Satellite A30: Error BSOD during Vista installation

Hello
I tried to install Windows Vista on my Toshiba laptop (Satellite A30).
After booting from the CD to install, in 1 minute, I get the following blue screen error message.

"The BIOS in this system is not fully ACPI-compatible. Please concat your
system for an updated BIOS to update vendor. Technical information: * STOP: 0x000000A5
(0 x 0, 00000011 00000007, 0xFFD0D010, 0x0100000E) »

I searched in Google and Microsoft Sites on this problem and I found that the problem of ACPI and it may be one of this thing:
--------------------------
(0 x 000000011, parameter 2, parameter3, parameter4):

The system cannot enter ACPI mode. There are several reasons for this, including:
The system cannot initialize the AML interpreter.
The system does not find the descriptive table of the root system.
The system cannot allocate a critical driver.
The system cannot load the descriptive table of the root system.
The system cannot load device descriptor blocks.
The system cannot connect to an interrupt vector.
The SCI_EN (System control interrupt enable request) cannot be set (see 0x00000001).
The of ACPI Table checksum is incorrect.
ACPI is a hierarchical organization of tables, each relying on the other to define the full functionality of the system and each device in the system. ACPI starts by looking for the Description of the root system table, which points to the next table, which points to the next table, and so on. Usually, the error 0 x 000000011 occurs because as these tables is damaged or missing.
-----------------------

The BIOS has date of May 2004.
BIOS type: Phoenix
BIOS date: July 22, 2004
BIOS ID: Phoenix NoteBIOS 4.0 release 6.0
BIOS OEM: V1.80
Chipset: Rev. Intel 3580 2

It's the last BIOS availabel to the Toshiba support site.

Is there a way to update ACPI in the bios or disable this error?

Any help would be appreciated to greately.

Thank you
Algurashi

Hello

are you sure that you have installed the good bios from this machine? It could be, this bad bios downloaded you´ve, then the system does not work because of a bad bios.

Just do the following: display the model number of your machine and I will guide you towards the good bios version, maybe we can solve your problem.

See you soon

Tags: Toshiba

Similar Questions

  • Satellite A30 - shuts down during the installation of recovery or FDISK

    I have a Satellite A30 and I wanted all off it delete and start from scratch.

    Turned back with disc 1 CD product recovery, started well I was prompted to insert disk 2, it does well to about 80% then erased screen, then got the message "invalid partition table". I tried again and same thing happened. Connected FDISK back and chose option 1. 'create a DOS Partition or logic back drive' and the laptop stops. I put the startup option for no network or HARD drive CD player. At startup without inserted discs, I get the following. PXE - E61 madia tset failure, check cable.
    PXE - m0f: exit PXE ROM then freezes.

    Anyone have any ideas?

    I'm not sure at 100%, but from your description, I think that HARD drive get in trouble.
    How pxe message shows that means laptop can not find device bootable and as last it will boot from LAN.

    If possible, try to get a new HARD drive and check if the recovery procedure completes successfully. Old IDE hard drives are not more expensive. To test you can also use a used purposes, but of course has no HDD vice.

  • SATELLITE A30 ERROR! AFTER THE INSTALLATION OF RECOVERY DISKS

    INSTALLED BOTH DISKS AS MANUAL... GET THE ERROR MESSAGE... AT THE END OF DISC 2. CAN FIND NO WAY OUT OR FOLLOWING THE INSTALLATION... REMOVED DISC SEVERAL TIMES AND BEGAN THE PROCEEDINGS WITH THE SAME RESULT. NO ERROR; MESSAGE 437... ; CANNOT READ THE FILE... LOADS OF OTHER WRITTEN IS ALSO ON THE SCREEN... I THEN PRESS ESCAPE; AND HE LOOKS LIKE HE NEEDS A CASE NUMBER? NOW I REMOVE THE DISC; I CANNOT START THE SAME PROCEDURE TO NEW NOTHING WORKS ON PC...
    DISKS CAME WITH THE PC AND I'VE USED THEM TWICE MORE EASILY
    LAPTOP CODE A30 (PSA30E) 14 OLD WORK OK SOMETIMES SAID HE WOULD HAVE TO CLOSE BECAUSE THE GENERIC HOST HAD ENCOUNTERED A PROBLEM... RECOVERY DISKS ARE NOT SCRATCHED CAN ANYONE HELP?

