Satellite A210 - 16G (PSAELE) - how to use 4 GB and update the BIOS?

Hello! I hope someone can answer a few questions for me.

First of all is: How can I turn on my laptop to use all the 4 GB of RAM? OS is Win Vista Ultimate 32-bit with Service Pack 2. Now Vista all show the 4 GB of RAM, but don't use it. I activated the EAP in Vista, but still nothing. As I saw, I need to turn it on too memory remapping in BIOS but there is no option (my BIOS is ver.1.70).

The second question relates to the BIOS. Because my version is 1.70 and there are more recent version 2.00; I get benefits if I update to BIOS? Someone has updated to version 2.00? And there are more options in the BIOS after update to version 2.00 (for example the memory remapping or a similar option)?
I'm a little afraid to update BIOS, because sometimes my Toshiba freezes, and I would not hang during the update of the BIOS.

And the final question is there any changelog to the BIOS? So I can see what is added and changed, and what's new in the new version of the BIOS. Because I could not find anywhere.

Thanks for the responses to come.

Hello!

(1) you can use the entire 4 GB of RAM on a 32 bit OS. It is a due limitation of 32-bit technology. Windows Vista with Service Pack 2 may recognize the full 4 GB of RAM but not use it, more than 3.2 g.
Here you can find more information about this limitation:
http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

(2) about BIOS updated I can tell only must be made only if you have problems with the laptop. A BIOS update should never be done just for fun, because it of still a little risky. In the worst case, you can destroy the ROM module or complete motherboard.
Update the BIOS doesn't normally contain new features or options. It s bug just setting. In addition it can t solve the problem with 4 GB of RAM and Vista 32 bit if you think that ;)
If your laptop does not have 100% stable you shouldn't t update because it s too risky. Before the update, you should try to solve the problem of gel.

(3) If a change log is available you can find it on the Toshiba site. If you can t find, there isn t available.
That s all about this.

I hope I could help a bit.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L450-188 - how to disable ACPI.sys and update the BIOS?

    Hi, hoping someone can help me with a slight problem, I'll have

    I recently bought a Satellite L450-188 (number PSLY0E-03K019EN) running under Windows 7 64-bit

    I use the laptop with a DJ program called Rane Serato Scratch Live, I got latency usb problems, getting usb dropouts when I try to use the program on the smallest audio buffer position (which I expect to be able to do)

    When I contacted support at Serato team with my problem, they suggested that I run a program to check the time DPC on my laptop, when I presented the report to them, they said ACPI.sys was the origin of the problem and suggested that interest me to turn it off, but I wasn't too comfortable with that.

    The other suggestion was to try to find updates the bios for my laptop, but I'm not too set up with that sort of thing, and I'm worried I might damage the laptop maybe installing the wrong thing.

    Can someone give me advice on this topic, because I don't know what to do

    Thank you
    Jim

    Hi jimbob_1,

    Normally the ACPI means Advanced Configuration and Power Interface and control options for energy savings.
    So if something is wrong with the ACPI.sys file I recommend reinstall Windows using Toshiba recovery disc.
    By the way: are you running pre-installed Windows version or another?

    As Akuma writes that you can download the BIOS update from Toshiba Web site. http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

    Your laptop belongs to the series of PSLY0E, so you can download latest BIOS.

    Before you begin the BIOS update, close all running programs and extract all the files from zip archive. You start the update as an administrator and connect the AC adapter. Also, make sure that the battery is fully charged.

  • Satellite A210 - 16G (PSAELE) and the full support of Windows XP Home edition

    When Toshiba engineers starts to move and get value added package for Windows XP for models PSAELE? It is very difficult?

    Found all the drivers, but the keys (Fn + F1-12) do not work! You go there for support customers or and sit, while Microsoft pays money for its Vista crap?

    1 year I'm waiting for the package of drivers and utilities full XP for my A210 - 16G?, but he did not communicate!

