Similar Questions

• Satellite A30: Does not recognize USB devices.

  My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

  However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
  Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

  Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
  Could you please help me?

  Thank you!

  Hello

  If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

  On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

  USB port: I found a useful paper on this topic:
  http://support.Microsoft.com/kb/873169/en-us/

  Good bye

• Printer does not work with computers on the wireless network

  Yesterday I went to the HP site and downloaded the rcommended drivers associated with my Win 7 computer and printer Officejet 7310.  Since then, I can't print at all.  My other laptop connected to the network (Win Vista) will not be printed or the other.  My computer says that my printer is offline.  How can I get these devices to talk to another new

  Two printers working now!  Thanks for the help

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• Satellite 1415 does not see HARD drive

  I just finished my old 30g HD to a 160g via a cable usb/ide on my Satellite 1415 cloning/adaptation.

  I've used Norton Ghost who said using the copy MBR 'not' option, I have to format the new drive. It took me over six hours to do due to overheating closed the first period which forced me to do it again.

  Now with the new full disk, I installed in the machine and starts, received a message "NTLDR is missing" on the first try. After going in (WinXP) disk management I noticed that the new drive was now three scores, two the same size that the old hard drive and the last not allocated. I looked at the files in the first partition and found that I do not need so I deleted the files and the partition. The remaining active partition has all the Po files, that I need so I have it assigned a drive letter.

  Now to start with the new drive I get missing operating system message. I ve changed the boot order and linked to the boot the ghost CD but had no luck with either. Of course the machine does not see the disk, so my question is how I can get to see the new drive letter to start when it seems now that for a C:\ drive?

  The only option I see in the BIOS is boot order change. Thank you

  Hello

  To better understand:
  The ability of the entire HARD drive is recognized properly?

  To be honest, the whole story is a bit confusing for me. I use Norton Ghost with WXP too and I know that you can create your own recovery image and burn on CD or DVD. This medium, that you can use to install an operating system.

  You can also save files to recovery on the second partition and then copy to external HARD disk.

  With the new HARD drive using Microsoft facilities CD and install WXP. Create own partitions on the new HARD drive and all ghost copies files to the second partition (new HARD drive). You may not install all driver and tools but install Ghost on this OS fresh and naked. Start the ghost and Recover My Computer option. So, after 20 minutes, you'll WXP as on the old HARD drive.

  I did it with my old Tecra.

• Satellite A30 does not start

  I hope someone could help. My A30 does not start although DC is green and the battery charges (amber). There is no beep or Flash. I removed the battery and tried to start on the current. Did not work. (75% frustration level) Heeeelpppp

  Hi Serkan,

  Do you see the Toshiba "splash" screen when you try to turn on your A30? If this isn't the case, then it is likely that your motherboard has failed, and you will need to refer to an authorized Service partner.

  If you see the 'splash' of Toshiba screen, but your portable computer does not load its operating system, then it is likely that there is a problem with your hard drive.

  Kind regards

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Satellite A30-104: WLan not available - I turn on the wireless network card

  I have a Toshiba Satellite A30-104 with an inprocomm ipn2220 built in wireless card. The problem I'm having is that when I get a network says its not available and asks me to turn it on.

  The driver is installed for the card, the switch for the wireless is set on you and I pressed FN & F8 and yet led remains off and nothing happens.
  I watched autour and seen that some people cover the terminals 11 and 13 and it works but not too sure.

  I also should this problem with a new card or is there a way to fix this?

  Any help much appreciated.

  Hello

  I guess that you upgraded the wireless lan card later, didn t you? I know that 11 + 13 pins hint and it worked, but after awhile the card did not and the connection quality was so poor that I bought a card atheros on ebay and this card works really well. So I suggest that you are looking for a card atheros on ebay and to install such card in your system since the cards are known to work properly in the toshiba machines.

  My configuration: Tecra 9100 with P4M and Atheros 5005 G MiniPCI card

  Welcome them

• This computer does not have an installed and configured wireless network adapter

  Hello. I'm having serious problems with my computer. It's a Dell 1545 Inspion. After having a problem with my HP printer, I contacted HP and was instructed on how to remove and uninstall the printer from my computer. After that I followed this process my computer has never been the same. For example, all of the icons in the start menu had little pictures of records instead of the icon associated with the program. Anyway, after a lot of problems, I decided that I should restore my computer to factory settings using the CD of the operating system supplied with my computer and the instruction booklet on how to do it. Now, the computer cannot connect to wireless internet. I have wireless so I can not on the internet. I get the error "this computer has no network cnfigured and installed wireless card." When before I restored it the computer with the CD of operaiting, there was no problem of wireless connection. Help, please.

  Manjeet

  The system detects the card wireless at all?

  Hold down the Windows key and press 'R' at the same time. Type "devmgmt.msc" (without the quotes). Check if you can at least see the wireless network card.

  Or key Windows press "R", type "ncpa.cpl" (without the quotes) and see if you can see it there.

  You can also try to go to the Dell website and lifting your system via the number of Service Tag (XXXXXXX) found either on the roof of your system, or by the series at the rear or bottom tag. Here you can try to download the drivers for WLAN card and install from there.

  Just wondering if his work even at this point.

