Satellite A205-S4707 - cannot run camera on Windows 7

Hi all!

I have Toshiba Satellite a205 s4707, with Windows 7.

It has the latest drivers Toshiba bios is after update, but I can't launch the camera. I tried everything I found on the internet but not worked for me.
I tried to install a different software (not later), reinstall, update...

I GIVE UP!

Pls help someone! Show me that there is another way that it will run my camera!

I have the driver installed, but in Device Manager, I have warning with "Chicony USB 2.0 Camera" - code 10.

Help! PLS!

Hey,.

Error code 10 in Device Manager means usually only it s a driver problem...

Which Toshiba page you downloaded the latest webcam driver?
Using Windows 7 32-bit or 64-bit?

In your case, I would like to delete the current version of the software of the webcam. Then restart your computer and install the latest version of it.

Tags: Toshiba

Similar Questions

  • Satellite A205-s4707 and WXP

    What is my Satellite A205-s4707 capable of top ranked to windows xp?

    A downgrade to Windows XP should not be a problem.

    On the Web from Toshiba site we I didn t found any drivers, only a few for WiFi, reader of cards and to this day.
    But I think that this would not be a problem because you can search on external Web sites for drivers like Intel, Realtek, etc.

  • Satellite A205-s4707: High Temperature of the touchpad and HARD drive

    Hello

    just bought a toshiba satellite A205-s4707 notebook PC series and my problem is that my touch pad becomes heat when I use to a few ours.
    Is - this normal, also my drive hard temperature reaches 135 degrees fahrenheit.

    If you can help me with my problem will appreciate

    HM, I Don t think it's a problem because your machine is not working properly, doesn´t it?

    I mean, you really have a system very powerful which is packaged in a minimum of size.

    Please compare your machine with a desktop computer and you will recognize that you have some cooling devices well less than a desktop computer with a similar performance. So, Don t worry, it's normal that a laptop gets a little warmer.

    If something begins to melt, then it s critical. :) But sometimes won´t. ;)

    Welcome them

  • Windows xp drivers satellite A205-S4707

    Hi, I have a problem - I can not find all the drviers xp for my model. Currently I have windows vista - there are problems with the performance of the Oracle Applications 11i (now I can use that in one place - different versions of oracle applications in various places causes problems). Maybe the drivers from a different model adapts to A205-S4707. If you have any ideas please give answer to this post. Thx for all suggestions

    And one more thing - sorry for my English :)

    Hello

    This laptop was designed for the American market.
    Therefore, you can try to check the Toshiba website for the drivers.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

    If the XP drivers are not released you should try to use the drivers on the chip manufacturer sites.
    You need drivers only certain currents like graphics driver, LAN, WLan driver driver, etc. and these drivers can be downloaded from 3rd party sites.

    For the pilot of the GPU, you can check the;
    * www.omegadrivers.net * or * www.laptopvideo2go.com site *.

    Good bye

  • Satellite A205-S7443 - need LAN driver for Windows 7 32 bit

    I have a Satellite A205-S7443 and I bought it with Vista. So now, I bought Windows 7 and install it but now I have the problem with ethernet LAN driver. When I installed Windows 7 it only detected the wireless lan card and the driver has been installed with Windows, but I don't have connection to the local network. There is no

    Help guys. I need driver for ethernet LAN for Windows 7 32 bit

    Thank you

    Hey,.

    After installing Windows 7 have installed all of the important drivers that you can find?

    Your model of laptop is an American model, and so you can find all the drivers on the Toshiba U.S. page tools:
    http://www.CSD.Toshiba.com

    If you search for your model, you will find all the necessary stuff for Windows 7 32 bit. Download and install all the drivers, then your LAN port should operate as usual.

    If you have any other questions, just post again ;)

  • Satellite A205-S4607 does not start after windows vista update

    Hello

    I was installing updates in windows vista, but the battery was low and the computer is turned off, then, at the beginning of computer doesn´t, only the hard drive led is light but the screen is black, please can you help me?

    The model is Satellite A205-S4607

    It's not so easy...

