Satellite A215-S7444 - name of the low frequency amplifier

Similar Questions

• Satellite A215-S7444 - freezes after Hibernation mode

  I have a Satellite A215-S7444 which is 2 years. It came with a 32-bit version of Vista. I just do a custom install of Windows7 64 bit. It seems that after coming out of standby the laptop hangs and I have to do a hard reboot.

  Any suggestions would be greatly appreciated. Thanx.

  Hello

  Do you have also installed all the drivers for your laptop from the Web from Toshiba site? Make sure that there is no yellow exclamation point in Device Manager.

  In addition, I would try to update the BIOS. You should find it here:
  http://www.CSD.Toshiba.com > download

  Before the BIOS update, close all running programs and make sure that you are logged on as administrator.

• CPU fan broke on Satellite A215-S7444

  Hello

  My Satellite A215-S7444 CPU fan stopped working which causes my CPU become very hot.

  After 5 minutes of idle my laptop turns off which makes it almost useless to my laptop.
  After reading a few forums, I decided to disassemble my laptop to check that there is no dust or debris obstructing the fan.
  However, I got so far as to take off the keyboard because I didn't know how to take off the high black/silver (please link to image).

  http://I201.Photobucket.com/albums/aa287/istanlfc_album/laptop.jpg

  Could someone please help me with this problem, I use on a daily basis of the laptop and it is important for my studies.
  I don't mind it sends out of Toshiba for repair cost.

  Jin

  Perhaps, you will find it useful:

  http://www.irisvista.com/tech/

  Be careful to disassemble the laptop, there may be hidden media

• Re: Satellite A215-S7444 just stops after an hour of use

  I have a satellite A215-S7444.
  My problem is that if I'm on the computer after about an hour or two the computer just stops.
  I already tried to change the power settings management that worked for awhile, but my laptop still turns off after a while.

  Hi Patrick

  I'm quite sure that your laptop stops automatically due to the temperature inside the laptop.
  It of a simply overheating issue that could be caused by clogged cooling grids.

  From time to time it s a good idea to clean the fans. Especially dust prevents the cooling modules works correctly, and therefore the temperature rises.

  I made good experiences with the jet of compressed air. These sprays can be purchased from dealers of computer/laptop.
  In addition you could try to google for some online also offers.

  Good bye

• Webcam Chicony USB 2.0 on Satellite A215-S7444 - problem solved

  This is my system summary:
  Name of the operating system Microsoft Windows Vista Home Premium
  Version 6.0.6000 Build 6000
  Satellite A215 system model
  System Type X 86-based PC
  Processor AMD Turion (TM) 64 X 2 2 logical processors, 2 Lossnay, 1900 Mhz, technology Mobile TL-58
  BIOS Version/Date Phoenix Technologies LTD. 1.70, 22/02/08
  SMBIOS Version 2.4

  The solution is:

  1 - Download the latest Camera Utility for Windows Vista (v6.2.208.424, 31/08/2007; 24.48 M) for toshiba

  2 uninstall the old and install a new

  3. for sure restart after uninstall and restart after installation

  4 - Download the Chicony USB 2.0 from this link http://dlsvr01.asus.com/pub/ASUS/nb/A8E/CAMERA_Chicony_CNF6039_VISTA_070626.zip

  5 - once the download is complete, extract the files

  6 - right click computer, properties = Device Manager = ricght under imaging devices click Chicony = update driver software

  7. after the software update of the driver is loaded, click Browse my computer for driver software then let me pick from a list of... u will see the list of compatible hardware
  Click video device usb then I drive u will locate the extracted directory and you will see two model click on USB 2.0 1 3 m UVC Webcam u you will get a message install this driver is not recommended... Press Yes and wait until your driver is intalled. Restart your system

  8. the Camera Assistant Software will load but it will tell you that you need to plug the cam or reinstall landing don't be afraid press ok

  9 - the device will now work with msn, but it won't work with the Camera Wizard Software

  10 - right click computer, properties = Device Manager = ricght under imaging devices click Chicony = update driver software

  11. after the software update of the driver is loaded, click search automatically for updated driver software will load you the driver online and it will install it for you

  12 - reboot your system that will operate the Camera Assistant Software and Msn messenger works

  Great instruction thank you much!

