Satellite A200/W00 - fingerprint is not recognized by the software reader

Hello.

I'm running a laptop Toshiba Satellite A200/W00 (PSAF6A-0W00IN), and I recently installed my brand new Windows 7 Professional that I just bought.

I found drivers for Windows 7 for my laptop on site and installed the Protector Suite QL 5.8.0.4024, and very comfortable.

Once I restart my computer after installing on the connection screen where the button scan fingerprints is connect it says "Cannot read the scanning device", or something in that sense.

When I connect another pop up with the program on the bar showing the same thing, that my fingerprints, the scanner must be connected tasks. It is built into the laptop, it should not need to "plug".

I tried to uninstall the drivers for my biometric device, and then on the analysis of the physical changes he immediately detected my fingerprint again reader and reinstalled the drivers of it.

So my fingerprint reader is clearly working, but Protector Suite QL is not detect it. I don't understand why.

Someone has discovered this problem or knows how to fix? I can't exactly check the State of my scanner as it is built into my laptop.

You can use fingerprints (TrueSuite Access Manager) software and all the features it?
You have registered your fingerprints? Some problems?

Check the settings from there and be sure connect password option replace Windows with the connection of the fingerprint is enabled.
In all this history it's really strange that only the windows fingerprint logon cannot correctly detect the device.

I have a Qosmio x 300 with fingerprints. Have updated Win7 and everything works well. I may simply have more luck then you have. ;)

Tags: Toshiba

Similar Questions

  • Satellite A200 - 23K - card SDHC not recognized on Windows 7

    Hello, I have a toshiba satellite A200 - 23K.
    I just installed Windows 7, all drivers support drivers toshiba and all the updates of microsoft windows, including the suport of 32 GB SD flash cards memory.
    http://EU.computers.Toshiba-Europe.com

    But in the Device Manager there is a witch of the element named "mass storage controller" has not been installed (which would be the SD card reader), but I didn't know any driver for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" and installed the VISTA driver instead. Now, the look of the device is fine in Device Manager, but he only read a normal SD card, and when I insert a SDHC 4GB it came to nothing. In windows XP / vista and linux (fedora / ubuntu) there is no problem with SDHC (4GB and 8 GB Kingmax SDHC class 6).

    I would very much apreciate in advance if someone will make a driver for the card reader (I use it pretty mutch for photos).

    Hey Buddy,

    I think the problem is the Vista driver expired that doesn t work 100% correctly on Windows 7

    As much as I know Satellite A300, which supports Windows 7, is also equipped with Texas Instruments card reader, or at least the pilot is also from the same company with respect to the Satellite A200.

    In your case, I would try this driver, I hope it works! :)

  • Satellite A200: error message - system requirements to install the software

    There is another problem.
    I tried to install it but it shows error:
    ´This computer does not meet a minimum required for the installation of the software. Setup will close. ´

    Can you please tell me why.
    I have already installed new BIOS and the operating system is Vista.

    Vista needs of more computer resources as another Windows operating system.
    Perhaps the OS needs all the resources of the computer such as RAM, etc... and therefore impossible to install 3rd party software.

  • Satellite A200 1VP-hard drive not recognized

    Basically, I had a problem a month ago where I got an error message during startup and wouldn't start windows (missing file) can't remember which exactly but it came out of nowhere? It was working fine then when I restarted ANYTHING.

    Anyway I ended up installing ubuntu who found the HDD without any problem at all. Now to get this laptop on my fiance and ubuntu is not good for her! Windows setup is almost impossible! I tried to install xp because I have a drive, but during installation it doesn t find the hard drive at all!

    I found that I maybe 3rd need drivers sata/scsi party I put on a USB key, the installation when you are prompted to install these I can t install from a USB only a floppy? Computer laptop hasn t had a floppy disk?

    Could someone please help as I have tried everything I think and had no joy at all!

    Thank you

    Keith

    You can use nLite software to create a new XP CD and include drivers SATA (Intel Storage Manager) on this new CD of XP.
    The nLite is a freeware software and you can find and download from many Web sites.

    Google is the key ;)

    Good bye

  • Microsoft Arc Keyboard not recognized by the keyboard software

    Hello

    I recently bought an arc keyboard. Although the keyboard works fine, it is not recognized by the software intelitype.

    When I run the software (downloaded from the support section of the arc keyboard), the key settings tab says "no keyboard microsoft usb not detected"

    The Hardware tab says:

    "HID keyboard device.

    Manufacturer: (Standard Keyboard)

    Location: On the Microsoft Hardware USB keyboard

    Device: This device works correctly

    ***

    This is a wireless keyboard, it works, but I can not find a bluetooth device that is associated with the wireless.

    Reinstall the hard and software do not solve everything and I could not find a solution on the web.

    I am running Windows 7, 64-bit.

    I could use some help here!

    Thank you

    Hans

    Hello Hans,.

    Thanks for posting your query in Microsoft Community.

