Satellite A210 restore failed (error: run the Chkdsk utility)

Similar Questions

• This is the message I get: "the file or directory C:\Documents and Settings\ALLUSE~1\APPLIC~1\Norton\{0C55C~1\NIS_17~1.127\IRON is damaged and unreadable. Please run the chkdsk utility. »

  Original title: this is the message I get:

  "The file or directory C:\Documents and Settings\ALLUSE~1\APPLIC~1\Norton\{0C55C~1\NIS_17~1.127\IRON is damaged and unreadable.  Please run the chkdsk utility. "When I type chkdsk/f to the command prompt it tells me that it cannot run while windows is open and asks if I want it to work when I reboot.  I say Yes and restart and nothing happens.  What I am doing wrong?

  Hello

  1. when exactly you get this error message?
  2. don't you make changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• House file corrupted XP - run the chkdsk utility

  I am running windows xp home and I have a pop up stating "corrupt Windows file or directory C: is corrupted and readable, run the chkdsk utility." Can you let me know how to solve this problem.

  Scan your disk for errors

• corrupted file? Run the chkdsk utility?

  I am trying to open some of my files and it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Open my computer, click on the drive (for example, drive C) > properties > Tools tab > difficulty check now, put a check mark automatically file system errors > start.

  If you receive the message that it cannot be done at the moment, you want to plan for the next reboot of the computer, answer Yes.

• Windows - corrupt file message, telling me to run the chkdsk utility - does not work

  This is the message I get: "the file or directory C:\System Volume Information\EfaData\SYMEFA. DB-journal is damaged and unreadable.  Please run the chkdsk utility. "When I type chkdsk/f to the command prompt it tells me that it cannot run while windows is open and asks if I want it to work when I reboot.  I say Yes and restart and nothing happens.  What I am doing wrong?

  This is the message I get: "the file or directory C:\System Volume Information\EfaData\SYMEFA. DB-journal is damaged and unreadable.  Please run the chkdsk utility. "When I type chkdsk/f to the command prompt it tells me that it cannot run while windows is open and asks if I want it to work when I reboot.  I say Yes and restart and nothing happens.  What I am doing wrong?

  Two observations:

  1 symefa seems to be linked to something of Norton/Symantec called "Symantec Extended File Attributes" that seems related to Unix file data, so why it is present on a Windows system is a good question. A position I've seen connects it with Norton Internet Security 2010/2011 and suggests that uninstall NIS using theNorton removal tool will solve the problem.

  2. the System Volume Information folder is a folder 'hidden super' which is not normally accessible.  This is where Windows XP stores the system restore points andother information important to the operating system .  I suspect that Norton/Symantec has decided to take advantage of the great hidden nature of this file in order to hide some of his own thing.  You can access the System Volume information as described herehttp://support.microsoft.com/kb/309531 and delete the offending file.  But I would get rid of NIS first and then delete the file.

• When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Can someone help me please, I don't know how to use a computer I was googlen 4 days! When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  From what you say, you are probably unable to start Windows.

  In this case, when you start the computer, keep tapping the key "F8" on the keyboard until the Advanced menu comes up. Then choose "Safe Mode".

  You will see something like your ordinary, here to enter office "chkdsk volume: /f" (replace with your hard drive volume, in most cases, it's 'c') at the command prompt.

  For reference:

  http://support.Microsoft.com/kb/315265

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to run the chkdsk utility

  I need to know how to run a chkdsk utility laptop always tells me that I have a corupt file and to run, but I can't understand how do

  There is a link in the post above say you how to operate!

  Your computer does not seem to allow links to work, I'll post it for you:

  1. Click Startand then click run.
  2. In Open, type cmd and then press ENTER.
  1. Use one of the following procedures:
  • To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.
  • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk/f and press ENTER.

    Note If one or more files on the hard disk are open, you will receive the following message is displayed:

    Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk/r, and press ENTER.

