Satellite A30-104: WLan not available - I turn on the wireless network card

Similar Questions

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s

• Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

  This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

  I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

  I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

  Pics:

  PCMCIA slot

  The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

  Wireless network card

  Wireless network card; It is a little damaged but it still works.

  Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

  Hi Steve

  Well, I can give t well you not answer how you can just remove the PCMCIA slot.
  There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
  Please check this specific device. Perhaps you have overlooked a few screws.

  But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

  Good luck

  Good bye

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Avoiding PC not allowed to connect to the wireless network

  AA: For wireless in our establishment, we have access Points on all floors that are in turn connected to the main server PC.
  When I opened the "wireless network connection state", click 'Wireless properties', then select 'Security', it shows the following:
  Security type: no authentication (Open)
  Encryption type: WEP
  Network security key *.
  When the "Show characters" checkbox is selected, it shows the "network security key.
  Is it possible that this security key can be hidden and therefore not visible at all. This avoids computers are not allowed to connect to the network.
  All PCs are loaded with windows 7.
  BB: All PC's are connected WIFI and their IP 192.168.1.100 to 120 with the subnet mask 255.255.255.0 range
  I need to connect some of the connected WLAN PC also by a connection to the local network for networking with a Satellite Communicator for internet connection.
  Setting regarding address LAN IP for the PC, I can give them the same IP from 192.168.1.121 to XXX or if IP address
  address be 192.168.0.xxx
  Adv. kindly

  Change in WPA2.
  Put a password on that isn't easy to guess and is greater than 8 characters.
   
  The security key you are watching is on your computer - you have entered it or allowed him to be registered.  Except if you give someone access to that computer (or a similar) they will not be able to get to this part of the system to see what you see.  If you give people access to the use of these systems, do not give them administrative access - they must only use computers as * users *.

• Satellite P20 S203: How can I use the wireless network card?

  Hello
  first - sorry for my English. I have toshiba P20 S203 (I know - old hardware).
  I read a few descriptions on this computer and I know that the model probably have wifi. I see on the left side of my laptop, but don't see it Win Xp Pro Sp2.
  How to turn on and connect to my lan wirreless?

  again sorry for my English...

  Hello

  As mentioned the laptop has no installed wireless network card, but you can improve with one compatible.
  The minPCI card has two cables; Brown and white.
  Usually the white cable be connected to the hand and Brown to the

• I inserted the wireless network card, but it does not work on Satellite A30

  Hello please, be gentle, lol.

  I have a Satellite A30, no manuals, disks etc. of second hand.
  I had to buy a wireless card and installed it myself (error?).

  The card is an Intel P/N: PA3362U 1MPC.

  My is... have issue I installed it properly (see below), and can someone point me in the right direction for the correct driver?

  (Correct?) installation... .clipped perfectly in the slot in the compartment in the base of the laptop. Two sons rolled? one longer than the other?
  I plugged them as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
  How could I not if it works?

  The LED does not illuminate when the wifi switch is on?
  Is it normal when the driver not installed? FN + F8 has no effect? Again the ths is normal without driver installed?

  Thank you in advance, I'm completely stuck here... Matt

  Hello

  The PA3362U 1MPC seems to be a network wireless Intel PRO/Wireless 2200BG MiniPCI Type 3b card. I think it is s ok and should be compatible.

  The WLan driver should be found here:
  http://APS2.toshiba-tro.de/WLAN/
  Take the Intel PRO/Wireless 2200/2915 driver.

  > I plugged these as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
  I put t know which wire is short or long, but the two sons are different in color.
  Should the white cable goes to the hand and Brown to the auxiliary voltage

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=45273

  > How could I not if it works?
  Well, you will not be able to connect to the Wlan ;)

  > Is - this normal when the driver is not installed? FN + F8 has no effect? Again the ths is normal without driver installed?
  You should check if the other FN keys work correctly. If other n t FN keys work then Fn + F8 does not work too

  PS: you can activate the WLan also in Device Manager-> properties-> tab advanced Wlan card

  Welcome them

• How to turn on a wireless network card on a Satellite 3000 514 without hardware switch?

  I have a 3000-514 Satellite. This laptop has an internal mini PCI slot. Recently, I bought an Intel PRO/Wireless 2200BG wireless mini PCI card.

  The drivers have been installed correctly. The computer has detected the card and the condition of the equipment indicates that the device is functioning properly. However, a message appears indicating that the radio is turned off and must be turned on by the switch hardware. It seems not to be possible to activate the card without the switch...

  See the corresponding page in the Intel support:
  http://www.Intel.com/support/wireless/WLAN/sb/CS-020275.htm

  Now, the problem is that the laptop Satellite 3000 514 has quite such a material change.

  Does anyone have an idea what to do?

