Similar Questions

• Qosmio F30 does not recognize USB devices

  My new Qosmio F30 does not recognize USB devices. Displays Device Manager USB ENHANCED CONTROLLER and ROOT HUB works fine, but the machine still wants to install each device but cannot. BIOS version seems to be V1.30. I tried the devices on other machines, and they work fine.
  Is there something that I missed?

  Hello

  Before your shot the beautiful F30 can you please say what OS you are using?
  Did you use the OS from the Toshiba restore CD?
  On this CD, all drivers must be preinstalled and you don t need to install no matter what chipsets or anything like that.

• Satellite L50 - B suddenly does not recognize USB devices

  Suddenly my laptop does not recognize any USB.

  The USB key or external hard drive works on other computers, but not on my laptop.
  Only cards SD-are recognized.

  I tried to remove the usb portals on the Control Panel, but after I restarted my computer all returned.
  One reappear with a caveat that it does not work, but when I search a new program to run it, it can not be found. After removing it, it comes back with the same caveat.

  I also tried to download the new discs (chip set utility) but who doesn't either.
  I don't know what else to do.

  Can someone help me if I can access my USB-products once again on my laptop?

  Hello

  What about the USB mouse? You can use the USB mouse connected to one of the USB ports?

  Have you changed the system or you have installed new OS on this laptop?
  I m asking because the L50 - B Satellite supports USB 2.0 as well USB 3.0 ports

  In the case where you have installed the new OS (Win 7?) on this laptop, the USB 3.0 ports would require additional USB 3.0 driver

  However, in case that you are always using the OS preinstalled Toshiba, I recommend you to reset the initial setup and test the USB ports once more.

• Windows Media Player does not recognize usb devices

  My Windows Media Player has stopped connecting to my usb key, so I can't sync. my music any longer. Computer recognizes the usb, but not WMP

  Hey Joe,

  Maybe rebuild the database of Windows Media Player could solve the problem.

  Here is a link where similar problem is resolved by disabling the database corrupt:

  Please refer to the suggestions that are marked as answer.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/WMP-doesn

  You can even try to reboot/turn ON the "Portable Device Enumerator Service":

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Player-12-does-not-recognize-removable-media/69a1be0e-9451-42b8-88b6-a69f0b324456

  Let us know the results.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Satellite L550 does not recognize USB Headset

  Hey,.
  I have a Satellite L550 and buyed yesterday a USB headset but my laptop does not see somehting when I put the USB in the port?

  How can I solve this problem?

  Have you noticed the same situation using all USB ports?
  Other USB devices are correctly recognized?
  What operating system do you use?
  Use of the original BONES you with your laptop?

• Windows 7 does not recognize USB devices. Have no system access keyboard or mouse.

  Separated from this thread.

  It is a question.  I have a Windows 7 laptop.  It has three USB ports.  They always worked perfectly.  Today, one of them stopped: Port_ #0001.Hub_ #0002

  A sign of error says: "unrecognized usb device".  Troubleshooting, said that there no problem but under properties of the device, he says that Windows has turned off because it has detected a problem (Code 43).  I tried to plug in several things: camera, various readers flash, mouse, etc. They all used to work properly until today.  Now, it's just a dead port.

  Hi Seiberte,

  Thanks for posting the request in Microsoft Community Forums. I appreciate all the steps you tried to solve the problem.

  What is the brand and model of the computer?

  A device driver has notified the operating system that the device failed. This situation can occur if the peripheral equipment fails or if the device driver fails.

  To resolve this issue, follow these steps.

  1. To open Device Manager, click Start, click files, and research programsand type Device Manager. A list of the available items will appear above the search box; Click on Device Manager. Device Manager opens with the name of your computer to the top and a list of the devices installed on your computer under the name of your computer.
  2. Locate the device in the list of devices, right-click on the device and then click Uninstall. When a warning message that you uninstall a device in your system, click OK. Device Manager uninstall the device.
  3. Right click on the name of your computer in the Device Manager, then click on Search the hardware changes. Device Manager scan your system and reinstall your device automatically.
  4. Right click on the device, and then click Properties. The general of the device, in the State of the device Properties dialog box tab, you should see the message this device does not work correctly.

  If the steps above do not solve problems with the device and the device is an external drive, such as an external hard drive or USB flash drive, use the icon of the taskbar to safely eject the device, and then disconnect the device from the computer. For devices that use AC power, unplug the unit from the wall outlet or the power strip, wait 30 seconds and then plug it in again. Turn on the switch of the device and then plug it into your computer. If the system includes a driver diskette, ensure that you have at hand to install device drivers; otherwise, Windows should automatically locate the appropriate drivers and install them.

