Satellite A200 - shortcut keys do not work

Similar Questions

• Satellite A200 - FN keys do not work

  I have the Satellite A200-1N2.
  I have fresh install Vista ultimate 32 bit because the last owner has lost the device driver and all disks in this laptop
  So, I download all the driver and utility from Toshiba website and install I install and cofigure toshiba Assist, but I can't use volume key with the Fn key, and on the other also.

  Please me tips

  Thanks before

  Hello, Mona

  It is not easy to say what the problem is here, but to have good working OS with all Toshiba tools and utilities, it is important to install all the stuff the order of good facilities. Visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads and choose your model of laptop PSAE3E and check the document Instructions of facilities.

  Simply install (available on the download page) all listed stuff in order exact facilities.
  After having done that, everything should work well.

  Just a question: what do you mean with volume with the Fn key? Do you hear the silent box with FN + ESC?

• Satellite A200 - FN keys do not work after upgrade to Windows 7

  I recently updated my A200 to Windows 7 32 bit. Since upgrading my FN key no longer works. I can't find the correct driver.

  Anyone having the same problems? Or anyone with a solution?

  TKS
  Praepositus

  Hello

  The fact is that not all the models Satellite A200 with Win 7 drivers released.
  Technical support VAP utility and flash card is important.

  Added value package was released for most Toshiba laptops
  Card Flash Utility is available only for a single series.
  For example, Sat L500 contains Flash Cards Support utility download and install it!

  He that will not help so I doubt that you will get the FN button work

• Satellite A135-s2326 - shortcut keys do not work after installing XP

  Hello

  I have Toshiba Satellite A135-s2326

  I kill Vista and installed Xp on it, but the shortcut keys do not work now.

  Someone knows how to fix this?

  Do you mean the FN button functionality?

  Well buddy, the question is clear like a Crystal, the buttons FN don t work after the Win XP because the necessary drivers have not been installed.

  But first he must know that it is a series of models Toshiba us.
  I checked the Toshiba page us and unfortunately, I didn't find any Win XP tools or drivers for this model of laptop.

  It seems that you will have to use the laptop without the functionality of the FN button if you want to use Win XP. :(

• Satellite L500-13W: how to enable the Wlan with Win 7 - shortcut keys do not work

  Hello

  I recently acquired this laptop and I installed win7 64-bit teacher. The first problem was that the wireless card has not been installed, but I go to the Toshiba website and download the new one, next to this i can not activate the map with the fn + f8 key, it's the only way to activate the card.

  I already downloaded some drivers and utilities and I can not activate the card, the shortcut key does not work and there is not another switch, software does not work either

  Any help will be welcome
  Thank you

  Hello

  Hmm. Win 7 drivers are not yet out, but I found some beta readers on the Toshiba page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Maybe you will find some Win 7 drivers for series L500/505

  Otherwise I would recommend you to check if you can activate the WLan in Device Manager-> properties-> Advanced tab Wlan card

  There are a few additional options, that maybe the WiFi we / off would be there also.

• Satellite A30: FN keys do not work

  Satellite A30 FN keys do not work

  Hello

  What especial of the fn function does not work?
  If you want to use, for example the FN + F3 or FN + F2 you need preinstalled power saving.
  The Fn key functions depends on the application of 3rd as a saver or display pyromecanismes change utility for FN + F5.

  You should check the saving of Toshiba for the necessary drivers and reinstall it.

• Zbook Studio G3: Polishing of shortcut keys will not work

  Dear Experts,

  I bought the week last Zbook studio G3 and found that brighteness and switches are the image of the screen between the display shortcut keys do not work. before operating system is win 7 and now already updated to win10. I don't know if something is wrong with the driver etc...

  look forward to hearing from you soon :))

  Kind regards

  Jason

  Hello

  First of all, try to download and reinstall the driver package Intel gpu on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841&swItemId=ob_174684_1&swEnvOid=4192

  When reinstalling, restart the laptop.

  If the above does not correct the problem, try to download and reinstall the HotKey driver on the link below.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_173720_1

  Kind regards

  DP - K

• I have attached my keyboard wireless 1. 0 has to my new computer, but the shortcut keys do not work.

  I have a new Windows 7 computer, to which I added my keyboard and wireless mouse 1. 0a.  When I tried to load the software Intellitype Pro 5.4 and Intellipoint 5.4 I get an error of incompatibility.  Shortcut keys do not work.  I think I need new software.  Can help you.

  Hi jamesMacmillan,

  Try the latest version by first link is for 32 bit and second link is for 64-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=0B806F53-A8B8-4E10-9B4D-23F85040AE93

  or

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=489e92c6-0946-4CF9-8E0F-fa1db4fe7b9c

  Concerning

  GT4U

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Shortcut keys does not work in CS6

  Since the upgrade to CS6, all shortcuts keys do not work.