    I ask the support of customers instead of Vista support!

    Oh, moderators work faster then toshiba laptop support =)))

    Seems that Windows XP drivers are not out on the Satellite A210 - 16G (PSAELE) series.
    Why? Who knows, but always is he that the XP tools that control the functionality of the FN are not available especially for the A210 PSAELE

    Then you can try to install the tools available for other series with your own hands and hopefully they will work. Sorry, but that's all you can do

  • Need Win7 BIOS update for Satellite A210 - 16G (PSAELE)

    Hello

    I can't find the new BIOS update that includes SLIC 2.1 for my Satellite A210 - 16G (PSAELE) table.
    I found "ACPI BIOS Flash version 2.00 for Satellite A215 (PSAFGU/PSAFHU)" (link: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1871687& rpn = PSAFGU & modelFilter = A210-ST1616 & SelCategorie = 2756709 & selFamily = 1073768663), but I'm not sure, which is suitable for my laptop model. It is mentioned in the list of the applicable models A210-ST1616. It is compatible with my laptop Satellite A210 series model for?

    Also I find this link to download BIOS: http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU. Can be here is the answer to the question of mine?

    People, please help with suggestions?

    Hi eldorado24,

    Satellite A210 - 16G (PSAELE) belongs to the European models because it s listed on the page of Toshiba Europe. This means that the Australian page BIOS update will not work and it s listed for the other models (PSAFGU/PSAFHU). If this update is not done for your laptop.

    On the European (http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp) page, you can search for newer BIOS version:
    Laptop > Satellite > Satellite a series > Satellite A210 > PSAELE

    Check this box!

  • Satellite 1000-Z2: driver Intel GPU does not - I should update the BIOS?

    Hello

    I just downloaded and installed the latest driver for satellite 1000 Z2 graphics card which is Intel(r) 82830M chipset Driver revision: 6.14.10.3889. However, it does not work.

    I wonder if I should update my BIOS first. Thank you

    Hello

    It s always a good idea to update the BIOS. Thus, it would be the best you try the BIOS updated and then reinstall the graphics card driver. You can also (if it isn't already) check www.intel.com and download the drivers from there, they are sometimes more up-to-date than the drivers of toshiba. :)

    Please give some comments if the installation of the graphics card took place after the BIOS update.

    See you soon

  • How to change data objects and update the corresponding task and task forms?

    Hi all

    I modified this thread because I found that I had many questions to ask.

    1.
    I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.

    2.
    Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?

    3.
    What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?

    Thanks in advance,

    Kind regards

    Yanis

    Hi Yanius,

    (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

    (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

    (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

    I hope that I have answered your questions.
    See you soon,.
    Felipe

  • Satellite Pro P100 GPU Fan off or full speed after updating the Bios to 4.20

    Hello

    After installing the "nine" update Bios 4.20 the GPU fan is when the laptop is cool. While working with him the GPU temperature increases up to 100 ° C (very hot), then the fan starts to run at medium speed and the GPU is cooled. After a restart, for example. the next day, the fan still works on the average speed or high (very noisy). With the bios version before this problem appeared.

    Someone at - it the same problem with his laptop?
    Someone there done the update of the Bios before 4.20 and can send it to me?

    Welcome them
    Rommulaner

    Hi guys

    May I ask which graphics drivers are you using?
    If you n t use the original graphic driver on the site of Toshiba and the laptop can starts overheating. Non - Toshiba GPU led don t support protection against overheating as the drivers of Toshiba! If the temperature of the GPU would rise to a higher level, then the pilot would diminish GPU performance to reduce the heat.
    Drivers graphic non-Toshiba don t control it and therefore the GPU could produce more heat.

    Another reason for this problem could be changed to value of table fan.
    I think that the cooling modules run faster and more often because the table fan has been changed in the BIOS. It may be necessary to prevent the overheating of the material.

