Satellite A30 Com3 (modem port) does not

My port Com3, such as used by Toshiba softmodem, is nowhere to be seen, is not listed in device drivers and cannot be recognized by hyperterminal. There is an entry in the hidden device drivers where it was yellow triangular. I disabled it, but he wouldn't reactivate. There are entries in the registry for it. I've updated the BIOS.

If I try the softmodem I get message 633 port already in use or not properly configured. My suspicion is that the port was blown by power surge on the phone line. Anyway I can test it before sliding off the coast on a service partner? Thank you

Hello

Check the documents of Microsoft:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;324760
http://support.Microsoft.com/default.aspx?scid=http://support.Microsoft.com:80/support/kb/articles/q191/4/44.asp&NoWebContent=1

Maybe you will find useful information here.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

    I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

    Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
    The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

    Plug the mouse on or off doesn't change anything. Only restart helps.

    Any ideas?

    It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • Satellite P10 824: modem driver does not install

    I have a tosiba Satellite P10 824 and the modem driver not install what can I do? This page driver is installed but the modem does not work.

    Hi Cienciala

    If the reader is already installed and the modem is correctly listed in the Device Manager, do not try to install it again and again. I advise to enter the properties of the modem in the device and on the diagnosis tab Manager list, you can use Query modem and verify the results.

    If the modem does not work it may also be the configuration dial problem.
    By the way there is also a useful site, you can check http://support.toshiba-tro.de/kb0/FAQ35006G000UR01.htm

  • Satellite M300 - left USB port does not work

    Hey,.

    I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

    Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

    Any advice? Thank you very much!
    Dan

    Jin

    I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

    Greers

  • Satellite A30 - 404 - the fan does not work

    I have a Satellite A30-404 for a couple of years now, and recently I saw serious problems with my laptop.

    Let me start from the beginning:

    My laptop has been a few months, when he suddenly stopped, I contacted the helpline and they picked up the phone and fixed.
    Again, a few months later, it happens again and I call them, they tell me that the problem is caused by the dust accumulating on the radiator of the laptop.
    I used a vacuum among fans to clean dust.

    When I do that, indeed, there was a lot of dust coming out, so I made this process, I realized a few months and the laptop remained very well.

    A few months ago, when vacunuming the pc again once I heard something breaking and I soon realized that all the components of one of the fan where gone.

    Probably one of them broke and since it had to be rotated at high speed he stopped and beat all the others. So I had 2 broken fans 1. I realized that in the long term that my processer could be destroyed because it did not good cooling. Since then the processer would become very hot and consumes much more energy than normal.

    Now, I also have the problem that whenever I turn on the pc it starts slowly draining battery (its plugged into the power supply). It's like I have a giant battery, the laptop power and eventually it will turn off. I also tried to boot the pc with no battery at all and it works very well for a while, but then it turned off suddenly. I try to turn on the pc and after 1 or 2 seconds it stops again. I don't know if its related to the fact that the processor is damaged boats.

    I talked to a lot of people in order to get the fixed fan but they say it can become very expensive since its hard getting the same fan. And by the way, when I work on the computer with only the battery that it depends on almost an hour

    Any suggestions? Help, please

    EDIT: I turned of the auto in hibernation when the battery is low to see what is happening, the energy of the battery indicates 0%, but the laptop stays on.

    Hello

    Well, you should be cautious if you use the vacuum cleaner to clean the fans. It is risky!
    Extra ball bearings might damage if the fans turn too fast.

    So if you have no experience with these procedures you should t do.
    The person with the experience as a technician workbook must clean the fans and cooling modules.

    I agree with Doomlord, and it seems that you need a new cooling module.

  • Satellite A30-404: DVD player does not read some DVD

    Hello

    I have a satellite A30-404, and recently, I installed a new firmware update for my TOSHIBA DVD - ROM SD-R6112. (page can be found [here | http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=NL&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 518 & langua ge = 33 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 28 & selectedLanguage = 33 & type = all & page = 1 & ID = 46804 & DISO =-1 & driverLanguage = 42])

    Since then, I can't play some DVD I write, for the most part, the 4 GB DVD +, for example, I can perfectly read a 1, 3 GB DVD with 3 multisessions.

    However, other computers can read the DVD I can't.

    Help would be appreciated.

    Maybe the new firmware does contain all of the information on the DVD.
    Do you know what firmware is or what information it contains?

    The firmware of the drive contains simple information about the support that can be used, what burning/reading speed is supported, which average manufacturer is compatible, etc.

    Maybe the new firmware contains other information such as and therefore CD/DVD cannot be played correctly.
    I think in this case, you need to test different CDs/DVDs and try to burn at a different rate.

    PS:
    http://support.toshiba-tro.de/KB0/TSB56012R0004R01.htm

  • Satellite A10 s203: USB ports does not work

    Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

    Hello

    If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

    Good bye

  • Satellite A200-13O - USB port does not work

    Can you help me? I have a new Satellite A200-13O, USB does not work.

    Hi Gilbert

    What do you mean exactly with the USB does not work?
    You plug the 3rd USB external devices advantage, which cannot be recognized?

    Have you installed all necessary drivers for these devices?

    What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

    Please post more details!

  • Satellite C855-29N - HDMI Port does not

    It was working perfectly before but now when I try the computer makes noise and seems to connect to the tv but there is no signal to my TV?

    I wonder if it is a driver problem, but it looks more like a faulty connection which means that it is gone forever? :/

    Pressing the function key F4 (Fn + F4) should change the screen output.
    It does not work. Right?

    Could be interesting to know if the graphics update driver / new installation would change something here have you tried it?

    In the worst case, you will need to recover the laptop back to factory settings to check if its hardware or software related issue and I think that the problem of software.

  • Satellite L40 - 18W - USB ports does not work after format HARD drive

    I formatted my laptop "L40 - 18w" after that all usb ports do not work.

    Could you please help me on this issue

    Thank you

    Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
    Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
    There you can find all the drivers for your model of laptop including driver chipset.

  • Satellite A30-141 sound card does not work

    I have a Toshiba Satellite A30-141.
    Last week I formatted the laptop then after I tried to install the adapter driver (realtek sound semiconducter) downloaded from the toshiba site, but now very well symbols sound card, but I don't know why his work doesn´t on my system.
    Can someone help me? I'm stuck with this system, because my presentation doesn't work anymore.

    waiting for help

    Hello

    I think it would be best if you try the realtek driver from the homepage of manufacturers (http://www.realtek.com.tw/). This driver should work no doubt, my machine gives sound without problems with only the drivers.

    Welcome them

  • Satellite A135-S2286 - USB ports does not work after BIOS update

    I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

    When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

    It will be useful, if someone has a solution for this error.

    Hey Buddy,

    Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

    If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

    I hope that it helps :)

  • Re: Satellite L40 - 14N - Ethernet port does not work

    Hello

    My ethernet LAN doesn't work anymore - laptop computer signals that it is fine - when I plug a cable in there still says no cable attached.

    I've updated all the drivers - is their a FN key that turns off? or can someone help me?

    What laptop Satellite you have exactly?

    The LAN port can t be enabled or disabled with a FN key. It is possible that wireless (FN + F8).

    Have you tried to update the BIOS? You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

Maybe you are looking for