    I understand that the IntelliType software is not able to detect the keyboard of the CRA. The question could arise for various reasons, including a faulty hardware, damaged driver etc. I would suggest trying the following methods and check if they help to solve the problem.

    Method 1:

    Run the hardware and devices troubleshooter. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
    Open the hardware and devices Troubleshooter

    If the issue still not detected or resolved, proceed to the next method.

    Method 2:

    I suggest you try to install TWO software provided for Windows 7 in the following link of support for Microsoft Arc Keyboard. Check if the keyboard is detected.

    Microsoft Accessories: keyboard Arc

    If the problem persists, I suggest you refer to the following article which allows troubleshooting of common keyboard problems.

    Troubleshooting: keyboards

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Some Microsoft Windows Update cannot be installed - Satellite A200-W00

    Hello

    I had a problem with updates on my Toshiba Satellite A200-W00 Machine. I have two specific updates that fail permanently.
    I have been in contact with Microsoft staff who sent me troubleshooting step by step to try, but I had no chance. These updates are:

    * Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB956390) *.

    * Update for Media Center for Windows Vista (KB955519) *.

    * Update for Windows Vista (KB953155) *.

    It was one of his emails

    The problem description, I understand that several updates could not be installed and you have tried a few troubleshooting suggestions, but the problem persists. If there was any misunderstanding, let me know.

    Faced with this situation, the problem may occur if the system files are corrupted. To continue troubleshooting, please first temporarily uninstall security programs and test the update again. If still no, please, take your time and try the following steps to fix the system.

    On-site upgrade
    ==========
    Although this operation will not remove or modify the files and installed programs, I suggest always that we back up important files before you do. In addition, we may have to reinstall the device drivers after this operation. Thank you for your understanding.

    1 start the computer and access to Windows Vista.
    2. Insert the Windows Vista DVD in the DVD drive of the computer.
    3. use one of the following procedures, as applicable:
    If Windows automatically detects the DVD, the now Setup screen. Click on install now.
    If Windows does not automatically detect the DVD, follow these steps:
    a. Click Start, click Run, type Drive: \setup.exe then click OK.
    Note: The drive is the drive letter of the computer's DVD.
    b. click on install now.
    4. When you reach the type of installation you want screen, click upgrade to upgrade the Windows Vista system files.
    Once finished, try to update again.
    Please, try the above steps and let me know the results soon. If there are any questions or concerns, do not hesitate to contact me.

    I look forward to your reply.

    Best regards

    Bill

    However, Vista was preinstalled on my laptop and obviously I don't have the disk. Anyone knows where I can get hold of it or have the same problem with the similar updates. I tried to disable my antivirus, firewall, antispyware drive controls, clean ups etc and nothing.

    Any help would be appreciated.

    Thank you

    Hello

    You didn t receive a Toshiba Recovery disk?
    Then maybe your laptop was equipped with HARD drive recovery option?
    Please see your manual how to start the recovery procedure.

    According to your announcement of some system files are damaged and it may be necessary to reinstall the entire operating system.

    Welcome them

  • Satellite A200 - Firmware update is not possible

    Hello

    Toshiba Tempro (version v.2.3) informs me that a firmware update is available. He directs me to
    http://nl.computers.Toshiba-Europe.com/innovation/download_driver_details.jsp?id=62091&OSID=-1&driverLanguage=42&source=tempo&LNG=3

    The Satellite A200 (which I own) is mentioned in the supported products. When I download and extract the file (frmwre - 20080422163939.zip) and then try to open TS - L632H_TO02.exe, an error message is displayed:
    "This Firmware is not compatible with the selected drive.
    Contact your system manufacturer for more information on the firmware updates available for this drive".

    Is the message of defective tempro, the wrong file was broadcast on your download server, or maybe it's something that bad?

    Hey,.

    What CD/DVD drive you have? Maybe it is not compatible s, this could be possible, Yes.

    But if your engine is working properly, you can forget about this update. I would like to only do a firmware update if it of necessary.

  • HARD drive is not recognized on the Satellite 2800 200

    Hello

    First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

    I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
    When it is started is says "insert the disk in the drive system. Press a key when readya?.

    My bios is ACPI BIOS version 1.80
    In Pheripheral in Bios it says disc hard = not used Mode.

    On page two discs i/o: HARD drive: no drive.

    I tried two hard drives and the two were not working and not recognized in the BIOS.
    I have no CD of restoration.

    My questions:

    What kind of central computer has this laptop?
    Can someone help me with the recovery CD?
    What can I do to fix this?
    How can I change my BIOS so that the HARD drive is recognized?

    My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
    But also with the disk hard 10 GB of origin, I had the same problem.

    I hope you can help me and once again I apologize for my English.

    Hello

    I'll try to help you my friend.

    > When it is started is says "insert the disk in the drive system. Press any key when ready
    This message appeared on my laptop after the HARD disk is dead.
    I had to replace the HARD drive and reinstall the operating system.