    Concerning

  • How to use FOLLOW-UP and COMPRESS the clause of the CREATE statement TABLE?

    my oracle's 10g and the statement of create table below:

    CREATE TABLE S005.q100

    (

    Q1 tank (1)

    )

    NOMONITORING;

    After you create this table, I ask USER_TABLES, but the value of the follow-up column is YES.

    I think there should be no how is? and also I have the same problem with the COMPRESS.

    Thank you very much


    Hello

    Heap - organized tables are your usual routine tables. It is created using the BUNCH of the ORGANIZATION of the CREATE TABLE statement clause. This is the default value.

    The other variant of this clause is ORGANIZATION INDEX, which means that you will create an organized Index of Table. In other words, it is a table that is stored in a B-tree, like an index.

    You also have an EXTERNAL BODY, which means that you will create an external table. Here is generally flat files outside of the database that you can order the database to see tabular to use SQL (read only) against. You will also need the settings on how the data are presented on the file, so that your database knows which column will match that of the data.

    The COMPRESS on 10G is known as the "basic compression" and it works on ordinary table segment blocks, which are organized by a bunch of tables.

  • How to use FTP Client and manage the table in BB with JDE

    I'm a newbie to BB development. I have an application in mind, it is a simple ordering application. BB users can send order information to an ftp server. The BB will have some paintings as a customer table and the Order Details table (the two have only a few records). Since cannot use the Services of SDM BlackBerry because the license fees. I'll use JDE to develop the application.  Here are my questions:

    1. What is the best way to manage the tables (read/write)?  RMS, or embedded database (which one?)
    2. is there any ftp client in JDE, api can be used to send data to an ftp server?

    Thanks for help.
    PJ

    The exact figures for RMS sizes are available in this article:

    What is - size restrictions when you use the RecordStore
    Article number: DB-00656
    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800724/What_Is...

    So that your information is correct, in 4.6 or later, the per application limit went up to 512 KB.  I don't know if there is a limit on a single record in a record store. We must be careful of the terminology here, it's RecordStore or RMS - is not in BlackBerry terms anyway, PersistentStore (see next).

    The BlackBerry offers two other ways to store data.

    The first and most commonly used are called PersistentStore, and it is an a storage mechanism for objects, I am not aware of any restrictions, other than the memory of the device, about the size of an object that can be stored in PersistentStore.  The advantage with PersistentStore, is that you just persist an object helps you, rather than having to convert it to bytes (serialize) before storing and converting new (him deserialize) after reading it back.

    The second way is to write data using the FileConnection API, and you can for example use this to write data to the SD card in the device.

    EFF and PersistentStore use the flash memory in the device.  You don't have to manage yourself.  You treat all that identical objects, the BlackBerry operating system very cleverly manages to bring your items in RAM and save them in Flash, so you don't have to worry about the type of storage you have.

    I hope this helps.

  • How to use bind variable to update the DB 11 GR 2 access data

    Hello Experts,

    By DB version 11 GR 2

    Operating system Windows Server 2012 - 64 bit

    I want to update some data base record Access to oracle with database link. Here is my SQL, which works.

    UPDATE [email protected]_LINK
    SET "WorkCode"=1
    WHERE "WorkCode"=0; 
    

    But, I need to change that to

    UPDATE [email protected]_LINK
    SET "WorkCode"=1
    WHERE "DateTime"=:VARIABLE_DATE_TIME; 
    

    and a 2nd does not.

    Any code help or example?

