Satellite A210 series keyboard does not work properly

I recently bought a series of A210 with integrated cam and I have problems with the keyboard as when I start typing that he starts to jump all in different areas of the document or sentence is anyway to remedy, it is running windows vista and office 2007

Hello

This problem appears immediately after the purchase of the machine? Maybe it s a good idea to recover the machine, he might be a software problem.

On the other side it sounds a bit like a hardware related problem then if recovery doesn´t has you joy then you should contact a local service partner assistance.
Here you can find near the ASP in your country (just click on the link and you will find a few):

http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

Have a nice weekend
See you soon

Tags: Toshiba

Similar Questions

  • Satellite Pro C850 keyboard does not work properly and opens several programs

    My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

    is there a permanent solution to this problem?

    This is not something to do with installed programs is not something to do with the browser settings.
    restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

    > is there a permanent solution to this problem?

    The question is what causes this problem? Is it related hardware or software related issue?

    Why n t connect a USB keyboard just to check if the same would happen?

    In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.

  • Satellite Pro 6100 keyboard does not work properly after repairs

    Hello

    My 6100 Pro Sam just being away from usual mother board and power Board replacement with Toshiba, but now I have a strange keyboard problem.

    When I turn it on, all the keys are working. After a few minutes, '3' is not working, then 'r' fails, then '5', ' 7 ', ' 8',' 9 ', ' 0' to stop working. At this point, I can feel something very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with the internal keyboard and an external keyboard to the PS2 is still defective (some keys work, others do not), but the outer one works properly.

    Now, if the pc has not obtained if hot as the middle of the internal keyboard, then, I would conclude that the keyboard was defective, but for his failure, slowly and sequentially like this and it fails at the same way every day (since Toshiba rebuild it!).

    Perhaps, internal keyboard controller overheating?
    Anyone know what this could be? :-(

    See you soon,.
    Homer

    Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs on the same map). It is normal that this part become hot during use.

    It is strange that your problem appears after a while and not immediately.

    It could be just a bad relocation of the keyboard cable (it's a thin layer as a movie negative photo) which easily appears there, but... it may be something more serious, too. (Especially since you had done upgrade where the material had to be changed)

    I consult the service centre once more and ask for instructions how to deal with this. Do not ignore it (using an external keyboard instead of internal dysfunction) because he could end up in something more serious soon...

    Concerning

    chain

    P.S. Please keep us updated on your efforts

  • Re: Satellite L40 - 18Z - keyboard does not work properly

    I have Satellite L40 - 1BZ and only vowels will work when you try to open a session?

    I turn the laptop on and I tried to enter the password (using Vista home Premium) and it will just hit me the vowels and Caps lock?

    Help someone mention I could download the BIOS but I put t really know what I m doing.

    I imagine you have this L40 longer and it will be interesting to know since when you noticed this behavior strange keyboard.

  • Satellite L30-114 keyboard does not work properly

    Hello

    My Satellite L30-114 lost there head yesterday, he started typing 4 instead of the letter U, 5 instead of I have letter suddenly. I checked his English language page layout. No viruses were detected in my PC.

    How can I fix this weird problem - I can't type anything!

    Hello

    Just, without panic. There is no problem at all. Of course, you have accidentally enabled symbols that appear as small gray symbols to the part of the keyboard. If you look closely, you'll see paved digital buttons as U-4, I-5 and O-6. You can enable/disable this by using the FN + F11 key combination.

    Good bye

  • Satellite Pro A - keyboard does not work properly

    Hello

    I'm not able to use my arrow, also when I press SHIFT: I get a capital H and N: HN

    Very annoying, someone who might be able to help me.

    Thank you

    Rob

    Before you use this option, you must activate it with FN + F10 or F11. I put t remember which of these two key combinations is good. Please test.

    Generally, you will find instructions on this subject in s operating manuals.

  • Keyboard does not work properly

    Hello

    I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

    When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

    Thank you very much

    Tom

    Hi Tom

    Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
    Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

    I think the keyboard needs to be replaced to check if only this part is affected

  • My laptop HP keyboard does not work properly.

    My laptop HP keyboard does not work properly. First of all, it makes a clicking dull when I type, second if I type (anywhere) it wont let me repeat a letter or any key back to back with waiting 2 + seconds. It comes with the connected keyboard or a usb keyboard. How can I stop this?