  Referred to article:
  
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873(v=WS.10).aspx

  For more information, see these articles.

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Hope this information helps. Response with status so that we can help you.

• Re: My Satellite L350 does not recognize USB key

  I have a Toshiba Satellite L350-235. It suddenly stopped recognizing my usb key that I use every day. Normally, he would say "new hardware found" and allow me to click on the F drive, now I get nothing!

  Can someone advise me?

  I guess that the USB ports are working properly if you connect another device; something like USB mouse. Right?

  In my opinion, you should test the USB in USB ports.
  You can also try to remove the USB controllers and hubs from the Device Manager list.
  After restarting of new laptop, (ports) USB controllers must be recognized, and then you could connect and test the USB again.

  In the event that the USB is not recognized by one of the available USB ports, try to connect to another USB key.

• Win XP Pro sp3 does not recognize USB devices.

  I get the message "(défaillant ou inconnu)." "Install driver or driver not required" (!) Can't uninstall/reinstall driver in Device Manager. What should I do my Canon 40 d DSLR recognized? The camera is perfectly functional.
  UPDATE! I used a different USB cable and the problem disappeared. That would be the life that were easy!

  Hi Michael,

  As you mentioned, the problem disappeared using another USB cable, it means that the USB cable has gone wrong.

  You can continue to use another USB cable to connect the Canon 40 d SLR digital.

  Hope the helps of information.
  Please post back and we do know.

• Satellite L640 - does not recognize USB and does not start webcam

  Hello

  I regularly get the pop up usb malfunction when built in webcam fails to launch, I booked service, but now it works again. Any ideas what causes this and how can I prevent in the future? My family is abroad, and its function that I use more.

  Thanks in advance.

  Hi europacific,.

  > I get a pop up usb malfunction
  This popup you get exactly? You can post a screenshot of this message? This would be useful.

  Sorry, but what to say on this subject? Some clarification would be useful, and no one knows what operating system you have.

  If you have some problems with the webcam I would try to update the driver for the webcam. You can download it from the official website of Toshiba.

• Computer does not recognize USB devices after startup XP

  Computer was working fine.  Moved (by car) to another office.  At present, the keyboard will work until the time starts windows XP (SP3); It can control the it function and has a light illuminated NUMLOCK.  As XP starts, the Numlock light turns off and the keyboard is no longer functional.  It is obvious that the keyboard works, and the USB seems to be OK because he has worked with several installed keyboards until XP load upward.

  Any suggestions are appreciated!

  What type of laptop do you have? In the BIOS make you emulation USB is lit and also make sure that in XP right click on my computer got in the hardware Manager then drive and make sure that there is no '? ' marks in the screen of your driver. Otherwise, this looks like a motherboard might be on the fritz...

• Statellite M100 does not recognize USB storage devices or SD card

  I had problems with my laptop Toshiba Satellite M100 series read don't not Sandisk SD card in the camera to my son - is a 2 GB card and what I read online, maybe that is the problem BUT the laptop is also not reading any of my devices USB "stick". When I insert the SD card or a USB 'stick' he asks me to install the driver software that is simply stupid. I tried to connect the camera via a usb cable too and it does not recognize the device and still once, claims the driver software device.

  I looked on the toshiba site and have installed all updates that I thought may be justified, I'm also trying to run Windows update (at least every 2nd week anyway so it shouldn't be a problem). I am running Vista Home Edition (32 bit). The USB ports have certainly worked in the past, I don't really want to resort to execution of recovery discs if I have as I don't want to lose all the stuff I've stored.

  Question of the SD Card/USB seems to be a common one, but I can't find a specific patch to this topic or any other tech site, any suggestions?

  See you soon

  In your case, I would do two things.

  First: Check if a new BIOS is available. Search on the Toshiba site and do an update.

  Second: Reinstall the laptop with the recovery discs. I know that you will lose all the data, but you can save it to s DVD or external HARD drive.

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• ITunes does not recognize my device. I have windows 10 on a HP Envy.

  I recently bought a HP Envy and it came with the operating system Windows 10. Whenever I plug my phone the phone companion rises and ITunes does not recognize my device.

  All the patches?

  Install the latest version of iTunes on your computer.

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support