Satellite A30 extinction after an error

Similar Questions

• Satellite A30: system32\config\system error message

  Hello

  I have a Satellite A30 and when I start it it displays the system32\config\system error message

  He also says I can try to repair it by starting the original windows using the installation CD installation program.

  Problem is that I don't have any CD or recovery discs that I bought the laptop on ebay 2 years ago

  While the options of do I have that I don't really want to spend the money, put it in repair... the credit crunch and all that!

  Thank you

  Hello

  Hmm I doubt that you can solve this problem without going through any system windows disk or recovery disk.
  It seems that the installed OS is messed up and you last chance would be a new installation of the OS on the MS Windows CD or Toshiba recovery disc.

  Good bye

• Satellite A100-692: after an error of installation of Windows XP Prof blue

  Hello

  I bought a new satellite A100-692 with Windows XP Home OEM as an operating system.
  But when I tried to access the internet using the local area network and a Proxy Server, it does not work.

  I tried everything I knew and even ask some Forums to get a response, but nothing help.
  Then I think it can work when I install Windows XP Prof instead of the OEM Version. Because all Clients in our network work fine with it.

  But when I run the Installer (booting from CD) I get a blue screen with the message that there is a problem with the PCI (pci.sys) driver (after loading all the drivers).

  Can someone tell what I need to do so that I can install another OS?

  Thank you

  PS: Excuse me if my English is not very good ;)

  Hello

  First of all, the blue screen error message may appear due to hardware failure or serious malfunction of software.
  In your case I guess that it s a software issue because on the version OEM pre-installed, everything worked properly.

  In addition I checked the site s driver and it seems that there are drivers for 3 different notebooks to A100. In this case, you should be sure that you use the correct drivers.
  As far as I checked this laptop your A100-692 has PSAA9E number.

  But have you created a CD of drivers & tools before formatting the HARD drive? This option you will find in the assistance of Toshiba.

  However, you can download the drivers from the Toshiba site and here it is very important that these drivers will be installed in the right order!
  The chipset utility must be installed in a first time after all installations of service packs.
  The common modules are also important.

• satellite A30: problems after upgrade to XP Prof

  I have two problems with the A30...

  I bought with XP Home and then upgraded to XP Pro, 1 problem, when I tried to install SP2, the laptop went into a loop of reloading, and the only way to solve was to return back to its original state, so is there a problem with the A30, XP Pro and SP2, do I need a bios update?

  The second issue is with the VGA port, I can't use an external monitor or projector when you use the function/F5 keys use the A30 Inter (r) Extreme Graphics, I asked the store where it was purchased and they said to re - install the driver original from tools and cd drivers, this installation still fails or locks into place

  all ideas

  Hello

  After the upgrade XP Home to Prof. you need to install the drivers and tools in good order! Moreover, some features do not work properly! This order are located on the CD of tools in an html file.

  For the function FN and F5, you need the hotkey utility

  An update of the BIOS is also useful to do!
  After that the system could work.

  CHIS

• Satellite A30: Error BSOD during Vista installation

  Hello
  I tried to install Windows Vista on my Toshiba laptop (Satellite A30).
  After booting from the CD to install, in 1 minute, I get the following blue screen error message.

  "The BIOS in this system is not fully ACPI-compatible. Please concat your
  system for an updated BIOS to update vendor. Technical information: * STOP: 0x000000A5
  (0 x 0, 00000011 00000007, 0xFFD0D010, 0x0100000E) »

  I searched in Google and Microsoft Sites on this problem and I found that the problem of ACPI and it may be one of this thing:
  --------------------------
  (0 x 000000011, parameter 2, parameter3, parameter4):

  The system cannot enter ACPI mode. There are several reasons for this, including:
  The system cannot initialize the AML interpreter.
  The system does not find the descriptive table of the root system.
  The system cannot allocate a critical driver.
  The system cannot load the descriptive table of the root system.
  The system cannot load device descriptor blocks.
  The system cannot connect to an interrupt vector.
  The SCI_EN (System control interrupt enable request) cannot be set (see 0x00000001).
  The of ACPI Table checksum is incorrect.
  ACPI is a hierarchical organization of tables, each relying on the other to define the full functionality of the system and each device in the system. ACPI starts by looking for the Description of the root system table, which points to the next table, which points to the next table, and so on. Usually, the error 0 x 000000011 occurs because as these tables is damaged or missing.
  -----------------------

  The BIOS has date of May 2004.
  BIOS type: Phoenix
  BIOS date: July 22, 2004
  BIOS ID: Phoenix NoteBIOS 4.0 release 6.0
  BIOS OEM: V1.80
  Chipset: Rev. Intel 3580 2

  It's the last BIOS availabel to the Toshiba support site.

  Is there a way to update ACPI in the bios or disable this error?

  Any help would be appreciated to greately.

  Thank you
  Algurashi

  Hello

  are you sure that you have installed the good bios from this machine? It could be, this bad bios downloaded you´ve, then the system does not work because of a bad bios.

  Just do the following: display the model number of your machine and I will guide you towards the good bios version, maybe we can solve your problem.

  See you soon

• Re: Satellite A30 - missing operating system

  Hello

  I have satellite A30, who, after turning on yesterday, it happens with the toshiba with F2 & F12 screen then goes black with "missing operating system" and a cursor flashing at the end.

  I have 2 product recovery discs and a disk tools and utilities

  I loaded the 1st recovery disk and it gave me 3 options

  1 recover hard whole donot disk that I want to do what I have a lot of data and images on the disc that I didn't lose.

