Satellite A210 - system crashes and restarts for 3D applications

Hello

I can play games like Americas Army, stalker or gothic 3, but they break after awhile. Although I put the graphic details low my laptop heats up and the system stops and restarts. I had one laptop Satellite A210-128 PSAELE, graphics ATI 2600hd, Windows Vista 32-bit with SP1. Also the latest BIOS and graphics to date on the Toshiba site. DirectX 10 installed.
pcdiag test is successful.

I hope someone can help me with my problem.

Chris

error message:

Problemereignisname: BlueScreen
Betriebsystemversion: 6.0.6001.2.1.0.768.3
Gebietsschema-ID: 1031

BCCode: 116
BCP1: B6A5B510
BCP2: BE827B5A
BCP3: 00000000
BCP4: 0000000D
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Hello

Please check if there is a temperature higher during the games.
I got a BSOD while gaming by using the A210 in bed.
The fans couldn't t work properly because the vents were clogged!

Now, I use this laptop ONLY on the table and I have enough free space around the laptop.
Furthermore, I cleaned the fans using a jet of compressed air.

Now I put t receive any BSOD error and games is ok.

Tags: Toshiba

Similar Questions

  • Satellite U500 - system crashes and Sreeching noise

    Hello

    I use a u500 - 1DR... I recently encountered this problem

    The system hangs, and the speaker issued a loud noise... I have to restart the system... after I rebooted, I get a message in the system tray area saying "technology service intel rapidsahre does not work..."

    Have you noticed this behavior from the first day?
    Have you tried to reinstall the OS using HARD drive recovery option to see if these problems persist with the factory settings?

  • Satellite A500 - crashes and restarts when I play games

    Help, please

    For these last months, I had a problem with my laptop crashing and restarting in 10-20 minutes from a game.

    Please help, give me ideas or tell me how to find out what the problem is, I have read a few other discussions to talk about questions of heat but no real answer on how to solve the problem.

    Help, please
    Thank you
    D

    Hi Dale.Johnston,

    Overheating would be a typical pattern of this behavior. I mean, that's if the laptop has a higher internal temperature and it will immediately fit to protect the equipment. Then it the normal behavior of s from overheating.

    Overheating may have different reasons. In most cases it's dust that blocks the fan. This would mean that you have to clean the cooling system of your laptop using the jet of compressed air to blow the dust from the cooling fans.

    Generally, it should help. If this isn't the case, I would check the display driver. What display driver and operating system you are using?
    If you install the display driver Toshiba not they can also cause overheating if it recommendable s using Toshiba pretested drivers only. ;)

  • I've upgraded to Vista XP, the system crashed and now it says to install the disc so that it can be fixed. He doesn't like XP or Vista disc. How to get a copy of the Vista disk (and not an upgrade) my computer can run.

    my vista system crashed and now it asks me for my vista drive.  He doesn't like my drive to upgrade to vista, says that my XP system drive does not work either.  where I kenza a copy of vista disc that works?

    To reinstall Vista:

    You can not legally do a clean install of Vista with a Vista Upgrade disk/license.

    Reinstall XP > then go to Vista.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Here's a startup repair disk, you can do:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Guard Windows Explorer to crash and restart on Windows 7

    I use a Dell Vostro V13 laptop. Last night suddenly kept windows Explorer crashing and restarting over and over to the point where I can't do anything. I tried the system restore, but the problem is still there. I can't do anything except the exit ramp of the computer with Ctrl + alt + delete. As soon as the restart my laptop the message back and he stops and restarts over and over again.

    I am only able to send this message in SafeMode where the problem occurs.
    I'm not very computer literate, so would be grateful for a detailed step by step help.
    (One of the reasons could be that I tried to update media player VLC, this accident occurred just after that.) I uninstalled VLC but with no avail, explore it crash)

    It is clear the details of the second error problem is the DivXMFSource.dll:

    Fault Module name: DivXMFSource.dll

    Fault Module Version: 1.0.0.72

    Timestamp of Module error: 4cffcf66

    The DivXMFSource.dll is a component of DivX software.

