Satellite A210 - update the Firmware is not compatible

Similar Questions

• Satellite C670 - update the firmware on the CD-Rom drive

  Hello!

  I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
  Please tell me where I can get the update.

  Features dvd / cd-rom:

  DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

  Version: 6.1.7601.17514
  class CD-ROM
  Manufacturer: "Standard CD-ROM drives"
  OS: Windows 7 64-bit

  Please to help.

  Greetings

  You can update the firmware ONLY if the most recent version has been released for this drive.

  There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But for * TS-L633A * there is NO firmware update available.

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• Satellite A210 - update the BIOS didn't

  Hello

  Just tried to update the BIOS on my Equium A210, everything went well until the closing and restarting (which failed).
  He left me with a black screen and an orange to power lights, no back to zero and I only can we get rid of the orange light if I remove the battery.
  OK, what I'm doing now?... is this repairable?

  See you soon

  > OK, what do I do now?... is this repairable?
  Yes and no.

  You can't fix this, but the ASP technician can do that.
  Therefore, you will need to contact the ASP in your country, to solve this
  The technician would be able to Flash the ROM module and I think this should help you.

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• Equium A210: "tsst corp ts-l632h" firmware is not compatible with my drive

  Last year I had an Equium A210 17l of pc world. I recently bought some dvd - r tdk discs and the drive cannot read them. It's as if there is no disk in the drive.
  So I thought I'd hunt around to see if there is updated firmware for the drive. I downloaded the firmware from this site, but when I try to update it says that the disc is not compatible! Evey bit of software I said the player is a * tsst corp cddvdw ts-l632h * with firmware to01.

  The firmware I'm trying to download is [this | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 382 & selSeries = 173 & selProduct = 742 & STAS hortMod = 680 & language = 13 & selOS = 26 & selType = 50 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = 8 & electedLanguage s = 13 & type = 50 & page = 1 & ID = 63137 & DISO =-1 & driverLanguage = 42]

  But whenever I try to run it it says that it is not compatible with my drive! What is going on?

  Jim Venner

  I recommend you to first install the 2 firmware until the you´re trying to upgrade the drive with the a3 because it is possible that the a3 requires the 2.

  Please visit the site to download drivers, download the firmware 2 and check if it works.
  Would appreciate any comments on your part.

  Welcome them

• I tried firefox update, but it is not compatible with leopard op. If I try to re - install the old version my favorites will always be there?

  I tried firefox update, but it is not compatible with leopard op. If I try to re - install the old version my favorites will always be there?

  Yes. This should not be a problem.

• Gigashot K40HE - update the firmware on the SD card does not work

  Hello

  IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

  I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
  1. prepare a formatted, empty SD card.
  2. Insert an SD card to the card reader. Copy the firmware file
  (file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
  3. Insert the SD card into the DV.
  4. Insert the battery in the DV.
  5. Insert the adapter in the DV. (dual power supply)
  {color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
  and press 'OK '. The DV will update automatically the FW. {color}
  7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

  Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

  I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

  Has anyone an idea to help me sort this out?

  Best regards
  Ozhades

  Hello ozhades,

  before you start an update of the firmware, it is very important the battery completely full.

  After the battery is fully charged please do the fw update again.

  Best regards

• Satellite Pro A200 (PSAE7): failed to update the firmware Vista

  Hello

  I tried tp update the firmware of my HD-DVD player with new firmware TO35 (SD-L802B), but it is not possible. The upgrade of this Winvup button is not selectable. I had the same problem with an older firmware, but I just thought that it was because the firmware is up-to-date (book is 1 month old).

  Winvup shows my drive as "TOSHIBA DVGW/HD SD-L802B TO01 (26/10/07). The discription of To35 said, he needs a version of TO33 or T034, that is the problem?

  I got this firmware update form [link firmware: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes & action = search & teddProduct = 737]
  so, it should be the right one.

  So what can I do to upgrade my drive? Watching a HD DVD is not possible :(

  THX,
  Holger

  It is not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page deigned for the TS-L802A drive.
  Do not mix these two discs! It is not the same thing!

  I found this site on the engraver of DVD Super-Multi SD-L802B
  http://www.storage.Toshiba.EU/index.php?id=3&PID=221

  But according to this page, the firmware is not available for this driver (at this time?  :|)

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• I updated the firmware of my as30v and now it does not work

  It's my problem.
  In my computer, the update was completed suceffully, but then my actioncam it does not work.
  I removed the battery and nothing to do.
  The screen is off and the rec light still works.
  No information on the screen, no response. I tried to remove the time of one and an another battery. The red light is still in mode on. If I connect with the computer, nothing happened.

  Died?, but why!

  Your device is in integrated security mode / download.

  Go through the process of updating the firmware again. What operating system do you use?

  Repeat and follow this guide:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=HDRAS30V&upd_id=9893&os_group_id=23

• I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

  I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  You posted your question in the AVG Free Forum? -Online http://forums.avg.com/ 
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• M4345 will not update the firmware

  One of my clients has 5 M4345 mfp.  The most recent, built around 2010, will accept the 48.306.1 firmware update.  The older models (which have parallel ports, not the USB ports) are at the level of the firmware 20050607 09.022.3 and will not accept the upgrade.  Using the lpt1 port, I managed FTP'd and copied the file from the rfu.  The ACM indicates it is the upgrade, then restarts, but the firmware is not updated.  I also tried the Utility.exe through the lpt1 port.  Yet once the ACM indicates it is the upgrade and that it recharges, but firmware is the same.

  Bottom line, I'm trying to get rid of the question of OpenSSL.  Any help will be appreciated.

  There are two different models of the 4345. The first was just a plain 4345 and the second was the M4345. The firmware is different between the 2 models. The link below is the firmware for the old model.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=415209&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dds_73628_15%257CswEnvOID%253D54%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Satellite A500 - video/dvd player is not compatible with Windows 10

  After having recently updated of my laptop for windows 10 I discovered that the dvd player does not work. A message is displayed informing that the player is not compatible with this version of windows. A scan using Norton suggests dvd will not work because it needs to be configured.

  Does anyone else have this problem?

  Obviously, Toshiba DVD playback application that is preinstalled on this Satellite A500 model is not compatible with the system Windows 10.

  In this case this software will not properly work after the upgrade to win 10 and I guess you have to remove the system Win 10.

  Unfortunately, the Satellite A500 is not listed as Win 10 portable computers and so I don't think you will get an update to this software for DVD playback.

  Here is a list of models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG