Satellite A30-931 - what happens if the BIOS update will not?

Similar Questions

• Re: Satelite A500 - what happens if the BIOS update will not?

  Jin

  I have a new Satellite A500 and want to update Bios. What happens if this process does not go?

  Thnks

  Hello

  I do not recommend to do a bios upgrade if your system works well. If the upgrade process go wrong your mobile doesn t boot more, and then you will need to contact
  TASP (Toshiba authorized service provider).
  Be sure to close all programs, disable antivirus, firewall.

  Welcome them

  Post edited by: jeka-Israel

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Satellite L450D - nothing else happens after the BIOS update

  Toshiba Bulletin Board recommended 1 new message. Downloaded updated BIOS available. Frozen computer during the update and what would not be it. Now, the computer is totally dead. Power light turns on when the connected external CAP but nothing else. I did follow the instructions specific to Toshiba. Pleas advise.

  Thank you
  adrianevans

  Hey,.

  It of strange that the BIOS update gone wrong, because I already did several times and never had a problem did you run background applications they probably blocked the update?

  Anyway, what you can try is to remove the battery and the AC adapter / CC for a few hours. Then reconnect and try to boot up your laptop.

  In the worst cases the ROM module needs to be reflashed, but an authorized service provider can help you get rid of this problem. :)

• The BIOS update will not install on Satellite P10

  I have tried and failed to update the BIOS of my Satellite P10 (PSP10E). I downloaded the bios - 20070807133603.zip because it is the update available for this machine.
  When I extracted it and run the SETUP program. EXE file I get a message warning "rom size incorrect." The other extract file is al00200a.rom.

  Can anyone help?

  Found the answer here - [http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm] - via Google.

  Fundamental problem, is that I was by double-clicking the zip instead of a click right-extract all.

• The BIOS update will not start on Satellite L40 - 14F

  My laptop was acting wonky so I downloaded the latest update of the BIOS, but when I opened a small black window jumped to the top for a brief second and then nothing happened.

  I tried several times, it does the same thing. I use Windows XP with SP3. I'd appreciate any help :(

  Update BIOS you have now and the one you are trying to install?

• HP Pavilion 15 - ab 155sa: download the BIOS update will not end

  I was prompted to download HP Notebook System BIOS update (AMD processors. ) The "Setup" screen confirms that it is to install the update of 8,89 MB but does not end. I tried three times wait more than an hour each time with success.  Would appreciate your advice on how to solve the problem.

  I was able to get this problem solved by Mike via online do chat on case no 3027047713 (disconnect WiFi problem). Using remote on my laptop, it was able to download the proper drivers. So far, everything seems to work ok.

• The BIOS update will not work? Lenovo X120e

  Hello world

  I'm trying to update the BIOS of the laptop with the lenovo Thinkvantage application. It continues to download the app and then it breaks down. Please can someone help me?

  Thank you kind people for assistance and support. I managed to Flash the BIOS. I went and downloaded the patch on the site and it worked a treat first time round with no hang ups or anything.

• The BIOS update does not work on the Satellite - cannot load PHLASHNT.sys

  "Cannot load the PHLASHNT.sys driver.
  It gives then a few silly respons to check if you have admin rights or not.
  Under windows, very nice everyone has admin right here, that the problem with this :-/

  Hello Clemens,

  PHLASHNT. SYS is flash Phoenix NT driver that is necessary if you're updating a Phoenix BIOS. However, you don't tell what Satellite phone model you update or what version of the BIOS update you are using (Windows or traditional). Please send additional information so that we can try to help you with your problem.

  Kind regards

• The new update will not install.

  The new update will not install. (it is said there is a problem with a file called spill.aex)...

  I tried to delete after effects to reinstall, but who doesn't either so now I can't the legacy at all.

  THE FIXED!

  I changed the name of the card effects that included the broken file. (still cannot delete the file itself :/ but at least after effects works again!)

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Ports Satellite A135 - S2306 defective USB after the BIOS update.

  OK, I searched all over the internet and not found anyone else with this same problem, or anyone with a solution that worked for me.

  A few weeks ago, I had the common error of the BIOS reset itself and asking for a password at startup. I took my local Toshiba authorized repair center, and they have not taken care of him, no problem.

  Since the resume, however, all 4 of my USB ports have been going crazy. What happened in the following three steps (in order):
  -One of the ports does not work at all, won't provide any current or even recognize that nothing is connected.
  -The 3 remaining ports are now only recognized as USB 1.1 ports, not USB 2.0 as they were before.
  -Now, only a very small number of my devices is not at all, with three USB mouse and two unrecognized hard drives work (I get the error message "USB device not recognized" standard Windows when I connect them to one of the three ports).
  I am running Vista Home Basic (32 bit) with SP 2 and the new version of the BIOS is v1.60.

  Is this something people of repair caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  The old Duke

  Hello

  > What is the repair people caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  It is not easy to say. I think that would be best to ask guys why it happens or what they have done in the past.
  But have you set the default BIOS?
  Please do; access the BIOS (by pressing F2). Set it to default by pressing F9 (I guess) and save the changes. Restart the unit.
  Access the Device Manager, and then remove all hubs USB and commands from the list of devices. After that reboot the device again. Windows should recognize the devices deleted again.

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Satellite C660 - 1 7 - cannot run the BIOS update

  Hello

  I use my Satellite C660 - 1 7 for a year now, and recently I have a Wi - Fi connection problem with my laptop. I can find the network in my laptop, but it loses the connection permanently. It's a little boring.

  Then I tried to update the BIOS update, but each time, he showed "there is an error occurred, please check below the elements." BIOS version more than 200. battery capacity more than 10%. AC is fixed. "Well, I checked, and it is" TOSHIBA 1.40, 2011/1/21 '. "

  Can someone help me please?

  Thank you

  >... but it loses the connection permanently. It's a little boring.
  Do you have this problem with power supply battery only or is the problem when the laptop is connected to the power supply running too?

• Once the Satellite L350-172 BIOS update will not boot

  Satellite L350-172 Bios setting bios-20090203164614 bios-201002250 updated

  I just lie down the BIOS of my notebook to 1.60 to 2.20. Now, the laptop no longer starts.
  'He was arrested for reason not to damage the computer' - blue schreen.

  How can I downgrade the bios again? Or - that I have to change in the bios settings?

  >.. .which I change in the bios settings?
  If I understand you just can't start your laptop so enter the BIOS settings is not possible.
  Can you confirm this?