• Satellite A215-S7428 crashes when the program tries to access the microphone

  When I plug in my microphone in my open mic port a program that uses a microphone, as recorder of sounds, my computer becomes unresponcive, frozen. The only way to put an end to this, is to shut down my PC. I tried this on many different programs and all do not work. It's a Satellite A215-S7428.

  How can I solve this problem? Does anyone know the email for toshiba computer support. My phone does not work. How can I determine the manufacter of the soundcard, I know that toshiba only computer assemblies, they do not have their parts.

  You can see the sound chip of brand / model in Device Manager under sound, video, game controllers

  uninstall the sound utility and driver control panel and install the latest version from the Toshiba Driver download site.

  Also update the BIOS.

• Satellite A215-S7422 - cannot run the recovery disc - model corrupt system?

  When you try to run reinstall on my Satellite A215-S7422 drive, the installer won't work, telling me that "this CD is for Satellite A210 A215 Satellite. Please use good CD.

  When I run the information system, it identifies the model of my system a string as gibberish in the sense of: ' t.o &.

  He could not work because of this? Is there a work around? How can I give a valid system model?

  g

  Hello

  I have heard on a question as when the DMI information is missing or damaged. You can read about it in similar topics.

  In any case, I think this happens when the motherboard was exchanged and the service center I forgot to update the DMI information on motherboard. If the computer model isn't recognized properly.

  You should contact Toshiba service center. Guys can update DMI information and help you solve the problem. :)

• HP pavilion touchsmart 14: Audio works, but now the low frequencies or lower

  Hi, Ive had this laptop for a while now and a few months ago, that the audio was working fine when I was producing my music, I plugged my microphone, guitar wheel, I even put in place a new maschine micro mk2 and he worked well with low latency. I'm not changing the latency and a few weeks after leaving my computer sit, I'm back and tried to go on soundcloud and audio did not work well. The audio was released, but it was as if the bass had been manually disabled. I have preveously owned a macbook so if you could please clarify and explain how to solve the problem or what is happening, that would be greatly appreciated.

  Hey there @basssgod,

  Welcome to the HP support community where you can ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP's Support and wanted to reach out and help with the sound issue that you are experiencing. If you perform these troubleshooting steps, it can help you recover the sound quality.

  Please note: remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a document titled No. sound from speakers. I know that you can hear sound from your speakers, but you mentioned that the bass sounds as it disappeared. I have provided this document for you because there are steps that can help you to get the sound working properly troubleshooting.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window (this also will give you subwoofer settings)
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  If none of these options is right for you, you can do a System Restore. System Restore helps you go back to a time when it worked correctly for you.

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Please follow these troubleshooting steps, re-post and let me know how everything went. Also, could you please provide me with your model number (How can I find my model number or product number?).

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Please consider tagging the post in order to resolve your problem as "Accept as Solution" to help other members of the community! To show recognition for my efforts please click the Thumbs Up below

  Thank you!

  Have a great day!

• Satellite T130 - turns off because the low power

  My 130 just turns off without notice because of the low power, but it shows remaining 40-50% power bfore, it turns off. What is wrong with him?

  Also there is no warning of low power, it just turns off. Any ideas?

  Hello

  That s really strange and I've never heard of this problem...

  You use a Toshiba original AC/DC adapter?
  Have you checked the Web from Toshiba website for updates to the BIOS?
  Have you tested the same with OS preinstalled Toshiba?

• Satellite M60-184: name of the drive from DVD-RAM CD d: D: change

  Hello
  I have a Satellite M60-184, I have problems with the DVD player, sometimes changing the icon, there name of DVD-RAM to CD drive D: drive, then it is not able to read any cd or dvd, until I have restart windows. Someone told me that I had to update the BIOS, but it didn't work.
  can someone help me?
  Thank you very much

  Francisco

  Hello

  The name, I guess the route because of the media that has been placed in change.
  If the DVD is inserted so that the player goes to DVD D: and the CD has been inserted so the disc change CD d:
  If the player doesn't work properly, so try to remove it from the Device Manager.
  After again starting the operating system should recognize the drive again. Maybe it helps.

• Fan always on with new Satellite A100-153, even on the low-energy setting

  Hello
  I just got a new A100. Its processor is a Centrino Duo.
  I am very surprised by the general noise of the machine. I had a front M30 including fan rarely provided on but on this new machine, the fan stops.
  I changed the power settings (proc low speed + low cooling method) but that doesn't change anything.
  The CPU is only 2 or 3% and I am working not all heavy duty applications, so this should not happen.