    Ask2Learn

    Hello

    Use DBMS_HS_PASSTHROUGH

    try something of

    DECLARE
      c       BINARY_INTEGER;
      nr      NUMBER;
    BEGIN
    
      c := [email protected]_LINK;
    
      [email protected]_ENVOYF(c,'UPDATE [email protected]_ENVOYF SET "WorkCode"=1
      where "DateTime" = '||''||VARIABLE_DATE_TIME||'');
      nr:[email protected]_LINK(c);
      [email protected]_LINK(c);
    
    END;
    

    Hope this helps

    Hamid

  • How to use a directory and change the sizes of jpg

    Maybe I'm in the weeds here, but I'm looking to use an action to walk all files in a directory and for all jpg files to reduce the size of the longest side at certain age % and then save the file in a nother directory.  So I need to be able to:

    for all the files in the named directory {}

    look at the file type

    If {.jpg

    Look at the size of the image

    apply % next longest retractable age

    Save the file

    }

    }

    Simple stuff, but I don't know if stock allows me to do the walkor playback of the type or the criterion of size, etc.

    So if possible, can someone tell me the orders for action I need - or - another way to do this.

    Thank you

    Take a look at this video tutorial on a custom by Benjamin Root action. If you don't care no watermark, you can omit that.

    It includes the reduction of the images in a certain size, both landscape and portrait, adding web profile sRGB and save in jpeg format.

    Automate the tattoo Images in Photoshop CC - YouTube

  • How to create timer thread and update the data in qml

    See once again that the user selects the time then I have to open a plus qml, them what that time that the user has selected he will start him it and display in the texview of this point of time until compled times what the user has selected.

    the textview should show how the change of second... That is to say all like look.

    Please guide me what the correct feature I have to used?

    I won't go to timer or wire?

    Please guide me

    Now please tell me that you are able to see the image or not?

    Plese now answer the solution?

  • Satellite L30-PSL33E with Win XP - do I have to update the BIOS

    Hello

    After changing OS from Vista to XP, I need to know if there upgrade bios Bios XP and actually to update all drivers for XP drivers.

    Any help, advice appreciated, cheers.

    Hello

    You don t you do something if your laptop runs correctly ;)

    Fact is that the European driver Toshiba page does what a BIOS PSL33E L30.
    It s no matter what operating system is installed. Your BIOS is the same! It s independent OS!

    XP drivers are also available on the Toshiba driver page.

    See you soon

  • Need drivers of Windows XP Home for my Satellite A210 - 16G

    Laptops Satellite A210 - 16G (PSAELE)

    Need drivers Windows XP keys Fn + F and everybody find the Toshiba Utilities for this laptop with the latest versions?

    Hello

    I checked on the driver download site, and they are NOT available. You now have the choice to wait than drivers or to try the utilities from another machine (as the Satellite A200 - PSAEL *)

    Unfortunately, that's all you can do.

    Welcome them

  • Impossible to update the BIOS on Satellite A665

    Hello

    I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

    Please someone help me because I have no way to use the laptop without power still present.

    Hey Buddy,

    Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

    Try to update the BIOS on the pre-installed Windows version?

Maybe you are looking for

  • errors installing...

    i ' am having a problem that there are specific applications won't install I only get errors "this app can be installed at this time" so please I need a solution, I tried everything on the internet, but none of them worked for me... and another quest

  • When pasting in table, numbers transformed whole numbers

    Hi all I do the econometric work, and I have a problem when you try to export my table of results in a number (or, in this case, Pages too) file. When I copy and paste a file html in numbers, I get a nice table to the search, with each cell in his pl

  • Microsoft Exchange 2010 x10hosting Web site connection

    I have installation Windows SBS 2011 Essentials on my computer, and Microsoft Exchange Server 2010 and try to figure out how to connect my x 10 domain, mckittrick.x10.mx, to Exchange. I'm also trying to figure out how to get the correct DNS records,

  • Descjet HP 2050 all-in-one: I lost the disc to connect my printer to my computer

    I lost the disk that connects my printer to my laptop and got a new computer and need to print but I cannot connect to my new computer! How can I get a new drive or connect my laptop to my printer without spending too much money and do not buy a new

  • problem with font size (LV2011SP1) scheme?

    Hello I just found "interesting behaviour" using LV2011SP1: I try to set the font size of the elements of the FP like this: The upper graph is selected and I choose the font size = 18 in drop-down list of font settings menu. So, what do you expect? T