Satellite A30 - CD-ROM does not work correctly

My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?

Looks like catch 22. Someone at - it help him?

I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.

Tags: Toshiba

Similar Questions

  • Satellite U200: DVD - ROM does not work correctly

    DVD - ROM not working. After the fire of two optical drive DVD - RW, loss of ability to burn and can read only CD with difficulties of the sum. It is not possible to recovery operating system.

    Look like lost laser precise positioning device and can no longer read high-density data on DVD, but on the sum of CD singing can be found with difficulty.

    Your description sounds like a reader lens problem.
    Probably the lens can not calibrate in the right position, and that's why the drive can't handle DVD media.

    Bad news buddy this problem is not repairable with updates. Above all it s a hardware problem and the drive should be replaced!

    I would recommend contact the ASP which is responsible for you country to organise a replacement.

    Good bye

  • New keyboard on Satellite L500 - 19 X does not work correctly

    Hello

    About a month ago, I spilled pepsi on my laptop and had sent for repair. I came home today and he had a new keyboard installed, among other things. But the new keyboard does not work properly.

    A bunch of key type is close to letters instead. For example, type 'a' gives 'aq1', 'b' gives 'bgt '. It seems to type the letters vertically above. Some work very well.

    Is the new defective keyboard, or is it need calibrated or something? My laptop model is L500-19 X.
    Thank you.

    My advice: don't waste your time on the forum waiting for help. How do give you the right answer to your questions?
    I have only one answer to your question: no, keyboard doesn t need to be calibrated.
    Contact the service provider as soon as possible and ask for help.

  • Satellite A30 - Wifi PCMCIA does not work

    Hello, please help.
    I connected a PCMCIA Wifi Netgear card for wireless access. Unfortunately, even if I get all the signs that I am connected, internet Explorer will not access the internet. I checked all firewall and antivirus, etc...
    Here, I get a sign that I'm connected, but it does not work. I even get an ip address, I'm confused.
    I connect with ethernet without problem.
    I have the same problem connecting with a USB Wifi adapter, it does not connect.
    It seems that something is blocking before connection to the network card.

    Help, please.
    Kind regards
    JS

    Hello

    You have this problem just with IE or other applications like messengers?

  • Satellite P30: Energy saving does not work correctly

    Hello
    I have a Toshiba Satellite P30 (with Windows XP) and I have problems with my energy saving mode. When I use it for games and other applications of high power, it gets really hot on the edge of the moitor and stops.

    Is it for the last month or two. Before that, it was absolutelly no problem. I checked the file TPSTrace and got this error message:
    A fatal error has occurred. The program will end. Code: 0x0 rental: MainFrm.cpp (1317)

    I do not know what to do with it and how to solve the problem. Any ideas?

    Hi Thomas

    It is not easy to give you an accurate diagnosis, but in my opinion your laptop isn't hot because of the energy savings. Satellite P30 is pretty old laptop and maybe you should clean your laptop.

    Have you done this before?

    This error seems to be serious and what you can do is to remove the preinstalled energy saver and after restarting try installing it again.

    Just FYI: Watch tool is very useful, but certainly not so important and your system can function very well without it. Because of this, I presume that portable hot is because of dust inside. With more CPU and activity hardware graphics card will be hot and must be cooled properly. If the cooling rack does not clean this cannot happen. Initially, notebook will be hot, but one day she is probably turned off without any warning.

    In the first trial step to clean your laptop and remove all the dust under cooling grill.

  • Satellite M30X graphics card does not work correctly

    The best I can describe the problem is that the display looks like he has a trellis in front of her.
    I connected a remote screen I know works fine and the problem is the same, so I'm sure that the problem is not the LCD display itself.
    Looks a bit like a screen of matrix of the film of the same name. I also tried to replace the motherboard, but the problem remains.

    The laptop itself works very well and always does everything its supposed to but the screen make it practically impossible to read.

    Any ideas?

    Unfortunately, it's really not easy to say what could be bad exactly.
    Maybe it's a problem of graphics card chip.
    According to your description this fault could be possible.

    Most of the time it s advisable to ask and laptop for an audit technician. He could run a diagnostic test and could locate the hardware failure more quickly.

    Sorry, but that's all I can suggest.

  • Satellite A30-130 Modem does not work - error 680 not tone

    I have a series of portable A30 - 130, recently, I've noticed that when I want to connect to the internet through dial-up connection my modem generates an error that says: error 680, no dial tone.

    I am quiet sure that there is a dial tone, and also, I reinstalled windows (Windows XP Professional SP2) can help solve the problem, but I got the same error. I questioned the modem in the modem control panel, every thing is quiet, very well, seems there is no problem, also I have disabled wait for the tone option in the control panel of the modem, but without help.