    Note If one or more files on the hard disk are open, you will receive the following message is displayed:

    Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Free Support Tools

• I have a file corrupt Microsoft. He told me to run the chkdsk utility, but it won't work. I can't defrag my pc because of this

  I have a file corrupt Microsoft on my computer. I have no idea what this file. When the warning it tells me to run my chkdsk utility. I tried to do, but it won't work. I can't defrag my pc cause when I try it tells me scheduled for the chkdsk utility. It really seems to be spoil and slowing down my computer. I don't know much about computers so it becomes really frusrating. Any help would be really appreciated!

  Hi DonnaPeterson,

  Click Start-> run, type &-> chkdsk c: / f-> ok. You will be asked to schedule the scan of the disc, restart your pc.

  If above used to work, start your pc in safe mode and try.

  I hope this helps.

• The file or directory to _ is damaged and unreadable. Please run the Chkdsk utility.

  Since a few days ago, I started having these notifications tray for two specific instant messaging programs, I am running on a daily basis:

  

  

  There is no problem at all with the two programs - they run flawlessly, as they have always done.

  but I have no idea what causes these notifications to pop up - something must be wrong

  So I was trying to run Chkdsk, the message said, opening cmd as administrator, then "chkdsk /f c:" but then I get this error:

  

  I did restart and wait that chkdsk is running just after start-up but then:

  

  How this can be resolved without having to reinstall windows?

  If you have the system file corruption, you are probably at the end of the rope - so to speak.  Try to rerun the SFC.  Sometimes a 2nd or even 3rd run corrects corruption.

  Try the system restore.  It can solve your problem if she wasn't there too long.  Usually, it is best to do the restore from SafeMode (F8 at startup)

  Much more likely, you will need to re - build.  Choice:

  1 restore the partition from the factory

  2. any re - install a Win7 disc

  3. implement non-destructive install

  If I were in your shoes, I would like to re - install Windows 7.  It's a tedious process - may 6 to 12 hours passed depending on the speed of your Internet connection and your computer, and it has the amount of memory.  Such a process will lead you to a purely clean and absolutely pristine system that will have significantly improved performance.

  First back up your data, but do something.  Windows Easy Transfer can create a file for a later transfer. For this, use a large external hard drive.

  Now find the software tester training from the manufacturer of your hard drive.  Run three tests to ensure you have a reliable hard drive before starting this process.  It may take a few hours, but I wouldn't do that until this, and you're confident.  If necessary, replace the hard drive - not a particularly expensive or difficult process.

  Choice 1: If your computer came with a factory restore partition, restore that.  Learn how to access the factory restore partition.  It is likely to be found using F8 during the startup of the existing system.

  According to what you have purchased, you must then many UN-installing of unwanted programs.  Don't let no one antivirus or internet security system installs until you are at the end of this process - the last thing you do.  Also do not put a password on your computer until you have completely finished.  If the antivirus or Internet security is installed in this choice 1, uninstall it.  Now start Windows Update, but first change so that it will give you all the updates Microsoft, not only Windows ones. There are probably hundreds of them and it will take hours, but you don't have to watch it.  There will be several rounds of updates.  Keep the new verification updated to what there not.

  Now, install your applications, but only the most immutable stable, for example Microsoft Office.  You can have a few more rounds of updates after that.  Do a Defrag.  No data yet.

  Then take a step that almost nobody does, but if you are already in a similar situation, even once, you'll thank yourself for making.  Create a system image using the Maintenance until the restoration.  Use of the DVD - from 2 to 4.  It will take nearly an hour, but when you are finished, you will have a DVD set that can be used to restore the system to this account or a new drive is precisely what you have so far.  While you're at home spend 5 minutes and create a CD repair system Windows7.

  Of course, after that, you can add your volatile applications such as Flash Player, etc..  Then run Windows Easy Transfer to retrieve all your data and settings.  It's positively amazing how it works, you will find that you won't see a difference with before except that it will be incredibly faster.

