Satellite A210-248 does not recognize the 840 ECO mSATA SSD

I want to build in my Satellite A210-248 on the port of msata ssd.

When I build in the ssd bios dind't find the ssd, so I can't install windows in the ssd

Hello

Satellite A210 does not support port mSATA and therefore the mSATA SSD module cannot be used.
Probably, you have found a mini-PCI on the motherboard slot. It certainly looks like mSATA but its not the same thing.

Tags: Toshiba

Similar Questions

  • Satellite A110-294 does not recognize the wireless card

    Hello

    the question is:
    Why my Satellite A110-294 does not recognize the wireless card?

    I re - install Xp PRO with all the drivers.

    I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

    I don't understand, can you help me?

    Thank you
    André

    Hello

    To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

    You can find the latest driver for Atheros WLan here:
    http://APS2.toshiba-tro.de/WLAN/

    Just a question;
    You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
    The driver is missing, then the device must be marked with a yellow exclamation point

  • Satellite 1900 (PS192E) - does not recognize the CD/DVD

    Hey all,.

    I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

    When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

    If there is someone out there who could give me some advice, I would be extremely grateful.

    Thank you very much

    James

    Hello

    OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
    What version of Windows is it?

    If you want to install a driver for the graphics card go into Device Manager and select Update driver.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

  • Satellite L30-105 does not recognize the 1 GB of additional RAM

    Hi there I hope someone can help me

    I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
    and it's terribly slow with vista, not to mention programs.
    The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

    However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

    The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

    Are limited to only some of the Satellite of RAM?
    The old subjects indicate if kingston does not work try corsair.
    Other topics suggested to change slots
    Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

    Can anyone help? everyone knows about similar problems?

    I will not buy any more RAM to try different brands for the same issue to occur

    Hello

    The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

    > Why the RAM 1 GB module cannot be recognized?
    Perhaps the two modules are not compatible with each other
    I would recommend using two identical modules of the same manufacturing
    I use Kingston modules, they are ok for me

  • Satellite A200-1AE does not recognize the USB 2.0 flash drive

    I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
    The same USB works without problem on other computers with vista!

    Someone knows what to do?

    Hello

    First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
    After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

    Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

    Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

    Best regards

  • Aspire One d255 does not recognize the usb connected external ssd drive

    I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

    I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

  • Satellite L30-113 does not recognize the two modules DIMM RAM

    Hello

    I have a Toshiba laptop Satellite L30 113.
    It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
    It's DDR2 553 MHZ (PC4200.

    The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

    Did I miss something?
    They should be the same size as in the bad old days?
    What is going on?

    Thank you

    Adam

    > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
    Seems that the two RAM modules are not completely compatible...
    I've read several times on these issues and to be honest it s are not uncommon

    I advise you to buy two identical RAM modules ad then to try again

    I'm afraid there is no other solution for your problem of m.

  • Satellite L655 sometimes does not recognize the wireless card

    I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

    The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
    Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

    Under network card it has only ethernet. Its as if it does not exist.
    Basically the way to solve this problem is by restarting simply my computer until he figures it.
    Sometimes, it can take 5 or more times.

    Any help please?

    Hello

    What satellite L655-xxx you have exactly?
    As far as I know there are different models with different wireless network cards.

    Your BIOS is up to date? Please check this box.

    So now to a few proposals of solution:
    First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
    In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

  • Satellite A300-1J1 - does not recognize the CD key

    Hi all, after 3 days of searching for any type of information I've found this site and I hope that someone can help me.

    I have a Satellite A300-1J1, and had to do a complete reinstall of Windows using my recovery disk that was provided with the laptop (Vista Home Premium).
    In any case, the installation went well and he had restarted and said I had to activate Windows is not a problem, I thought looked under laptop for key typed in there and it will not recognize the CD as being for Vista Premium key. Now how is that possible that the disc that came with the laptop and the CD key is there?

    Any help is greatly appreciated

    Shaun

    Hello Shaun

    I know it may seem stupid now, but your story is somewhat strange. Why?
    To the first Satellite A300 laptop computers are never shipped with recovery DVDs. Recovery DVDs must be created by the owner of the laptop. All A300 laptop come with what is called HARD disk image. AFAIK some A300 laptop computers come with an additional CD/DVD but it is recovery of Windows XP Home or Vista 64-bit edition, but laptop always comes with Vista Home Premium 32 - bit (recovery of HARD drive image).

    So the question is what installation media you are using exactly? Is - this support recovery, that you created yourself or a version of Microsoft?
    Original Toshiba recovery image is created for each laptop model separately and should not be enabled.

    Recovery image can not be downloaded. If you want to have another copy, you must order it under https://backupmedia.toshiba.eu/landing.aspx

  • Satellite A200-1CR does not recognize the module of RAM 2 GB

    Hello

    I have a problem with the extension of the RAM.
    I have the Satellite A200-1CR with 2 x 512 MB of RAM.

    Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
    When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
    Where is the problem?

    What should I do to make it see 2 GB?

    Paula

    Hello

    I think the answer is very simple.
    Satellite A200-1CR can be upgraded up to 2 GB of RAM.
    This means that you can use max 1 GB of RAM in one slot
    You used 2 GB of RAM and this module does not seem to be compatible
    In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

    Welcome them

  • Satellite A205-S4577 does not recognize the SD card inserted

    Hello

    I have a Satellite A205-S4577.
    I just got 2GB sandisk wake up your phone mem card.
    When I insert the card into my card reader it does not even after that I restart my system.

    Can anyone help?

    Your laptop will recognize standard SD cards?

    There may be a compatibility issue with microSD flash memory cards.

  • Satellite Pro A60 does not recognize the accept/DVDs blank

    My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

    In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

    My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

    Help please!

    Post edited by: EDS

    Hello

    Have you also tried to burn DVD-R discs?
    I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

    I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

    Also check the Toshiba page for an update of the firmware!

  • Satellite L300 - Windows does not recognize the connected device

    I have Toshiba Satellite L300 series, PSLB8E. It came with a basic version of vista pre-installed window and it was working fine until I decided to update.

    I took it to a computer for an upgrade store to ultimate window.
    This version worked very well for a few weeks until I have received a message on the screen that says: 'I have to get a genuine copy of windows.

    Because ever since I started having problems with my usb ports, my computer couldn't detect something I connect to it (usb, printer, mouse, etc.) he worked with modem only, sometimes it would open my external hard drive but it does not have its drivers.

    I then decided to buy a window 7 home base, but instead of this problem will disappear, that it got worse as my usb ports completely stopped working.

    I tried all the stuff I can think, but nothing has worked. the problem I have is that I don't have the original disc in Windows vista

    Someone please help!

    I agree: installing drivers for Windows 7 is very important to get all devices work correctly. Windows 7 is much better than Vista OS and I don't see any reasons why your L300 Sat should not work properly with this Win 7 OS.

    I recommend you to install the Windows 7 system again by install completely clean.
    After that, download all drivers Toshiba Win 7 of the Toshiba UE driver page.

    Very important are the drivers as value added package, Chip Set Utility, card reader controller, display driver, LAN driver, WLan, Sound Driver, Storage Manager and driver of the touchpad

  • Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

    Hi all.

    I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

    I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

    Thanks in advance.

    The problem is simple.
    Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

    The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

    In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

    Mayen a user manual would provide details on the management of records.
    If not, then contact the ASP in your country and ask some compatible devices!

    At soon buddy

Maybe you are looking for