    Try to remove the battery and unplug the AC adapter, then wait 30 to 40 minutes, plug in the AC adapter and try again. Maybe the problem is resolved.

    Give me a feedback, what happened.

  • Cannot run TIME on Windows 7

    I recently downloaded and installed ESXi 5.5 on a server dell for the assessment and I would start it management.  So, I downloaded the file of open management of vSphere and cannot run it.

    In any case, when I try to run it in VMware VMplayer, I get the following errors (click on retry after first error):

    ovaload.pngovarunerr1.pngovarunerr2.png

    Thus, all the instructions on how to use this file on Windows 7 would be great.

    Thank you

    Jon

    VSphere client was the correct solution - given the issues raised in other forums on the limits of the ESXi 5.5 client vShere - I loaded rather ESXi 5.1 on the server.  It does not always meet http: applications - but telnet confirmed the connection.  Then found Vsphere client download and installed and connected successfully.  Found 5.5 client, but decided not to risk the upgrade at this point.

  • Satellite A110-178 cannot run the Da Vini Code game

    My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

    Encountered exception! You want more information (will take several seconds to determine)?

    When I choose 'Yes', the following lines appear:

    (Slayer) Address of exception

    [no info game crash]

    IMAGE HELP STACK:
    TArchive::operator = + A9D22

    MAP FILE STALKWALK:

    All I can do is press 'OK '.
    the program stops, and that's the end of it.
    I don't know what that means, is there a problem with my hard - or software?

    If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
    because this is not a cheap game,

    Thanks in advance,

    Davina

    Post edited by: Davina Deleye

    I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

    Maybe you can find answer here. Read it carefully.

  • Satellite L650-16w - cannot run game using the old GPU driver

    first of all I had to say that my English is not very good, so if there is a German support it would be easier for me to write with German support.

    2 weeks ago, I bought a new toshiba Satellite L650-16w.
    After installing my favorite game, I'm trying to start this game, but I can't because of this error message: "3DGM gm_OpenGLError, param err error:"not enough memory"", last error win32 #8 "»

    After that, I tried the latest driver and installed the driver version 8.723.2 on the home page of toshiba, the amd driver does not work, but the error is still there.
    I tried many things but I wasn't able to run this game on my computer.
    I'm sure it's a problem with the driver because when I uninstalled the drivers launched the game! (there was only the installed windows vga drivers).
    Unfortunately, I had a low fps rate of relay with windows drivers, so I was unable to play this game without the pilots.

    I hope someone can help me to launch this game and there is no solution to run this game on my pc.

    My oem is windows 7 64 bit, and Yes this game still works on win 7 64 bit because I got to play this game on an another win 7 64 bit system.

    Hello

    Usually, you should always use Toshiba driver because drivers are supported for GPU overheating protection.
    If you want to use other drivers, then you can do this at your own risk.

    I googled a bit and found two pages that provide updated ATI drivers the:
    www.OmegaDrivers.net/
    www.laptopvideo2go.com/

    Perhaps one of the pilots of the mentioned pages would you play this game for sure.

  • Satellite A205-S4797 - cannot load the hard disk drivers

    OK, got my Satellite about 1 year ago (warranty has expired in September, it took a DUMP in October) :_| thought it would be just as good as my other hand, I think that it is Vista I hate, still had some kind of problem. I tried recovery disks that they even run that it says can not find * PREINST2.swm* after several attempts I gave up and bought Vista to reinstall because it wasn't loading drivers to repair the installation.

    Now cannot yet complete a clean install. Can someone please tell me how to load my disk drivers or where I can find them?
    And now, when it starts up it says hard drive failure may be imminent at this stage, I want to just get to the top and runnig and I managed to install XP but only SP1 and all my device drivers aren't compatible.

    Been without Toshi3 for 2 months and my children took on others and now my little desk! :|

    Help, please

    Can meet us on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140519? ;)

    I do not understand why post you twice, but hey it's your decision.

  • Satellite A215-S7422 - cannot run the recovery disc - model corrupt system?