  What is your experience with the series A100 and the Centrino Dual Core in general?

  Is that what I can do to fix this problem or am I condemned to hear this stupid fan 24/7?

  Hello

  It is not easy to say why the fans run constantly.
  This problem occurs on new recovered BONES?
  In addition check you the version of the BIOS. If the most recent BIOS is available on the Web from Toshiba page so try to update. But I'm not 100% sure if it will solve the problem of fan.

• Satellite A215-S7414 - cannot open the control panel

  I'm trying to get the dial upward through the phone line, but cannot access control panel. The screen acts like he wants to come but soon left out.

  The laptop itself is a battlefield. I have to disable the player application to Windows loading. I can't access Windows on my administrative journal to and instead go through another user, I created to manufacture and store music. Start menu opens, but most / all Windows clients will not open.

  I remember 'cleaning up' in the Panel of control for more than a year, I don't remember when the last time was that I could get into the controls. Any help on how get opened would be gladly appreciated.

  Hello

  To be honest I have never heard of these problems but theoretically, it could be a virus or something else or your Windows installation is damaged, who knows?

  Do you have an AntiVirus tool? So, I can recommend the AntiVir freeware tool. It s small and fast and I have pretty good experience with it.
  Check this box!

  The problem persists there for a few days? If so, you can try a system restore to an earlier point. :)

• Satellite A215-S7444 integrated webcam works only with MSN / Skype

  Hi, I just bought my laptop computer and just after installing the new MSN and Skype, the video does not work with these programs. I tried to configure the video settings in MSN and he told me that "windows cannot connect to this webcam. It is currently in use or not plugged in." The webcam is integrated, a Chicony USB 2.0.

  Any tips?

  Hello

  I found your webcam question and I think I have a solution.
  In this thread, the user beret83 has posted a useful info:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26332

  It s interesting to know if it will solve your problem of webcam.

• Satellite A215-7422 - restore DVD gives the error "03-EEEE-0000" 'press 'OK' to restart.

  Hi all!

  I'm trying to restore my Toshiba A215 in the way that it comes from the factory, because I messed with it so that it is not worth of clean install myself if I want to do a clean install of Vista original.

  But for some reason when I booted from the DVD and then chose the "Restore Wizard" or what ever and then it gives me error and makes me reboot. The only things I changed from the factory are a stick 2 gig of ram, latest version of bios and updated firmware for the DVD drive.

  I'm starting to think that the firmware of the DVD drive can affect the DVD because it is not a material commonly updated. I guess right here, but that might be the problem.

  Any thoughts?

  -A_DoNuT

  Hmm... Do you have you have downloaded and used the firmware and the BIOS from the Toshiba page we?
  Satellite A215-7422 belongs to the American TV series and therefore you must use the drivers from the Toshiba driver page we.

  Have you tried to install the OS by using the original CD of Microsoft Windows?

  This allows to know if this problem could be linked to the issue of CD/DVD drive (firmware) or corrupted RAM modules.

  According to your post above, the new RAM 2 GB module has been inserted.
  Perhaps you should withdraw and should try to install the operating system using the original modules were installed in the laptop from the beginning.

  Check it out

• Flash BIOS on Satellite A215

  I have a Satellite A215-S7444 originally shipped with Vista 32 bit, I have since made a custom installation of Se7en 64-bit. There is a problem of coming put fashion 'sleep' audio device disappears. OK, so there is an update of the Bios for my model that is supposed to fix this problem.

  If I remember well in the forums someone had posted "to not start from inside windows or u might completely bork your system." I have dl. The Bios updated and created a "bootable CD" according to the instructions using windows disc image burner, but as far as I went.

  I would therefore like to some someone to write instructions step by step for me on how SUCCESSFULLY Flash my Bios. As much, I know you must press F12 during startup, and then select the "Startup" tab, and then select Boot from disc. "Then you need to select"Save and Exit with changes"or something of the sort. And then restart. Is this correct or am I missing a step? I know that there is a SINGLE shot that if I want to get it's okay. Has anyone else successfully flashed the Bios?

  Thank you for all the useful information.

  Hello

  I agree with the user above. Make sure that you have downloaded the correct BIOS update. Otherwise you may destroy the ROM module

  If you update the BIOS from a bootable floppy, you don t have the stress with running programs. Just start the update and don t stop the laptop during this procedure and hope that everything will work! ;)