Satellite A210: Synaptics TouchPad and the fn in Win 7 do not work

Similar Questions

• SYNAPTICS TOUCHPAD V6.2 ON PS/2 PORT3 DOES NOT WORK

  SYNAPTICS TOUCHPAD V6.2 ON PS/2 PORT3 DOES NOT WORK

  Hi SEXYKAP,

  O what is the number of brand and model of your laptop?

  ¯ What doesn't work exactly?

  Install the required driver should probably solve the problem.

  Download driver Synaptics on the support site of the manufacturer, and then install the downloaded.

  You can find the drivers here: http://www.synaptics.com/support/drivers

  For more help with updating drivers, see: update drivers: recommended links

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My office and the (quick launch) taskbar shortcuts do not work.

  Here is my problem
   
  My office and the (quick launch) taskbar shortcuts do not work.
   
  the paths of the target go program, but when I click on them
  they jump to the top of the "open with" box, select the application to open the file with.
  I went into the actual program .exe files, and they work very well, also if I chose the file .exe 'open with '.
   
  I have two user accounts on the computer, and this problem only occurs on one of them.
   
   
  If I right click on the IE icon and click on 'Properties' (internet) are said (in this popup box)
   
  [X] Control Panel
  'c:/windows/system32/rundll32.exe '.
  Application not found
   
  I went in this folder and that the file is there.
   
  have ran McAfee, so, nothing found.
   
  That is what it is?
   
  Thank you
  Steve M.
   
  fast response helps to:
  E-mail address is removed from the privacy *.
   
  BTW, my PC is a Dell Optiplex GX260
  without other problems (I see)

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work.

  Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work. Thanks for advice

  Commands > apply Source format.

  I use it so often, I created a shortcut to it.

  Nancy O.

• Satellite A210 - 16G (PSAELE) and the full support of Windows XP Home edition

  When Toshiba engineers starts to move and get value added package for Windows XP for models PSAELE? It is very difficult?

  Found all the drivers, but the keys (Fn + F1-12) do not work! You go there for support customers or and sit, while Microsoft pays money for its Vista crap?

  1 year I'm waiting for the package of drivers and utilities full XP for my A210 - 16G?, but he did not communicate!

  I ask the support of customers instead of Vista support!

  Oh, moderators work faster then toshiba laptop support =)))

  Seems that Windows XP drivers are not out on the Satellite A210 - 16G (PSAELE) series.
  Why? Who knows, but always is he that the XP tools that control the functionality of the FN are not available especially for the A210 PSAELE

  Then you can try to install the tools available for other series with your own hands and hopefully they will work. Sorry, but that's all you can do

• Satellite A210 - Synaptics touchpad Dual loses the function

  Hello

  I have a Satellite A210, its old now about 3 months.
  At first when I typed in the upper right of this mouse pad, it turned a bright blue color and I could use it to control the volume and open up to 6 zones with one touch.

  However during the last couple of months, without apparent reason, it doesn't work anymore, all I can do with him now is tap in the top right to enlarge a window and click at the bottom left of the minimize a window.

  Anyone can help to explain why this is?
  Any help would be greatly appreciated that its very frustrating.

  Thank you

  Hello

  These questions are not possible explain because nobody here knows what you've done with your laptop. As a quick fix, you can try to restore your operating system to an earlier time using System Restore tool.

  Try it. Maybe it will work again. Please inform us of the results.

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• Satellite A210, XP downgrade and the failure of the Ethernet

  I have a laptop Toshiba A210 8 months old and recently downgraded from Vista to XP. Then, I found that although I could connect to my wireless LAN I continually a "cable disconnected" error message when I tried an Ethernet connection. This topic has worked well for Vista.

  I have a Realtek 8139 network card. I've updated the Toshiba BIOS and all drivers card NETWORK (Toshiba and Microsoft). I can connect to the local network at the shop I bought this computer to, but not at home, or the shop where I buy my desktops, and service had installed XP downgrade. I tried all the connections on my home LAN, which otherwise works fine for my desktop PC, my PS3 and my XBox 360. I have a Netgear router.

  Suggestions as to what the problem might be, or even better a solution?

  Doug

  > I can connect on the local network to the shop I bought this computer to, but not at home

  You mean that your laptop can be successfully connected to LAN in the shop, but not at home
  Well, to me this looks like a problem of compatibility in connection with your router.

  To be honest, I also installed Win XP on my A210 but the LAN works without problems WLan and LAN-> no problem.

  Maybe you need to update the firmware on routers and but in addition, I recommend that you check for updates to Windows XP and update the LAN driver too

• HP pavilion followed bsod to black screen and the start program menu f10 does not work

  Hello

  Come play a game on my pc when a BSOD pops up... then in a few seconds my pc stops and starts again. But now I'm stuck in a black screen: a disk error occurred press ctrl alt del to restart. When I do, I'm back to the blue screen (the screen where you can choose to go to recovery, configuration and startup menu). The f10 key recovery does not, others do it... What can I do? Im not happy to lose all my documents but if not the end of the world because I have an external drive with the most important things about it. I don't have a recovery cd... I hope someone can help me because I can't find answers on the internet...