    When you try to run reinstall on my Satellite A215-S7422 drive, the installer won't work, telling me that "this CD is for Satellite A210 A215 Satellite. Please use good CD.

    When I run the information system, it identifies the model of my system a string as gibberish in the sense of: ' t.o &.

    He could not work because of this? Is there a work around? How can I give a valid system model?

    g

    Hello

    I have heard on a question as when the DMI information is missing or damaged. You can read about it in similar topics.

    In any case, I think this happens when the motherboard was exchanged and the service center I forgot to update the DMI information on motherboard. If the computer model isn't recognized properly.

    You should contact Toshiba service center. Guys can update DMI information and help you solve the problem. :)

  • Satellite L10-194 cannot run after recovery

    Hello! I used my Satellite L10-194 for a few years, and he started to be really slow, I decided to reinstall the system (recover) to make it cleaner and faster.
    I found my recovery of product L10 DVD - ROM, but when I finished the system restore would not start. I tried the recovery for some time, and it does not help. Whenever I try to start the computer, when it goes to load the system it just turns off (I think that it is something like the blue screen flashes for a second).

    I checked the disk file image in advanced mode and HARD, and that's OK. But when I do HDD-> image in advance mode, after it is sometimes a moment when I have access to the command line. After getting "dir C:" I don't see a Windows directory (?), when restarting the computer does not work as usual. I'm doing something wrong?

    I tried another CD of product recovery of the second Toshiba laptop that I have, and it works, it installs Windows but without pilots and things (it's a completely different model from Toshiba). What should I do? I'm not sure if the use of system preinstalled for model is the right idea (and legal)?

    I had some problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

    PS.
    Sorry for my English, please correct me in my errors, to help me improve the language :)

    > I had a few problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

    I think that this is the reason why your laptop does not start after the recovery procedure.
    Seems that the drivers that are part of the image are not compatible with the new motherboard.
    Maybe the driver chipset or make sure you graphics card drivers some worries and windows crashes before starting the system
    Maybe you could star the windows in safe mode. Press F8 just after pressing the power button / stop. Then choose Safe mode.
    In safe mode, uninstall the chipset driver and the graphics driver and then try to start it again.

    If that does not help, then install windows using a clean Microsoft CD.
    Pilots should be placed on the page of European driver of Toshiba.

    welcome them

  • Qosmio G50 - 10I - cannot run Firefox on Windows 7 64 bit

    I would like to know if someone can run firefox browser (not in safe mode) on the Qosmio G50 - 10i using Windows 7 64 bit. Since I changed the operating system 32-bit to 64-bit, I can't use Firefox browser except change the browser in safe mode.
    Don't know if this is a problem with the computer or web browser.

    A control will be useful
    Thank you

    Hey Buddy,

    Of course, you can use Firefox on the Qosmio G50. Why it shouldn't be possible? Firefox can be used on all computers.

    In my opinion, you should try put it back. Download the latest version and update. Maybe it works.

  • Satellite A660-12E - cannot run the live CD of Fedora

    Hello
    I have the Satellite A660-12th, I want to install a dual boot on my computer, so first a fedora Live CD on USB creation. I have configured my computer starts automatically out of the USB, I get a screen that says "automatic Boot in 10 seconds...". "I chose fedeora live. I watch but after 3 minutes to see a message "no device root not found".

    Can someone help me please, I don't like windows 7 "

    PS: I download this version (http://download.fedoraproject.org/pub/fedora/linux/releases/13/Live/x86_64/Fedora-13-x86_64-Live-KDE.iso)

    RED

    Hey Buddy,

    I m not a Linux expert, but generally this Linux live CD can t be installed. You can start only to CD or a USB key because they don t write anything on the HARD drive. So I think that you need a different version.

    Here most users use the version preinstalled Windows, but maybe this article can help you:
    [You know a useful site for Linux on PC support? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

  • Satellite P300-220 - cannot run Recovery Disc Creator

    Hello

    Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
    Any idea?

    Thank you

    Hello

    Do you have something to change on the laptop before you start the Toshiba Recovery disk?

    It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

Maybe you are looking for