• Satellite Pro U400 (XP pro) cannot connect to the wireless network

  I got a U400 straight out of the box. I installed XP pro through the disc of recovery without any problem, except that I am not able to connect to the Wi-Fi here. (Other devices connect very well so the problem is at the end of the laptop) I tried to update via windows update (SP3) via a wired LAN connection but still the same problem. Other posts here have any suggestions for downloading new drivers from realtek. All of the solutions presented do not work for me. Anything else I can try?

  I am able to see all the wireless networks that are available in the range and may try to connect (provide the WPA password) but after watching the "preparation to connect" screen for a while he seems to abandon without reporting any error

  Hi guys

  First check if you are using the latest version of the BIOS.
  Second, clear all options of the router WLan security (filtering by MAC address, Firewall, encryption of WLan, etc.) and try to establish the WiFi connection.

  If you're going to succeed the problem is certainly related to the encryption settings
  Step by step, activate the settings and set up the router again.

  Good luck

• Avoiding PC not allowed to connect to the wireless network

  AA: For wireless in our establishment, we have access Points on all floors that are in turn connected to the main server PC.
  When I opened the "wireless network connection state", click 'Wireless properties', then select 'Security', it shows the following:
  Security type: no authentication (Open)
  Encryption type: WEP
  Network security key *.
  When the "Show characters" checkbox is selected, it shows the "network security key.
  Is it possible that this security key can be hidden and therefore not visible at all. This avoids computers are not allowed to connect to the network.
  All PCs are loaded with windows 7.
  BB: All PC's are connected WIFI and their IP 192.168.1.100 to 120 with the subnet mask 255.255.255.0 range
  I need to connect some of the connected WLAN PC also by a connection to the local network for networking with a Satellite Communicator for internet connection.
  Setting regarding address LAN IP for the PC, I can give them the same IP from 192.168.1.121 to XXX or if IP address
  address be 192.168.0.xxx
  Adv. kindly

  Change in WPA2.
  Put a password on that isn't easy to guess and is greater than 8 characters.
   
  The security key you are watching is on your computer - you have entered it or allowed him to be registered.  Except if you give someone access to that computer (or a similar) they will not be able to get to this part of the system to see what you see.  If you give people access to the use of these systems, do not give them administrative access - they must only use computers as * users *.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite A30 - does not start after the RAM to level

  Hello

  I recently installed a crucial for memory
  my laptop, which is a Toshiba Satellite A30. However, when I try and
  restart the laptop, he tries to restart the fan turns on then turns off with a beep sound and this is not
  even to get to the Toshiba start screen.

  The memory I installed is 1 GB, 200-pin SO-DIMM, 128 X 64, DDR 333, CL2.5, part number CT12864X335.

  "Memory module PC2700 DDR 1 GB, 200-pin SODIMM

  CT12864X335
  
  
  * Size of the module: * 1 GB
  * Package: * 200-pin SODIMM
  * Function: * DDR PC2700
  ' * Features: * DDR PC2700 • CL = 2.5 • unbuffered • NON-ECC DDR333 2.5V • • • 128Meg x 64 •.

  I have
  took out and put back the old memory and the laptop boots
  normally and is OK, I even tried to put the memory in different
  slot machines, but it still has the same problem.

  This suggests that memory is faulty, as bought crucial memory must be compatible with my laptop?

  Thanks for your time,

  You have this problem if you use modules or only the new module?

  If you only use the new module, the case is clear. The new module is defective or is not compatible with the laptop.
  I think you should get back on the computer dealer and request a new. Maybe you can get a Kingston module because I have only good experience with this production.

  If you use both modules, they are not compatible. You should only use the modules with the same specifications.

• Satellite P20 does not see my router?

  Outside what is my 1st post, I am new to 'Wireless '. I thought all I had to do was flick my wireless light up, but no!
  My Mac connected instantly partners, and my laptop will not. I am trying to establish a connection with a Siemens Gigaset SE551 (which was given to us by our service provider).

  I tried all the instructions on a manual gave me more, I ran diagnostics etc. It's probably something really stupid that I forget... can anyone help?

  I have goggled a bit and discovered that the Siemens Gigaset SE551 router supports only the standard WLan 802.11 G.

  Please check what WLan standards are supported by you card Atheros WLan internal.
  We must define and support the 802.11 G, if you want to communicate with the router.

  As far as I know, you can see these settings in the WLan card properties.
  The properties you can find via-> made Device Manager right click on the WLan card-> properties

  As you have already said, you are a beginner then maybe you should ask someone with more experience WLan for assistance.

• Drive CD/DVD of Satellite A30 does not work correctly

  I have a satellite A30 - 921, but for some reason any cd/dvd stopped working. It is said in the folder Drivers 'driver corrupted/missing. (Error code 39). It will not back down or update either. Do I have to download the driver (this is Toshiba dvd - rom SD-R6112) new & if so, how/where? I can't use the installation or recovery disk as it will not read the drive. Any ideas pls.

  So, you mean that your CD/DVD drive is faulty and you can't read or restore your system.
  To download drivers, you should take a look here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Otherwise I suggest you bring your machine to a service for a hardwarecheckup partner. If your drive is actually defective, then it must be replaced.
  If you need help to find a service partner, then click on this link to find the closest of the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them