  I can't find the type of pc but its old I guess from a pavilion of 87... cannot seek in the pc for the exact number.

  Thank you!

  I bought a new PC...

• After upgrading to bold9900 blackBerry smartphones and the last appworld - myworld icon does not work - cannot download applications

  Hello anyone out there. ?

  I'm looking for technical help, on this forum, I have

  having read the many problems however few answers...

  I can connect to 'my world' only on the bb site and see my account, but since I had the

  new bold9900, in the new appworld, the myworld "icon" after clicking, the Green wheel turns

  to always say "Please wait..."  I did everything the Office tech rogers said, re - install appworld,

  Take out the battery, switch radio 2G, then try to reinstall the appworld.  Seems to be a clitch software!

  The only apps I have are the apps that I got from my old phone, which transferred the BB

  Desktop software.

  Help!

  The 9900 is only "rst", not "34(".) ".

  Article ID: KB24714 How to clear the cache of BlackBerry App World

• the spell checker button is dimmed and the fate that you write does not work either. I'll have to use microsoft word, then copy / paste.

  See the question

  Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.

• Synaptics Touchpad and Pointing Device Driver missing on Satellite A200?

  Hey,.

  I received a notification of upgrade on the touchpad synaptics installed on my laptop A200 - 1 m 4 and after I installed that the touchpad respond well, so I rolled back the driver, but he wouldn't use the scroll option. I reinstalled the driver again, but still I couldn't use the scroll function.

  On the icon in the taskbar, when I want to see the chart pressue accessory it gives me this msg * sorry, this program requires a Synaptics TouchPad, and the Synaptics pointing Device Driver * I miss him the 2nd can't so anyone made me know where I can find the installer for it.

  Thank you very much in advance,
  LEEN

  Hello

  Satellite A200 - 1 M 4 belongs to the series of PSAE0E and you choose this serial number for a driver download.

  On the European driver Toshiba page you will find the * Alps Electric Touch Pad driver *. (This driver allows you to set the properties and functions of mouse control) and
  the * Synaptics Touchpad driver * (this driver allows you to set the properties and the touch pad control functions).

  Both must be installed!

  If that doesn't help then try to roll back the BONE to this early time (until you've updated the driver for the first time)

  Good bye

• Satellite A210 - must always repair the network connection

  My wireless works sometimes, but when he decides that I can connect to the internet to fix this happens every time I turn on my laptop!

  But sometimes it won't let me fix it because it was not connected to a network making me restart my laptop.

  It is a Satellite A210-19 t and using Vista if it helps!

  Can anyone give any suggestions on how to solve this problem?

  I would recommend you to do a BIOS and driver update.
  You have this problem with the WIFI connection, connect to the local network or both?

  To check for updates from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• How can satellite A210-15Y - I upgrade the firmware of the DVD drive?

  Hello

  I want to update the firmware of my DVD RW. It is TO01 and I updated TO03.
  Is TSSTcorp CDDVDW TS - L632H (TO01).

  I have download the .zip on the Toshiba site and extract. I run TSL632H_TO03.exe
  and it appeared an autorun.bin file in the same directory.

  What to do with this .bin file? When I doubleclick it, a dialog box appears to show the program
  for .bin files to run. Why is this? I don't have any program to .bin files. The content
  File PDF of firmware does not say something special to update the firmware, just for
  run the .exe.

  I am running the operating system Vista Home Premium 32 - bit that came with the notebook.

  Kind regards
  Nebojsa

  Hello!

  I think that there is a problem with the file that you downloaded.

  I checked the page of European Toshiba for Satellite A210 driver download and I can't find the TO03 firmware. I downloaded the zip file and zip in this file is a readme file and another zip file which contains an exe file that you need to start only.

  Maybe you need to download the file again. I can't find a .bat file in the archive. ?:|

  Good bye

• Satellite A210 - 11 p and Radeon 2600HD replacement

  Hello world

  I "did a search on this topic but don't find any results, so why shaped not only ask you my question friendly people.

  I just bought the laptop Satellite A210 - 11 p and I'm very happy with it, but one thing I'm unsure of is the graphics card.

  I have the Radeon 2600HD and his performance is very good, but I heard somewhere that it is a dedicated and non-integrated gpu.
  Would it mean that in the future I could replace the 2600 with something better or I'm stuck with it forever?

  http://I25.Tinypic.com/w6t8bb.jpg

  Thanks in advance.

  .

  Please don t mix the laptop and desktop PC technology.
  Laptops cannot be upgraded as desktop computers.

  All you can do is upgrade the memory and the HARD drive.
  The replacement of the graphics card is not possible.

  The GPU is soldered and fixed on the map and you can not delete it!