  Choice 2: Fact, I prefer this option. Use an original DVD of Microsoft Windows 7, preferably Service Pack 1. It can be any DVD of Windows 7 to the same variety of product - for example the publishing house and 32 or 64 bit depending on your system.   Make sure you have the key of Activation for Microsoft Windows written down.   The only downside to this option is that it is possible but not likely that you might have to find a driver.  This doesn't happen often because even the drivers that the Windows 7 installation process itself does not, will be probably provided in your first pass of Windows Update. Once you get the Windows installation, everything above will be the same.

  Choice 3:  Follow this link for a good description of how to do

  http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/   This choice will require a lot of time to Windows updates as well.

  Notes:

  I will not work on a computer with ANY Internet security product in this regard.  Everything you want or need is an antivirus product.  The other stuff that is part of their packages don't you will that cause problems.

  Intel has a utility to update driver (assuming that yours is Intel based) which is absolutely excellent.

  You don't need a disc burner program.  Windows had built.

  After you're done create a restore point.

  I am a professional long-term systems dealing with 160 client computers 'consumer '.

• Receive Error Message: "the file or the Directory/Users/owner/AppData/Roaming/Microsoft C is damaged and unreadable. Please run the Chkdsk utility.

  I get the above error message every time I turn on my computer.   In addition, all my readers bus do not work.

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Read the tutorial above on how to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a file of corr upt and said to run the chkdsk utility. How to find and run this?

  System Restore no longer works, computor very slow in opening.

  b

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• adcfgclone.pl error: RC-50014: Fatal: failed to run the auto configuration service

  Hi all
  
  I got following error while cloning an instance of R12 on HP UX.
  
  After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
  
  error...
  
  Start the synchronization context file system and its models with those of the database
  
  Database connection: impossible
  Support changing context OAM function: unverified
  Support OAM customization feature: unverified
  
  File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
  .
  .
  .
  No download file of context and its data base models. Connection to database failed
  .
  .
  .
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase. Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >
  
  [INSTANTIATE PHASE]
  AutoConfig impossible successfully to instantiate the following files:
  Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
  adcrdb.sh INSTE8
  
  
  Fate of automatic configuration with State 1
  
  RC-50014: Fatal: failed to run the auto configuration service
  Asked by oracle.apps.ad.clone.ApplyDBTechStack
  
  Kind regards
  Sandeep.

  Hi user;

  Please check:

  12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
  RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]

  It may be useful

  Respect of
  HELIOS

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• Restore failed - error code = 0 x 241

  I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.

  I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.

  I could really use some suggestions. Help, please.

  Thank you

  I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.

• RC-50014: Fatal: failed to run the auto configuration service

  Hi all

  We are cloning Oracle 11i production applications. It is a 3-tier application that DB is hosted on a node, simultaneously on other applications on 3rd node.

  The database has cloned successfully during the operation of the adconfig to the node at the same time we are facing problem.

  We get below error.

  RC-50014: Fatal: failed to run the auto configuration service

  script gave:
  ****************************************************

  igccmprf.sh started at Wed Jan 28 03:27:44 CST 2014

  
  The environment settings are...

  ORACLE_HOME: /phdfci/oracle/phdfciora/8.0.6
  ORACLE_SID:
  TWO_TASK: PHDFCI
  Path: /phdfci/oracle/phdfciora/iAS/Apache/perl/bin:/phdfci/oracle/phdfciora/8.0.6/bin:/phdfci/oracle/phdfciappl/fnd/11.5.0/bin:/phdfci
  /Oracle/phdfciappl/ad/11.5.0/bin:/usr/java14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip::/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin
  : / usr/sbin: / phdfci/oracle/phdfcicomn/clone/bin /... /JRE/JRE/bin:/phdfci/Oracle/phdfciora/IAS/apache/perl/bin:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/ja
  VA14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14_64/bin:/usr/VAC/bi
  n: / usr/bin: / etc: / usr/sbin: / usr/ucb: / home/apchdfci/bin: / usr/bin / X 11: / sbin:
  LD_LIBRARY_PATH: /phdfci/oracle/phdfciora/8.0.6/network/jre11/lib/aix/native_threads:/phdfci/oracle/phdfciappl/cz/11.5.0/bin:/phdfci/oracle/phdfc
  IOra/8.0.6/lib:/usr/DT/lib:/usr/openwin/lib

  Executable: /phdfci/oracle/phdfciora/8.0.6/bin/sqlplus

  
  SQL * more: version 8.0.6.0.0 - Production on Tue Jan 28 03:27:45 2014

  (c) Copyright 1999 Oracle Corporation.  All rights reserved.