  Hello

  If the switch is not available then it of not possible to pass the card ;(
  It seems that the camera is not minPCI scalable WLan!

  In this case, he must use an external solution such as a USB WiFi key or card PCMCIA WLan

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?

• Is satellite C660 - 11 H - possible to change the wireless network card?

  Hi guys,.

  I'm looking to change the card Wifi on my C660 11 H since a Realtek 8188CE for a Realtek RTL8187B, for reasons that cannot be discussed on this forum. I was just wondering if the new card will be compatible, if I understand his also a Bluetooth card? I know that in the past, this is a case of grooving of the card and connecting the antennas.

  Finally, can anyone provide me the model number of the integrated Realtek WAN adapter? In system information, he simply says Wan Adapter PCI-E FE?

  Thanks for your help / Ryan

  Hey,.

  To be honest, it would be interesting to know why you want to change the WLAN card. You are not satisfied, or what are the reasons for this?

  In the forum, there are some discussions on the WLAN on Satellite C660 questions but this could be solved with latest Realtek driver and turning off energy saving as you can in large number of discussions:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=58756
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58744
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58733
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58570
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58481

• Satellite A100-785: router restarts automatically when the wireless network card is on

  Recently,.
  Once, I turn my adapter wireless for my laptop 'ON' and it starts to connect to my router 3com officeconnect wireless.
  I found that my router restarts automatically.
  This happens each and every time I turn on my laptop with the wireless adapter ON.

  I use the Satellite A100-785 PPPoE ISP with WPA/AES encryption enabled on the new MS Vista platform.
  All drivers updated to the latest versions, and the wireless signal is Excellent.

  Any suggestions that could be the reason or any recommendation to begin to investigate the matter?
  Everything will be highly appreciated. Thank you

  Once again; Your WLan router restarts (reboots) when you turn on the WLan on the A100 Satellite Map. Am I wrong?

  Well, it's strange, but to be honest I n t see a problem with the laptop but with the router. I would recommend controlled again the unique WLan router configuration.

  Good bye

• Premium 8600 Pro Office jet: Officejet pro 8600 not found by computers on the wireless network

  Hi all!

  I had this problem and goes out at least once a year...

  When I go to print on any computer through wireless connections, computers can't find the printer.  The printer is turned on and connected to the network, and network results show that everything is fine.  I did everything, including restarting the printer, by restarting the computer tries to print the form and reinstall the printer, and I get the message "Printer" not logged on computers.  Each moon blue, if I leave it long enough, he will find somehow the printer and printing, but as I said it's extremely rare.

  Logistics-wise, I am using Comcast for cable internet, and are all Apple products.  The modem is a Motorola and the router is a Linksys.  The router is less than 25 feet from the printer, and there is a clear shot-not walls or to block the signal

  Thanks to all of y ' alls for help!

  Hey @jgossc,

  Welcome to the Forum from HP Support.

  I see that you experience the Mac-to-printer communication problems. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer using HP Easy Start.

  If you find the connection of the printer is more coherent then fine. If this is not the case, click here for detailed instructions on how to address the issue. In particular, it may be useful to clarify the matter once and for all from affecting a static IP address. Please let me know the result of your troubleshooting by responding to this post.

  If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "accept as Solution" (this will help others find the solution).

  Thank you for being a part of the community of HP.

  Have a great day!

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• What wireless router and the wireless network card can I use with my Satellite 1800?

  TOSHIBA SATELLITE 1800-314
  I NEED TO KNOW WHAT WIRELESS ROUTER SHOULD I BUY AND PC CARD I SHOULD BUY.
  MY CD/DVD ROOM DOES NOT READ DVD. Thank you.

  Router is not relevant at all. You can use what you want. Interesting is what WLAN card on your device is installed.

• Satellite P100-188 starts after the upgrade of the wireless network card

  I recenty installed a new Intel 5100 Series 512AN_MWW Mini PCI NIC in my Satellite P100 - 188 PSPA3E database.
  However, when it is installed, he refused to view and start.

  I'm sure (read the technical info) that these cards use the same interface.
  So why it won't work?
  Is an update of the BIOS to enable a feature. If so, could someone kludge one together please?

  I have the latest version of the BIOS installed 4.70 and am running Windows Vista.
  I am desperate for this that I already have a project N AP 2.0 and want to use it to its full capabilities.

  Cheers, Rob

  Hello

  If I understand your message you have improved the Interior card WLan Intel (Golan) Intel 3945ABG 802. 11a / g to Intel 5100 with project support.

  Boyfriend although it seems that you can't use the WLan draft N card in this laptop model.
  Seems such card is not compatible and cause interference.

  As I know the Draft N need of 3-wire antenna the antenna Satellite P100-188 supports 2 wires only and can be used with the 802.11 A, B or G standard.