    Uninstall of DivX software should fix the error.

    You are able to do safe mode?

    If not go to the DivX program folder and right-click the DivXMFSource.dll and rename the extension .dll to .old, IE rename DivXMFSource.dll in DivXMFSource.old.

    Restart the computer in Normal Mode and uninstall DivX.

    Here is the location of the DivXMFSource.dll to rename:

    If 64-bit Windows 7:

    C:\Program Files (x 86) \DivX\DivX DivX Media Foundation Components\DivXMFSource.dll

    If 32-bit Windows:

    C:\Program DivX DivX and Media Foundation Components\DivXMFSource.dll

  • What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

    What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

    It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund if you can.

    Find my iPhone Activation Lock

    Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

    Find my iPhone Activation Lock

    Find my iPhone Activation Lock - remove a device from the account of the previous owner

  • My system crashed and I got this message "c\windows\system32\nvcpl.dll - a dynamic link (dll) library initialization routine failed.

    Original title: c\windows\system32\nvcpl.dll

    My system crashed and somehow, I was able to find it. c\windows\system32\nvcpl.dll - a library (dll) dynamic link initialization routine failed. Complete reinstallation of my netbook, it worked for 1 day and then resurfaced. Then it happened to my office. I can't get into my netbook to solve it without a complete reinstall, and if it works only for 1 day again then it's a waste of time. Help, please.

    Hello
     
    'c:\windows\system32\nvcpl.dll' is the NVIDIA Display Properties Extension.
    I suggest that you follow these steps and check to see if they help.
    Step 1:
    Start your computer in safe mode and check if you get the error.
     
    Step 2:
     
    a. your video card drivers probably needs to be reinstalled. Visit the manufacturer of the laptop computer support Web site to download the correct adapter for your specific model of laptop drivers.
    b. obtain the latest driver for the chipset and update the BIOS as well.

    Warning of the BIOS:
    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
     
    Step 3:
     
    Before installing, uninstall the old drivers.
     
    a. click on start
    b. Control Panel,
    c. open the applet, add / remove programs
    and look for your video drivers uninstall.
     
    Step 4:
     
    After you install a new set of drivers.
     
    a. right-click on your desktop and select Properties
    b. click settings, change the color quality "highest (32 bit), then adjust the resolution of your screen to your liking, then click on apply.»
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • My computer crashes and restarts with windows xp but it does not occur with any other OS

    When I use windows XP, 2000, ME, 98 in my computer (Dell latitude D600) it crashes and restarts all of a sudden. But when I installed winodws vista, 7 or ubuntu it will never happen. I thought that the problem could be drivers, so I ran my computer only with windows XP, without installing any driver, but it happens again. I already send my computer to dell and they changed everything in the computer, but I still get the error. What can I do to identify and solve the problem?

    Hello cocodrilo,.

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP, 2000, ME, 98 multiboot and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/categories/

    Thank you

    Jack

    Jack
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Explorer Windows 7 keeps crashing and restarting and it doesn't recognize me as an administrator

    Hello!

    I share the same problems as many users posted, then some a few years ago.

    1 Windows 7 explore keeps crashing and restarting

    a. I've done your first suggestion witch was copy Explorer. exe in system32. Does this rebooted and the problem continued.
    b. began to gain in SafeMode (same problem) and then all the stages of boot minimum troubleshooting to find the root cause of the problem.

    None of those who have worked, and I still have the same problem. So I tried commandprompt and running "sfc/scannow". Then came the following problem:

    2. I need an administrative authorization.  (I'm the owner of the computer and work through an administrative account).  How can I get Windows to recognize me as an administrator?

    Thanks in advance for your help

    Best regards

    Liliana

    None of those who have worked, and I still have the same problem. So I tried commandprompt and running "sfc/scannow". Then came the following problem:

    2. I need an administrative authorization.  (I'm the owner of the computer and work through an administrative account).  How can I get Windows to recognize me as an administrator?