    In the Panel-> Accessibility-> make your computer easier to use-> make the keyboard easier to use, check your filter keys, if it is on, turn it off.

  • Satellite L775 - mouse pad does not work properly

    I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

    What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

    What's past and how to fix this?

    Thank you very much.

    > What's past and how to fix this?
    After reading your ad, I still don t know what is your problem.
    > My mouse pad is not working properly
    How to understand this? What does not work properly? What happen exactly when you start your laptop?

  • Satellite Pro M10 - infrared does not work properly

    Hello

    I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click Troubleshoot to start the troubleshooter for this device.

    However, under Driver Details is said:
    C:\windows\system32\DRIVERS\smcirda.sys

    I extracted the zip file in my home directory of c:\downloads\infrared.
    whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

    Thanks in advance for any help.
    Chris

    Hello

    If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

  • Satellite M40X-189 - keyboard does not work - long beep consisten

    Hello world

    Thanks in advance for any help provided.
    I have a laptop Toshiba Satellite M40X-189.

    The problem is that the keyboard does not work, and it beeps long consistent. I have to press the keyboard for him to stop, when I get loaded in Windows, the touchpad is ok but I can't type anything with the keyboard. I checked the connection on the keyboard and it went ok.

    Is it possible that the computer tells me that the keyboard is down and replacing it will fix both problems?

    I don't want to spend money on a new keyboard for the same thing happen after installation.

    Anyone who can help me with this problem?

    Thanks again for any help provided.

    In my opinion it looks like a defective keyboard, and I think that a new keyboard to solve this problem.
    External keyboard works on your laptop?

    So in your case I would swap the keyboard.
    In addition, you can contact the nearest ASP and ask for help. Technicians can swap the keyboard for you and order a new one.

    Good luck!

  • Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

    I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

    The only key/button that works is the power button. The dvd/cd drive works.
    Help, please.

    The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

    Thank you

    And what kind of help do you expect now? What can we do?
    Why you n t fix it and be happy with the new keyboard?
    How long you want to use your laptop in such a State?

    Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

  • Equium M40X keyboard does not work properly

    I Equium M40X, but the keyboard does not work.
    I can not type anything with the keyboard. I reinstalled windows using the recovery CD but stil doesn't work.
    Please help me solve this problem.

    Sorry, but I think that the keyboard is dead and must be replaced. If you can get a new one let us know. Maybe someone can help you and explain how to share one keyboard.

    Good bye

  • Satellite L450D - 11G - keyboard does not work

    Yesterday my laptop had bad start up and when he did, saying driver error.

    Today I tried it and it turns on but the keyboard does not work.
    Any suggestions?

    >... it says driver error.
    Just or is driver error may be written which driver exactly?
    Start your laptop in SafeMode (F8 at startup) and check if the same keyboard problem occurs again.

    Be so kind and post comments.

  • Satellite 200-170-keyboard does not work and the keyboard stops working

    My U200-170 2.5 years, I have the following problem:

    When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

    Thank you

    AJAN

    Sounds like keyboard problem.
    The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
    But one thing is really strange; the yellow exclamation mark in Device Manager

    Eventually it s only a problem of software in such a case, a system restore can be useful...

    Have you checked if the keyboard works in the BIOS?
    Do this!

    If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

Maybe you are looking for

  • How to remove findr

    -Very well, so a month ago, I downloaded paint SAI. It was clearly a mistake, since now whenever I open a new tab in firefox, it goes immediately to findr, so now I can't restore my tabs, or move on it. I thought that download a manual session Manage

  • Safari - all websites are broken

    Each Web site is divided into weird and there's a picture of a robot broke behind every page.  Thoughts?

  • LJ Login cannot be used

    I just updated Firefox, and thanks to the shit, I can't use LJ Login. Is there a way to fix this? If this isn't the case, I'll downgrade.

  • No port COM - A30

    Due to an overheating problem, I reinstalled Windows XP. The Device manager now showes no port COM and the toshiba software modem give an error message when I try to use it. Please help;

  • With the help of the PIC16F84A in Multisim

    Is it possible to visualize outputs of the ports of the 16F84A or output to the Multisim? I tried to display the result of one of the sample files with the Logic Analyzer, but it wouldn't work. Thank you