    Hello

    upgrade your laptop with a special as material upgrading of RAM or else!
    It may be that an upgrade of hardware are problems when you use the recovery of th disc!

    Alternatively, you can try to reset the default BIOS settings.

    Sammy Bye

  • Satellite L500-164 - BSOD during XP installation

    Hello.

    I installed Windows 7 Professional 64 bit and everything was working fine... no probs. But now I want to install Windows XP (32-bit standard edition) on another partition, but it does not work?

    He gets in the installation CD, it loads the hardware drivers (the first step), but then, when he must step in partitioning menu or "where you want to install xp" - menu, it gives me a blue screen with information: (it's in German, I try to translate it):

    It has encountered a problem. Windows has shut down to prevent damage to your computer. If you get the error message for the first time, you must restart the computer. If this screen appears again, follow these steps:

    Search your computer for viruses. Cancel the registration of any newly installed hard drives or hard drive controllers. Make sure that the disk is properly configured. Run CHKDSK / F, to determine if the disk is damaged.

    Technical information: * STOP: 0x0000007B (0xFA36063C, 0xC0000034, 0x00000000, 0x00000000)

    I tried a lot of things. I formatted all partitions with a live cd of linux, so now the hard drive is completely empty, however, does not work. I guess that windows 7 (64-bit) caused the problem... but WHAT?

    Can someone help me please? I'm going crazy here... I just want to install xp, nothing more... :/

    Info: My laptop is a satellite L500-164

    Which WXP both of you are trying to install (SP?)?
    You have to load the SATA driver on startup?

  • Satellite L40 - error message during the installation of value-added package

    Hello

    yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

    I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
    I ran as administrator and also tried compatibility mode.

    Help please, thx!
    Constantin

    Hello

    Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
    My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

  • Windows Vista cannot install Itunes. An error occurred during the installation of assembly HRESULT:0 x...

    * Title *.
    An error occurred during the installation of assembly ' Policy.8.0.Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32-policy", publicKeyToken = "1fc8b3b9a1e18e3b" processorarchitecture = "x 86". See Help and Support for more information. HRESULT:0 x...

    I tried everything that you guys mentioned here http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-unable-to-install-itunes-an-error/1099136a-03df-4da4-966c-5a4e56b8f202?page=1&tab=AllReplies&tm=1318189137621 but I do not have file of the registry size limit.

    I also tried these solutions http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/an-error-occurred-during-intstallation-of-assembley/7a2c7cfd-1e0f-40c4-bf96-896134ecda51?tm=1318188952925, but I still have an error during the installation of Microsoft Visual C++ 2008 Redistributable Package (x 86). Error is:

    Error 1935

    "Microsoft.VC80.ATL.type ="win32".version ="8.0.50727.4053".

    "publicToken ="1fc8b3b9a1e18e3b.processorArchitecture ="amd64" '. I tried with Microsoft .NET Framework, but it does not work eather.

    I try 2 days to install itunes without success...

    Any help, please?

    Run the SFC/scannow using the Administrative Mode command prompt

    Attempt to open the CBS log

    Open Run - type the following and press OK

    %windir%\Logs\CBS

    Look for entries stating can not repair and note the file name

    If it does not repeat the steps listed in my previous post to open the CBS log in Notepad

    Startup Repair - analyzes your installation of Windows Vista for issues and fixes

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  • When installing itunes on Windows Vista Home Premium 64 bit I get an error saying an error occurred during the installation of assembly ' Microsoft.VC80.CRT, publicKeyToken...

    complete error message:

    An error occurred during the installation of assembly ' Microsoft.VC80.CRT, publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762" processorArchitecture = "x 86" '. " See Help and Support for more information. HRESULT: 0X8007010B. »