  2. the expert recovery mode I peeked to & it looks like my data is still on the drive but not knowing how to retrieve

  or exit 9

  Please help can thank you julian

  Post edited by: julian.ward1

  > I have a lot of data and images on the disc that I didn't lose

  I have bad news boyfriend. The message missing operating system means that the laptop can not find the operating system on the HARD drive. And do you know why the laptop can not find the OS (operating system)?
  Because the HARD drive is DEAD!

  I had the same behavior, 2 years ago. My 4 year old HARD drive was dead. It was an accident of the head and I lost all my files :(

  But fortunately, I created backups on CD so I could restore my photos and my mp3.

• Satellite A30: Does not recognize USB devices.

  My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

  However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
  Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

  Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
  Could you please help me?

  Thank you!

  Hello

  If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

  On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

  USB port: I found a useful paper on this topic:
  http://support.Microsoft.com/kb/873169/en-us/

  Good bye

• Re: Satellite A30-203 - where to get the Microsoft Works 7.0

  Had to recover the Satellite A30-203 due to errors on the hard disk through recovery cd
  Now, I found that works 7.0 microsoft is not anywhere on my computer while it was preinstalled - specs says - ready-to-go-works 7.0.

  Return of any ideas where I can get it? It's somewhere on the CD of tools and utilities? Thank you!

  Hello

  I think that this demand was a part of the image of preinstalled Toshiba.
  If you want to get that back you will need to use the Toshiba Recovery disk, which was supplied with the laptop.

  See you soon

• Satellite A30-514: problem of USB after you installed Windows XP SP2!

  I have a satellite A30-514. I clead the HARD drive, reinstall the software from the recovery CD I got with the PC.
  After that, I launched Windows updates and installed SP2.

  But now my USB only recognizes the mouse and nothing else, when I try to connect a device told me that there was an error on the data and the installation cannot last. I tried reinstalling the driver from chipset from the CD, but nothing happened.

  Hello
  Service Pack 2 does not have hardware redetection of embedded devices. I have the same problem on my S5200 and I just refresh the Device Manager, and after that, it was all right. So, try this one.

• Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

  I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

  The error number (11122) cannot load the bitmap file. Height max = 100

  The hard drive has now been deleted and I can't sent this message to reformat.

  Can someone help me on this please.

  Hello

  Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

  Have you noticed a similar problem before?
  Are you using the original disk or some copy?
  Is there a problem with the HARD drive?

  Please do a little bit more about these things.

• Satellite A30 921 stops after 10 minutes

  I am the owner of a Satellite A30 921, but it stops after 10 minutes.
  I tried to change the settings for toshiba power management, but they will not work any ideas?

  The laptop turns off automatically without display of error messages?
  This can be caused by an overheating problem!

  How old is your laptop and you clean the cooling fans in the past?
  If this isn't the case, I recommend you this doing.

  To clean the fans, you can use the jet of compressed air that can be bought in most computer stores.
  The problem is that dust and debris inside of the laptop prevents cooling modules works properly, and so the temperature increases to a higher level. This leads to the farm automatically from the bottom.

  In my opinion, fans of cleaning might help with this problem.
  Good bye

• Satellite A30 - after the BIOS update I can not install any OS

  Hey everybody

  I have a problem with my laptop Toshiba Satellite A30 PSA33E. I update my old BIOS and 1.7 and now I have a problem: I can not install any OS on my PC because it stops whenever I try to install. After 50 tests, I installed a Windows SP2, but my PC turns off always.

  My CPU is at 100% after I launch mozilla so I guess my problem is the BIOS. I try to install v1.8 BIOS and is not working and I get an error (not compatible with the installed BIOS)

  Where can I find the 1.3, 1.4, 1.5 ROM BIOS? Can someone help me please?
  THX

  The latest version of the BIOS should not cause this kind of thing. Have reset you the BIOS to its default settings?

  Have you checked the CPU radiator for an accumulation of dust? A can of compressed Air can help remove dust through the vents.

  What was the reason that you updated the BIOS, in the first place? Had previous problems with the system?

• Windows XP cannot be installed on Satellite A30 after replacing the hard drive

  Hello
  you have a problem with my satellite A30 - hard drive has been corrupted (due to accumulation of dust on the cpu!) and I replaced it with a 100 GB hard drive.
  Tried the 'recovery cds', but get an error message 'error #1537 file greater than 4 billion number' and recovery has been abandoned halfway after inserting the third cd. The XP Home operating system does not install completely. Any suggestions?
  Thank you very much for your help, has soon
  NJ

  Hello

  already tried the recovery process more then once? If so, the error appears at the place of installation? You said that you have installed a new hard drive but actually you have formatted the hard drive before you perform a full restore? That would be really helpful, sometimes recovery is suspended because the disk formatted or partitioned before luckily.

  You should really try. One way would be to use the "UBCD4Win' which is a Windows Live CD with really good tools. Format your hard drive with this CD and retry the recovery. Maybe it works...

  Here´s the link to the CD "UBCD4WIn": www.ubcd4win.com ".

  Bye and good luck

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite A30: After 30 minutes standby lights

  Hello
  I have problem with my Satellite A30, I often play games online and my computer should stay on when I am not home... The problem is that the BIOS allows the computer to be on 30 minutes after the last mouse or the last key on the keyboard. Please help I can't quit working just because a game off.

  Needing help

  Hello

  The Toshiba power saver must be preinstalled on the device.
  This utility controls sleep mode.
  Please open the Toshiba power saver and choose profile of power mode is used if the AC adapter is plugged. (full power)?
  Then, go to details. In the properties of full power, you will find the tab called "power saving mode".
  Here, you must change the standby system controller forever.