    I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

    I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

    Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
    > How can I change my BIOS so that the HARD drive is recognized?
    The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
    But vary important is that you use a compatible HARD drive.

    > Can someone help me with the recovery CD?
    Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
    What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

    Greetings

  • Satellite P300 PSPC4E - new battery is not recognized by the operating system

    Hello

    I bought a new battery and it is not recognized by the system
    Satellite p300-PSPC4 win7

    drivers ok
    OK magazine

    The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

    the battery icon is present

    Thank you

    Hello

    Because your old battery is always recognized, I think you bought the battery is not compatible.

    That's why you should buy a compatible battery recommended by Toshiba.
    I think you can buy this Toshiba ASP.

    Welcome them

  • Satellite A60 - replacement HD not recognized in the BIOS

    I have an A60 which began to shut down and not start.
    I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

    I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

    The recovery CD installs saying there no drive selected.

    Can anyone offer any help or advice on what I can try next?

    Here are some technical details.

    Laptop Toshiba A60-672
    old MK4025GAS (40gig) drive
    spare MK4026GAT (40gig) drive

    Thank you
    Phil

    > I have an A60 which began to shut down and not start.
    I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
    For me, it looks more like an overheating problem caused by the internal temperature.
    It is a typical problem if the cooling fans are clogged and that air can circulate properly.

    > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
    One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

  • Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Hello

    Check with Toshiba support, online documentation and drivers (update or reinstall), and
    ask in their forums.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    ========================================

    How to activate Audio devices hidden in Vista and Windows 7
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer (you want to be sure
    the mic input is enabled)
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    -----------------------------------------------------------------------------------------------------------------

    Pilots may also need to be updated:

    Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
    Audio (this is an example and you can have an other name/maker).

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
    and then install the latest version. Restart and check after each test, not
    rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
    installed shows upward on the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check see the
    Disconnected devices and show disabled devices - check your micro - highlight
    then on lower right properties. Make sure that the appropriate injector is selected and check
    other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change
    .

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

  • Satellite A200 remote control does not work with Vista Ultimate

    Anyone know what I have to work for my TOSHIBA (Media Center) remote?

    I had Vista Ultimate installed on my Satellite A200 (PSAE6).

    Remote has worked on software pre-installed that carried out with (he was Deutsch).

    I almost tried everything, all the drivers are installed, I searched on the site of Toshiba drivers and nothing.

    Help, please.

    To my knowledge the Enbeded IR V0.0.0.6C was installed in the factory Toshiba Vista image. This looks like an application needed to run this command remotely.

    Unfortunately, the application looks like a part of the image of Toshiba and was published by download

    by the way; A200-xxx unit you have exactly?

  • Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver

    Hello.

    I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

    I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
    The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

    The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

    Now, I can't play games or watch movies.
    Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

    I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

    If I try to put it above it is always black.
    Can someone help me?

    Thank you very much

    Hello

    First of all, you should visit this Australian page from Toshiba:
    http://www.ISD.Toshiba.com.au
    You will find all the drivers for this model of laptop.

    I checked and found that there is a BIOS v2.5.
    Check if the BIOS needs to be updated (if the older BIOS is installed)

    In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
    Install it!

    Last but not least the Win XP should be updated to the latest state!

  • 6 10 iPhone iOS is not recognized by the laptop Win10Pro

    6 10 iPhone iOS is not recognized by the laptop Win10Pro

    After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

    Why is this happening?

    I come to the last iOS 9.x.x?

    Y at - it and the new driver I need to download on my PC?

    I started to automatically backup icloud, but I want to import photos directly to my PC.

    Thank you

    Vicki

    Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

    TT2

  • I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

    I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

    This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

    I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

    Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

Maybe you are looking for

  • Cloning a hard drive

    The motherboard on my 2008 MacBook Pro 15 took a fatal plunge. I saved the hard drive and put it in a USB enclosure, tested and it works fine. I have a MBP 15 2009 I picked up someone else in good condition and would like to clone the system and the

  • ui.key.chromeAccess & Ui.key.contentAccess ignored

    Hi, I recently switched to Firefox from Chrome. However, I noticed that alt + keys are always used by the browser on the web pages. I tried the old evolution ui.key.chromeAccess and Ui.key.contentAccess fix. But this time the settings are completely

  • Satellite P20 S303: I can't get the drivers I need

    Today, I had serious problems, reinstalling Windows XP on my P20 S303.I used a normal windows cd and I can't get the drivers I need, although I downloaded almoost everzthing there on the support page... The following devices still do not work:Network

  • measure the distance between 2 impulses (PCI-6221)

    Hello I have a digital signal that sends a pair of impulses (100ns width each) roughly every 100ms and I measure the time between two pulses of a pair (with a resolution of 100 ns).For the moment, I got a card PCI-6221 to accomplish this task. Unfort

  • Folio 13-2000 password bios

    Deactivation of the system code 59603746