    Hello

    You must run the shell in high mode (Administrator).

    Click on start / all programs / accessories.

    Right-click on the command prompt, and then select the run as Administrator option.

    Run SFC/scannow in the command window.

    Concerning

  • Windows 7 Windows Explorer keeps crashing and restarting every 10 seconds.

    I have a problem with the Windows Explorer. It keeps crashing and restarting every 10 seconds as soon as windows loads. I got in safe mode, and this error does so. My computer is free from virus/spyware etc...

    Thank you for your support in advance. I need to solve this problem quickly, I would appreciate your help.

    I have Windows Home Premium 64 bit

    4 GB OF RAM

    2.4 GHz

    NVidia GeForce GT 320M

    Thank you for your help, but I tried something else. What you suggested, it was too complicated for me :) I restored Windows 7 to the point before the problem started (which was a recent Java Update December 26) and even if he says that restoration could not be complete, it seems to be invalid the latest version of Sun Java and Windows Explorer now works as it is supposed to.

    I have a new question now, if update SunJava caused my windows Explorer keep crashing how can I keep the java software to install this update again? Thanks a lot for your help.

  • system stops and restarts as soon as I click on adobe icon pro first

    My system stops and restarts as soon as I click the icon of Adobe Premiere pro. I also spent off some of the Visual effects in the Performance information and tools in Control Panel. Although I already understood how to stop my system to reboot automatically, but still my system freezes when I click on the icon.

    Care of my system are-

    Intel core i7 4770

    8 GB ram

    Windows7 ultimate 64-bit

    ZOTAC Nvidia Geforce Gtx 650

    Well, thank you very much for your help, but he has already begun to work idk how...

  • iPad Air keeps crashing and restarting

    Why my iPad Air keep crashing and restarting in Safari? I also think other applications. iOS 9.3.2 must be the culprit because it never happened so often. Any solution?

    Go to settings - Safari - clear the history and data from the Web site.

    If that doesn't work, reset your device. This will not erase your data stored on the phone.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Driver satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit

    Hello, I need driver Toshiba Satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit. If you have the installation file, please redirect me if you have any other file, please explain to me where to install it.

    If I were you I would take a look at the site to download the drivers from the main Toshiba page, because you will find everything you need.
    The mass storage controller can be the HARD drive controller or the controller of the SD card. I want to download both of them.

    Here´s a direct page link drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Welcome them

  • Satellite A210 - 11 p and Radeon 2600HD replacement

    Hello world

    I "did a search on this topic but don't find any results, so why shaped not only ask you my question friendly people.

    I just bought the laptop Satellite A210 - 11 p and I'm very happy with it, but one thing I'm unsure of is the graphics card.

    I have the Radeon 2600HD and his performance is very good, but I heard somewhere that it is a dedicated and non-integrated gpu.
    Would it mean that in the future I could replace the 2600 with something better or I'm stuck with it forever?

    http://I25.Tinypic.com/w6t8bb.jpg

    Thanks in advance.

    .

    Please don t mix the laptop and desktop PC technology.
    Laptops cannot be upgraded as desktop computers.

    All you can do is upgrade the memory and the HARD drive.
    The replacement of the graphics card is not possible.

    The GPU is soldered and fixed on the map and you can not delete it!

  • How can I change the privileges of sharing and permission for certain applications and software?

    I need to change the permissions and settings for sharing applications. I find the custom preferences not defined by myself as well as many of those who are don't give me "read and write" access for them. When I go to "get info" to change these settings, it says I don't have permission to make changes. How can I solve this problem and make sure that it doesn't happen?

    Nothing should write an application, so I don't know why there is a problem.

    Protection of the integrity of system (SIP) in El Capitan prevents you from changing all the apps.

    For preinstalled applications, the system must have a reading and writing and group / everyone should be read-only.

    They will also have an access control entry, "group: everyone denies delete" which will appear as usual in the window read the information.

    Install apps via drag and drop, you will probably have as owner with Read and Write, but the other group is going to be read-only.

Maybe you are looking for