    Is there a possible solution

    I searched through almost every forum support on the internet and still have no solution. I still don't know what is the cause of the problem. Also when you try to update I can't with an error: error 8007010B. There may be a link

    Thank you

    Hello

    see if that helps the difficulty of updates:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

    or repost in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

    iTunes

    Follow the information from apple to the link below

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

    and or ask for their support of itunes

    http://www.Apple.com/support/iTunes/

    Also try the discussions of apple itunes

    http://discussions.Apple.com/category.jspa?categoryID=149

  • Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

    Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

    Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

  • I am trying to install itunes 9 on windows vista. Get error message - error occurred during the installation of Assembly political 8.0.microsoft.vc80.CRT, type version 8.0.50727.403 win 31 policy publicketoken = process 1fc8b3b901e18e3b = x 86 architectur

    try to install itunes 9, get error message - error occurred during the installation of the political Assembly 8.0.microsoft.vc80.CRT, version 8.0 (see above). Am able to install quicktime OK. I uninstalled itunes and quicktime, cleaned the installer, deleted the users temp directory and restarted several times - always get the same error and does not support network for apple, install

    Hello. It worked for me:

    1. download and install 7 - zip;
    2 right-click the iTunesSetup.exe icon and choose 7-zip > 'excerpt from iTunes\ ";
    3. then double-click AppleApplicationSupport.msi and install;
    4 install everything except iTunes;
    5. install iTunes;
    5. it must be .

  • Impossible to install Sketchup 8 error occurred during the installation of mounting political HRESULT: 0 x 80073712.

    Original title: Sketchup 8 error occurred during the installation of Assembly politics

    Everyone has been able to solve a problem with Sketchup 8: error occurred during the installation of the Assembly policy... HRESULT: 0 X 80073712?

    I installed it fine on my old and slow desktop PCs, but now it will not install on my laptop (Vista Business).

    Hello

    I suggest you follow the steps mentioned below:

    Method 1:

    Temporarily disable the software antivirus (and any other security software) and firewall on the computer as a test and try to install sketchup 8 and check if you are to install it.  Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

    Note: make sure that you enable the antivirus software, other security and firewall programs.

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    If the step above do not create new user account and try to install sketchup 8. Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  • Error 1935. An error occurred during the installation of Assembly 'Microsoft. VC80. OpenMPLtype = "win32", version = "8.0.50727.42.

    Error 1935. An error occurred during the installation of Assembly 'Microsoft. VC80. OpenMPLtype = "win32", version = "8.0.50727.42", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is 'c86 '.  This is the error that I get trying to install Visual C++ 2005 Redistributable.

    Could someone point me in the right direction to solve this problem.

    Thank you so much more,

    Tom

    This is the wrong forum.  This forum is for the installation of Windows itself.  Please use the forum Vista programs

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs?tab=all

    or the Visual Studio forum

    http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads

  • Error occurs during the installation of the update.

    I am running Windows Vista and am trying to install an Itunes + Quicktime update. I check the box to the left of the selection and click INSTALL. It passes through the part of the DOWNLOAD process, where a download bar downstairs is green. Then all of a sudden, an error and it says:

    "An error occurred during the installation of the updates. If the problem persists, choose Tools > download only and try to install manually. »

    I'm going to uninstall Itunes to try and reinstall, but when I click on uninstall on the Control Panel, another error occurs.

    "Another program is installed. Please wait until the installation is completed and try to reinstall this software. »

    Im not to install anything well. Help, please

    Hello TXMADELATINO,

    I recommend that you download the Windows Installer Cleanup tool. Click here to download the utility. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    Once you use the Windows Cleanup tool, then download the latest version of iTunes 9.1 and then try and reinstall your iTunes.