    I bought my laptop in UK however however I am now in Iran and the modem worked well quiet for about two years and all of a sudden the problem arised.
    Can someone help me?

    In addition you can introduce me an authorized service center for laptops Toshiba in Iran?

    Hello

    Let see what Microsoft say about this http://support.microsoft.com/kb/326681

    Check this document and see if you can solve it using available Microsoft troubleshooting.

  • Satellite A200 DVD-ROM does not work

    I received an error code 39 for my dvd device. The device driver and software are installed ok. I do not have the technical specification, so I don't know what code eror 39 is.

    Hello

    The error code 39 is very similar to error code 31.
    This code is known to me. I saw this question here in the forum from time to time.

    The solution is very easy! remove the upper and lower filter registry ;)!

    I found this Microsoft Knowledge base article that provides the details and the solution:

    Cannot access CD-ROM and Error Message "Code 31" in the device after Manager removed Adaptec Easy CD Creator on your computer
    http://support.Microsoft.com/kb/270008/en-us/

    Please follow the guidelines and the report if you did!

    Good bye

  • Satellite A100-487: game does not work correctly

    My son has a 487 A100, running on Windows XP. I recently bought him a game and it loads fine. The game played for about 15 minutes and close that back to my desktop screen and gives an option to send an error report.

    It has 1 GB of RAM so I am a little confused, this could be a graphic problem?
    Can someone advise me and point me in the right direction. any help appreciated

    It will be interesting to know what kind of game you bought for your son. It's really not easy to say what can be the problem. You will find an error report in the event viewer?

    Administrative Tools - Application Event Viewer control panel

  • Satellite A30 303 keyboard does not work

    When I type something with my keyboard without characters appear on the screen. I've tried to sort by reinstall the keyboard drivers, but this makes no difference. Please, can someone advise?

    Hello

    On this path, it is not easy to give you any adequate explanation why this happens. In my opinion, the only thing you can do is to preinstall the device with the recovery media. If the problem persists even is the faulty keyboard or there may be a problem with the contact.

    Try to remove the keyboard from the Device Manager, and then restart the device. As far as I know, there is no special driver for keyboard and it is automatically recognized by the operating system.

    Good bye

  • Satellite A300-1EH - windows installer does not work correctly

    Hello, this is my first post on this forum!

    My windows installer does not work correctly.
    What should do?

    Soryy, but I did not now much on computer systems.
    I have reinstall this installer?

    I'm waiting for your answers.

    > My windows installer does not work correctly.
    What do you mean exactly? You see a mistake? What exactly happens?
    Maybe your CD is scratched or damaged.

  • Satellite A30: FN keys do not work

    Satellite A30 FN keys do not work

    Hello

    What especial of the fn function does not work?
    If you want to use, for example the FN + F3 or FN + F2 you need preinstalled power saving.
    The Fn key functions depends on the application of 3rd as a saver or display pyromecanismes change utility for FN + F5.

    You should check the saving of Toshiba for the necessary drivers and reinstall it.

  • My CD-ROM/DVD-ROM does not work

    My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
    1 device state poster (this device cannot start. (code 10)).
    2 update driver... shows that the best device driver software is already installed.
    3. it is the driver of manufacturing.
    4. I tried the microsoft fix it downloads and it has not solved the problem.

    Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

    Grateful for any advice...

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My DVD player does not work and all the information I can find is "this device does not work correctly.

    Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

    I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

    I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
    entries that do not fix the resolution of problems and those who "could" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
    There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
    Parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • My phone does not work correctly

    My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

    Take it to an Apple store for diagnosis.

Maybe you are looking for

  • Arbitrary analog output USB-6281

    Hello, I am very new to LabView and national instruments. I'm trying out a sinusoidal signal with noise with my usb-6281. I can't find how to do this in labview 8.2. I see how a normal sine wave of the express signal and the measuremtn Explorer & aut

  • build the version of source code

    I know that it is possible to use a quantity of variable data to produce the installers and output of build version number. But is it possible to derive variables or macros from code source like my version of build?  It would be very handy!

  • new e-all-in-one officejet pro 8600 black does not print

    I can't print in black with my new printer. HP says it's out of warranty. I bought it on Amazon of Bob Electronics and they had him as a monitor in use. Has not been used, but if the warrantly expired.

  • Need to write a different SQL query

    Oracle version: 11.2.0.4create visitors from the table (name varchar2 (10), dated $vdate);Insert values ('John', sysdate-3) visitors;Insert values ('John', sysdate-2) visitors;Insert values visitors ('John', sysdate + 1);Insert values visitors ('Thom

  • Availability of vCenter [Noob Question)

    Hi allI'm new in the world of VMware, I try to understand 'staffing Vcenter availability. "shortly I read some sources which he somehow to provide but I focused in "to using Vsphere HA" with Vcenter as VMthe thing confuses me Vsphere Vcenter has to p