  For example, pressing "M" to go to the marquee tool has no effect, but "Command-T" (for processing) works very well.

  This little bug prevents me to change one of the main tools, which hurts the flow of work badly enough.

  Ah! It seems that there is a preference for her under general > use Shift key for tool switch.

  All is right with the world now.

  Thank you!

• Satellite Pro A200 - Fn keys does not work with Windows Vista

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
  BIOS version is now 2.20 - WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]

  After the installation of the operating system, I installed "Value package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) that contains the "utility Flash Cards". In my understanding, the installation of the "value added package" should allow the use of Fn keys.
  This doesn't seem to be true or not true.

  Here's what's happening.

  -Prior to installation of the 'value-added' package, all Fn keys did not work.
  -After installation of the "value added package", if the process of TCrdMain.exe is running, all Fn keys do not work.
  -If I remove the startup TCrdMain.exe and I restart the PC, only a few keys Fn function (Fn + ESC, Fn + F1).

  There is no way (or I have not found a way) for all keys Fn works.

  Someone knows how to fix this?

  Thanks in advance,

  mme000

  I am not sure, but it may be because of the SP1. I installed Vista Ultimate on A200 and stuff all listed (drivers, tools and utilities) from Toshiba support page.

  Contains your Vista DVD facilities SP1 or you install on your own? If you install Vista Ultimate Edition (without SP1) and all the stuff on the Toshiba support site order Instructions of facilities.

• Satellite L670 Fn keys do not work after the upgrade to Windows 10

  Hello

  I ve upgraded my Win7 L670 to Win10. After upgrade do not work key Fn. is it possible to recover the functionality of these buttons in Windows 10.

  Wolfgang

  Hello

  Each cell function requires special tools and utilities.
  In the case of FN keys, Toshiba software controls this feature.

  But as far as I know that the Satellite L670 won't get any utility Windows 10 so probably this key will not work running Win 10.

  Here the details on the 10 Windows upgrade:
  https://Forum.Toshiba.EU/showthread.php?83832

• Re: Satellite C650 - some keys do not work normally

  Toshiba Satellite C650 series, reinstalled Windows 7, problem with the keyboard, some keys do not work normally, some keys are intchanged... for example. the sign @ is located above the right shift key but now the types of the '2' i.e. the SHIFT key functions of these keys are reversed... the same with other keys 2-3... What is the problem? How to solve it?

  Thank you & best regards

  You have preinstalled Windows using original recovery image, you got with your laptop (Win7 preinstalled Toshiba)?
  I ask this question because I want to know if the keyboard is compatible with the language of the OS.

  Have you tried to change the keyboard input language?

• PROTECTED R830 - shortcut keys do not work to help to win 8

  Hello!

  I have a protected R830-10R with Windows 8 Professional (64-bit) installed.

  As it is has no drivers for Windows 8, I installed Windows 7 (64-bit) drivers.

  The problem is, my shortcut keys don't work (FN + X) and it is the only function of Toshiba, I can't live without.

  How can I solve my problem? And what other drivers do you recommend?

  Thank you.

  > How can I solve my problem? And what other drivers do you recommend?

  You will need the Toshiba Value added Package and the utility support flash card to win 8
  But as you said, this software is not available for win 8, so you wait for this software.

• U940-11 x satellite: FN + keyboard keys do not work correctly

  Dear all,

  I have problems with my Toshiba Satellite recently bought U940-11 X, serial number 2D015354K.

  1. at each reboot the laptop my keyboard settings are not accurate and symbols and function keys do not work properly. So it is also not possible to enter the bios via F2 after reboot.
  I have to press CTRL + SHIFT to have my keyboard works correctly. I have to do this every time I use my laptop.

  2. the touchpad (Synaptics TouchPad SMBus) does not work after a few minutes. The only thing I can do is plug an external usb mouse. I have also tried using FN + F9 does not work.

  Please, can someone help me on this?

  Thank you!
  Jeroen Raymakers

  > So it is also not possible to enter the bios via F2 after reboot.

  I see that the laptop using Win 8.
  You need to perform a full stop down to access the BIOS.

  See this document. It provides information how to change the settings to access the BIOS:

  + Perform a complete shutdown in Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  > I have to press CTRL + SHIFT to have my keyboard works correctly.
  Have you checked the presentation of the keyboard settings?
  For me, it looks like you are using wrong keyboard layout settings. Using the key combination CTRL + SHIFT changes between keyboard layouts.

  How do I change this?
  Go to the Control Panel-> regional and Language Options
  A click on the "Keyboards and languages" tab then click on "change keyboards" button. Then in the tree "Installed services" list, select the keyboards you don't want and click 'remove.