    If it does not help, you should contact Apple for support.
    http://www.Apple.com/support/iTunes/

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Many programs does he move not because "Error 1935. An error occurred during the installation of assembly'

    Error 1935. An error occurred during the installation of Assembly

    Microsoft.VC80.ATL.type = "win32", version = "8.0.50727.5592", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is "amd64"
    It of a long story, but basically will not install Visual C++ 2005, Visual C++ 2008, neither will the window update or standalone. Many other programs like Acrobat will not be installed. giving me the same error. I tried clearing the log and restart, tried in safe mode, tried searching. A lot of people have this problem, few solutions.
    I use Vista Home premium x 64 sp2 and a processor intel T5800 (so it's weird that he said processor = amd 64 Architecture)
    Anyway, any help is appreciated. Looked everywhere, looks like I've tried everything.

    Hello

    This problem may occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

    Method 1: Follow the steps described in the article below

    Error message when you try to install an Office program: "Error 1935. An error occurred during the installation of assembly component"
    http://support.Microsoft.com/kb/926804

    Method 2: Also see the article below for measures to address this problem.

    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
    http://support.Microsoft.com/kb/970652

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

  • Error 1935. an error occurred during the installation of Assembly 'policy.8.0.Microsoft.VC80.CRT.version = "8.0.50727.163".Guy = "win32-policy" publicKeyToken = "1fc8b3b9a1c18c3b'.processorArchitecture-'x 86' ' _

    I use windows vista.  I can't install adobe reader, kept getting Error 1606.  I was directed to use Microsoft fixit and today a new error... Error 1935. an error occurred during the installation of Assembly 'policy.8.0.Microsoft.VC80.CRT.version = "8.0.50727.163".Guy = "win32-policy" publicKeyToken = "1fc8b3b9a1c18c3b'-.processorArchitecture 'x 86' '

    Hello

    ·        Who solve this are you referring to?

    ·        Where do you find this new Error 1935?

    I suggest you to check the below link.

    http://kb2.Adobe.com/CPS/403/kb403465.html

    I also suggest you follow the steps mentioned in the article the Error 1606.

    http://kb2.Adobe.com/CPS/402/kb402867.html

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version

    Original title: cannot install Antivirus

    At the configuration stage, it displays Error 1935 in assmbley version Microsoft ATL = 9'0 30739 4148 publickeytoken = iec8b3ba1e18e3b Architexture-86, type = win32, result: ox800736fd process

    Maybe someone can help with this problem.

    Thank you

    Allan

    Hi ADR14,
     
    1. what anti-virus program you trying to install?
    2. you have any other antivirus program installed on your computer?
     
    An unsuccessful installation of prerequisite Windows updates OR packages MSI custom could have on the faulty registry under HKEY_LOCAL_MACHINE\COMPONENTS keys
     
    Step 1:
     
    Uninstall any other antivirus program is installed on your computer, because that to avoid a conflict between two antivirus programs.
     
    Reference:

    Step 2:
    I suggest you visit the below Microsoft KB article provided and run the correction tool and see if the problem is resolved.
     
    Reference:
     
    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
    http://support.Microsoft.com/kb/970652 

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Satellite M40X-309: change of keyboard

    I recently bought a Satellite M40X-309 in the Portugal. I am very happy with my new laptop except for one detail: I'm Brazilian and accustomed to using Brazilians or US keyboard. The keyboard of the Satellite M40X-309 is different and I can not get u

  • Qosmio X 500-can I install a new display driver?

    Hi all Do you know if this version (NVIDIA v280.26) works well on the Qosmio X 500 (PQX33E-04V008FR)? For me after installation I have the blue screen. Thnaks for your helpYves

  • HP DV7: Boot from CD/DVD (Linux installation)

    Hello I have a HP DV7-3150ed with Windows 7. Now, I want to get rid of Windows 7 and install Linux Ubuntu. I have already created a boot dvd with Ubuntu. But now my problem, although I chose my DVD drive in BIOS it does not start from my DVD player.

  • Computer stops responding with a black screen when you start Windows Vista

    Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  • XPS 7100 power

    The unit is a 2010, ran flawlessly until last week. Unit to sleep, won't wake up. Power button orange rest, sound fans slowly. Power supply is good, except for the 12V which is 11V. Is - this low enough to not put the system? And if so, does dell not