are available.

  • Satellite A200 PSAF6A - question of upgrading the Bios

    I have a Satellite A200 PSAF6A and I am trying to upgrade the Bios as the current has a virus or something in it and I want to know how to do this with a floppy disk based BACK or how to make a boot disk for bios.

    Any help would be so appreciated thanks.

    > I'm trying to upgrade the Bios because the current has a virus or something in it
    Virus in the BIOS?
    Sorry mate but I put t believe that! Why do you think the ROM module where the BIOS is stored could be affected by the virus?

    In addition, the traditional BIOS (BACK as you say) is not available for download!
    You can find a BIOS based on the victory and these BIOS can be updated from windows system!

  • Satellite A200-1AX: very grainy videos after Win 7 installation

    Hello.

    I have a toshiba Satellite A200-1ax and uses it for Vista when I got it.
    I've got rid of the operating system and to install XP, thous install BIOS update for XP.
    I recently installed Win7 and everything is good. The only problem I have is with video files.

    Everything I look at is very grainy.
    I installed codecs and the catalyst for Win7 beta and the thing got a little better. Always rasterized.
    But the HD video files don't work at all. It's the same as having a video card that does not support HD.
    Audio shopping before the video.

    I have not changed anything with the BIOS.

    The problem may be there? Can I update the BIOS for vista?

    Windows 7 is not official on the market it s still in version beta and I think it contains many bugs at the moment
    It would be really interesting to know if the same videos will work perfectly with win XP or Vista.

  • The upgrade of the BIOS for Satellite A200 PSAF6A-07G01N

    Hi all

    I'm trying to solve some problems on my mother in computer laptop laws and it looks like a few things low level. I want to do a BIOS update, as on other laptops of my this has solved similar problems.

    The problem I have is to find the good BIOS to use. On the Support download page I select the right model A200 PSAF6A-07G01N etc. You then get to the options of 4 or 5 and the version numbers and types are not very obvious.

    Model: A200 PSAF6A-07G01N
    OS: Vista 32 bit

    I tried to download the only version of Vista 2.6 - 1.98 MB, but it gives me a BIOS for the PSAE3A not PSAF6A which is my model (are they the same?)
    Filtering by Windows Vista & XP you get version 5.2 2.73 MB, but the name is very generic.

    I don't want to kill the laptop so pointers on what BIOS should I use?

    See you soon

    Jack

    Hello

    You probably have the Australian cell phone model. Therefore the right place to search for the BIOS is under http://www.mytoshiba.com.au/home

    Go to help > downloads and choose your model of laptop. you will find BIOS updates for your laptop model.

    Good bye.

  • Satellite A200-1SJ - Vista reinstall WLan driver every time after reboot new

    Hello

    I have problems with communication wireless on my satellite A200-1SJ. When I swich on my Windows Vista early computer installing wireless network card drivers and the installation is not successful.

    I tried to install the latest drivers, but it does not help. In Device Manager its written as wan windows cannot load driver (code 31).
    The same problem is with the bluetooth adapter that does not work as well.

    Connectivity doctor say that any (LAN, Wlan) is swiched of when I am connected to the LAN and even information on missing bluetooth connectivity Doc.

    I tried to reinstal drivers and connectivity doctor, but it did not help.
    I would be grateful for all the help.

    THX CoRrUpT3R

    Did you check that you have downloaded the latest drivers from this page: http://eu.computers.toshiba-europe.com?
    I'm not sure of what causes this, but try to completely uninstall the wlan and bluetooth drivers, restart.
    Vista try to install them again?

    There may be a problem with your user account and you have not full admin rights. Try to log on as an administrator or create a new account using the privileges and do a reinstall of the drivers. Do this with the doctor of connectivity also. Could help.

  • Satellite A200 reporting screens not correctable hardware problem blue

    My model Satellite A200 PSAFCA-01H00J is blue screening and reporting of a non correctable hardware problem. I disconnected all devices, including the mouse.

    All tests of memory and the device driver may report any problems. I unplugged and reinsert the two memory chips.

    There has been no hardware or changes to software other than Windows to auto update.

    This machine runs on Vista SP1. I dug the following message: Root cause found Bugcheck 124 unknown parameters 0x0, 0x95f7c3f0, 0xb2000040, 0 x 800. MSDN Info for this can be found at
    http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557321.

    Anyone know where I should look for this hardware problem?

    If you remove the second module of RAM is still blue screen?

    I saw 0 x 00000124 on a similar laptop and it was a problem of CPU.

  • Re: Satellite A200-1DY - Vista 64bits 2.60 Bios is the same as 2.50?

    Hello

    I have a strange problem in my Satellite A200-1DY, last Friday I tried to update my Bios.
    First of all, I had a problem, I couldn't update because it gives me an error:
    + Update error - 200 has no update + or something like that of error checking.

    Then I disabled in the winplash check option and everything works well, it seems like updating all blocks and finally the program restarted laptop but Bios still version 2.50 and it seems like nothing has changed. I didn't understand anything.

    I have Vista x 64 but my computer was installed Vista x 32, and the strangest thing is that if I try to update the Bios after that format whith laptop Toshiba cd recovery Vista x 32 everyting works fine and I have no problems.

    Hello

    Just a note; Satellite A200-1DY belongs to the series of PSAE3.

    The Toshiba page provides three different BIOS for this laptop.
    Currently, there is a BIOS 2.60 for Vista 32 bit and 64 bit and 5.6 for Win XP.

    Three BIOS versions are different, and if you use the Vista 32-bit, you must use the BIOS designed for Vista 32 bit.

    BIOS 2.5 is not the same as the BIOS 2.60 I think there is a difference

    However, as far as I know the 32 bit Vista was preinstalled on this A200 series and the recovery disk should also contains the Vista 32 bit.

    I put t know why the 2.5version is always visible on your A200 but I guess the BISO update has failed and may be related to the fact that the winplash check option has been disabled.

  • How to change the brightness of the screen on Satellite A200 on Vista

    I have a problem with the brightness on my Satellite A200 - 14 d in vista, the default settings have very high brightness and when I change the brightness after a reboot there are default settings... (VGA is GeForce 7300 go)

    As far as I know there is nothing strange. The same thing was happening to me. If you want to have the brightness of the display on the lever of the lover all the time, it must be changed in power options. Please select your preferred profile (symmetric for example) and set the LCD brightness to the lower level.

    It works for me.

Maybe you are looking for