  Enter the value 1: enter the value 2: enter the value 3: enter the value of 4: connected.
  Cannot create a hold file.
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  igccmprf.sh out with status 1
  ERRORCODE = 1 ERRORCODE_END
  .end std out.
  The o/s message: no such file or directory

  .end err out.
  ****************************************************

  
  Product Top pilots executed: AD_TOP FND_TOP ICX_TOP IEO_TOP ABM_TOP ECX_TOP BIS_TOP GL_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL
  _TOP OKS_TOP CSF_TOP XNC_TOP IGS_TOP IBY_TOP PA_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP IMT_TOP FTE_TOP ONT_TOP HAS
  R_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP

  
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase.  Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >

  [INSTALLATION STAGE]
  AutoConfig could not successfully run the following scripts:
  Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
  adgendbc.sh INSTE8_SETUP 1

  afcpnode.sh INSTE8_SETUP 1
  txkWfClone.sh INSTALL_SETUP 1

  [PROFILE PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
  adadmprf.sh INSTE8_PRF 1
  afadmprf.sh INSTE8_PRF 1
  afcpgsm.sh INSTE8_PRF 1
  ahladmprf.sh INSTE8_PRF 1
  amscmprf.sh INSTE8_PRF 1
  aradmprf.sh INSTE8_PRF 1
  clnadmprf.sh INSTE8_PRF 1
  cnadmprf.sh INSTE8_PRF 1
  cncmprf.sh INSTE8_PRF 1
  csdadmprf.sh INSTE8_PRF 1
  cseadmprf.sh INSTE8_PRF 1
  csfagprf.sh INSTE8_PRF 1
  csiadmprf.sh INSTE8_PRF 1
  eamadmprf.sh INSTE8_PRF 1
  fteadmprf.sh INSTE8_PRF 1
  gladmprf.sh INSTE8_PRF 1
  igccmprf.sh INSTE8_PRF 1
  jtfadmprf.sh INSTE8_PRF 1
  okeadmprf.sh INSTE8_PRF 1
  okladmprf.sh INSTE8_PRF 1
  ontadmprf.sh INSTE8_PRF 1
  paadmprf.sh INSTE8_PRF 1
  txkJavaMailerCfg.sh INSTE8_PRF 1
  txkWebServicescfg.sh INSTE8_PRF 1
  wipadmprf.sh INSTE8_PRF 1
  wshadmprf.sh INSTE8_PRF 1
  xnccmprf.sh INSTE8_PRF 1

  [APPLY PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: / phdfci/oracle/phdfciora/iAS/Apache/perl/bin/perl-I /phdfci/oracle/phdfciora/iAS/Apache/perl/lib/5.00503-I/phdfci/oracle/phdfciora.
  iAS/Apache/perl/lib/site_perl/5.005-je /phdfci/oracle/phdfciappl/au/11.5.0/perl/phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
  adadmat.pl INSTE8_APPLY 1
  adupdlobs.pl INSTE8_APPLY 1

  
  Fate of 32 stateful auto-configuration

  RC-50014: Fatal: failed to run the auto configuration service

  Asked by oracle.apps.ad.clone.ApplyApplTop

  Env details-

  Apps 11i version

  Version of DB - 11.2.0.1

  Help, please.

  Thank you

  Thanks for the update.

  Problem is solved now.

  In fact, is copies on PROD that did not exist on the server to clone.