Satellite A300 - 1 5 ACPI is not supported under Linux

Similar Questions

• Satellite L300-1AQ - Fan switches do not properly under Linux

  For L300-1AQ, the CPU fan is controlled by the BIOS. When you start the Linux machine against the cold, the fan runs at least as it should. But then nothing happens until the critical temperature is reached. At this point, the CPU fan going at maximum speed and stays there even when the air coming out is still cold. So the only way to make the rotation of the fan down once again is to restart... The startup parameter "acpi_osi =' has no effect."

  This isn't a hardware problem, because the fan works well under Windows: slow and steady rotation up in States somewhere between min and max. After a few seconds slow and steady to the low towers.

  This could be a roadmap dsdt buggy, which affects only Linux.

  Problem is that Toshiba doesn't support this model of laptop for Linux and there is no tool available as Toshiba Power Saver for Windows power management.
  Try visiting some Linux forum and discuss it.

  On Linux forums, you will find the most useful information or people who might be using the same specifications with the same distribution of Linux.

• Satellite M40-129: PCMCIA card does not work with Linux

  I have D-Link DWL-G650 with Atheros Chipset that is supported under linux (madwifi). But if I boot Linux map is not found. I tested the card with a Fujitsu Siemens laptop and it worked out of the box!

  No idea why it doesn't work with my M40-129?

  Hello

  As you know Toshiba doesn't support Linux and there is no Toshiba drivers for the Linux operating system, but I was able to find this page useful Toshiba on laptop with Linux configuration:
  http://newsletter.toshiba-tro.de/main/

  You must check the machine OS compatibility and other areas.
  I m you will find many useful tips.

  Good luck

• All-in-one Deskjet 4535: Deskjet 4535 AIO - Scanner function not supported in Linux Mint 17.3?

  I just bought the all-in-one Deskjet 4535. As I could not set up in Linux Mint 17.3 using hplip 3.15.2 and hplip-gui (it wouldn't appear in the peripheral installation dialog box), I used the utility printers (system-config-printer) and configured through CUTS. Even then, I was forced to use the driver 4510, as a driver of 4530 series does not seem to exist.
  After having done that, I can print it, but I can't use the "Simple Scan" scanner or any other utility to scan.
  I also tried to detect the network with xsane Analyzer, but it would not detect it.

  The only way to use the scanner is via the web interface, the all-in-one offers fortunately.

  Is there something else to try? The 4535 is supported under Linux or am I out of luck?

  Well, I went to hplip.sourceforge.net and I should have started with it in the first place. I solved the "problem" in downloading and installing the latest version of hplip that supports the 4535 entirely. The repo of Linux Mint has an outdated version of hplip and 4535 needs at least version 3.5.11 to work properly. Use the latest version fixed it immediately.

• Error when you try to run Quicken 2011: this program is not supported under XP

  Win XP pro - Quicken 2011

  I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

  For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
  Most Microsoft Valuable Professional

• Satellite A300 - LED multimedia keys do not work if iTunes is reduced

  Hello

  I own Satellite A300 - 1 9 (PSAJ4E).
  Is it possible to let the LED buttons multimedia "Play/Pause", "RW" and "FF" to work even if iTunes is reduced to a minimum?
  Atm because they work only when I actually work in iTunes and the moment where I reduce iTunes taskbar it blocks for play/pause, etc!

  Thank you

  Jonas

  Hello Jonas

  I don't use iTunes and cannot comment on the functionality of the buttons with iTunes but I know it's Toshiba don't offer notebooks with pre-installed iTunes and these buttons are, by default, designed to work with Windows Media Player.

  You can use these buttons with other players, if possible, but Toshiba does not support the features with any other third party application. For example, I use these buttons with Winamp and everything works perfectly.

• Satellite A300 - 27 X - Wireless is not installed

  Hello!

  I bought a Toshiba A300 x 27 the last day and I cannot connect to my wifi network as the wireless device seems to be uninstalled.

  When I go into Device Manager, I see 'controller Ethernet", with a yellow exclamation point listed under 'other devices '.
  I downloaded some drivers of your wireless download page. Problem is that I don't know what wireless hardware is inside this laptop, so I don't know which driver I excactly must download and install. I tried a few, but those who did not.

  I had vista 32 bit installed.
  Sorry for my English.

  Hello!

  You use the factory settings or you have installed your own version of Windows?

  On the Toshiba site, you can search your model and then download the driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know, the Satellite A300-27 X is equipped with an Atheros card or Realtek WiFi but you can check it with the ID of the seller as Akuma has suggested.

  And don t forget WiFi must be enabled with the hardware switch on the computer laptop and FN + F8.

  Good bye

• Satellite A300-1HV: light button does not work

  Hi guys,.

  I recently bought a Satellite A300-1HV, and while that in the store, the salesman showed me it was possible to turn off the light behind the function/media at the top of the keyboard buttons. It seems to do by simply pressing the first button (the mute button).

  When I got home I tried several times, and he did in fact machine do what I expected (i.e. off lighting). The manual describes the first button under the button "Mute or LED power. Later that night, I tried the button again once, but this time it acted as a mute button and either turns off the lighting. In addition, the second button (CD/DVD) no longer seems to work at all, although it lights up when you press.

  I tried the Toshiba Assist software and am able to manually turn off the lighting, but the 'Toshiba button Support' seems to have no effect on buttons. I guess this would allow me to set up manually a program runs when I press one of two buttons, but no matter what I ask it to run, it does nothing.

  It's as if there is a piece of software that should be run, leading the keys, that I do not have (or at least no longer have).

  Any ideas?

  Hello

  You can enable this back in the BIOS.
  You can access this menu by pressing the F2 key when turned on the machine.

  Select the Advanced section and turn on LED lighting.

  See you soon

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Re: Satellite A300-234 - product key does not work with another disk the

  Broke the new Satellite A300-234, flied Windows Vista. I did not the backup copy of the system. At the system from a disk of another laptop Toshiba A200-23d.

  The key away. What should do?

  Hello

  The point is that the product key from the underside of the laptop can t be used with another drive in Windows. It s just for the preinstalled OEM version and doesn t work with other versions.

  Normally you n t have to enter a product key if you are using the Toshiba recovery disc because it contains a picture of the factory settings and is different from a disc of Microsoft Vista.

  Anyway, as said Akuma you can order a new drive Toshiba Recovery directly.
  The another model of laptop recovery disk will not work because the hardware is different.

  Good bye

• Satellite A300-1GN - media buttons do not work with Win 7

  Hei

  I installed windows 7 to my Toshiba satellite a300 1gn, short model No.: psagce and some illuminated media buttons do not work.

  I have the last drivest but still nothing. first button is expected to control the lighting of media buttons, touchpad and Satellite logo.

  second button is expected to open media player or something like that. the other front buttons work fine!

  Could someone helt solve me my problem?

  Hi mate

  Have you installed the VAP (value added package)?
  This package contains the necessary application that controls the media keys!

  Please check European Toshiba driver page for this package and install it!

  Welcome them

• Satellite A300-177: XD cards are not recognized

  I have a laptop Satellite A300-177 that has developed a problem with the built in card reader. It will read all types except xD Picture card memory cards.
  When inserted pings of laptop because it recognizes the card but no 'Open file' box appears as it does with other cards.

  If I find all the drives through "My Computer", it is listed as a removable drive, however when I double click on the drive it asks me to insert the media on the way I have.
  Ideas please

  Rick

  Hi guys

  Found this thread and point out tips.
  First of all, you must make sure that you use a compatible XD.

  It would be interesting to know, how big is your xD card?

  As I know the card Satellite A300-177 reader supports the xD picture cards up to 2 GB.
  See your user manual for information on supported cards.

• Satellite A300-1IH: TrueSuite Access Manager not preinstalled

  Hello

  I bought a Toshiba Satellite A300 1IH and in the user manual, I read about TrueSuite Access Manager but I have not found installed on the pc.

  Why?

  You have a fingerprint on your laptop?
  I doubt that this and that is why the TrueSuite Access Manager is not installed on the A300-1IH.

  Only portable computers with fingerprint function (there are various notebook series) are pre-installed TrueSuite Access Manager.

  I think I could bring a precision ;)

• Satellite A300 - 1 FG psag4e does not read the recovery DVDs

  Hello

  Sorry for my English, I m French.

  I bought a Toshiba Satellite A300 - 1 fg and I burn the dvd of recovery before you installed XP.

  And now the first DVD cannot be read correctly and I can't restore my laptop for sale
  (the fan is too loud, media keys do not work with another player WMP... I am not satisfied with this laptop)

  I am looking for the most possible to send me a copy of the DVD please.

  THX

  Best regards

  Hello

  Try copying this DVD of recovery on the other computer, and then try to boot from the burned DVD.

  By the way; Media buttons can be use din WinAmp. You should enable the option in the settings of WinAmp. The fan is not strong and cooling parameters can be changed in the settings to save energy.
  Here are some small tips ;)

• Satellite A300 - 15 d-battery will not be charged

  I have the Satellite A300 - 15 d. The problem is when I plug in the power adapter for the laptop battery icon become (undetected) what is the problem?
  Note: This battery is new and the charger not charge this battery. Also, when I plug-out the bifurcation of computer charger after a few seconds.

  Please help me on this problem...

  Thank you best regards &,.

  Dr. Ahmed

  Hey Buddy,

  I put t know why you have a new battery, but what happens if you try to load the battery. It work?

  In other words, it s a bad battery or the perception of control over the work of mainboard doesn t.