Satellite A300 - 16L - Vista will not repair

Hello

I have a toshiba satellite A300 - 16L. And it must recover Vista.
But he'll do.
I tried the F8 key during startup, but that foesnot give me the recovery menu.
I tried the solution key 0. But this does not work either.

It remains startsup windows in a recovery status. And ends with a message (in Dutch): "Kan geinstalleerde niet het programma starten. Klik op OK als u wilt uitschakelen computer.

I do however can start with a knoppix cd and see the entire disk. And I could save almost all the data.

Can someone help here?

eyes of Jan

You have created DVDs of recovery following advice in the document s user manuals?
If Yes use this support to reinstall the original Vista recovery image.
Is preinstalled original Toshiba Vista or your own installation?

By the way: I have the same machine and I use Win7 32 bit. It works perfectly on the A300.

Tags: Toshiba

Similar Questions

  • Satellite A300 DVD tray will not open and cause high CPU utilization peaks

    Hello

    I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):

    DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.

    When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.

    I replaced Win7 32-bit with a 64-bit version and the problem persist.

    Help, please. Thank you.

    I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.

    Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.

  • Satellite A300-1J1 - Vista does not start, a lot of corrupted files

    My PC (toshiba satellite A300 1J1) suffered some random freezes for the past month. A few days ago it froze so I restarted and it could not start. He got as far as the scrolling green bar under the name of microsoft and then progress any more. I tried to start it in all different modes but without prevail. I tried to do a system restore, but it can't find any restore point, or all the files to reset to factory specifications.

    The hard drive works as I could locate all my files via the command prompt. When I run the check disk tool it says many files are unreadable, so I want to reset the PC but can't due to lack of points on each side of the partioned reset disk.

    My PC came with no recovery disk and I fear that in the past, I accidentally deleted file recovery on the HARD drive. What can I do? will be Toshiba sent me disks so I ask them or I have to wipe the drive and buy windows 7 as a last resort?

    > will be Toshiba sent me disks so I ask them or I have to wipe the drive and buy windows 7 as a last resort?

    No, dude, it won't send you free and you must order for money https://backupmedia.toshiba.eu/landing.aspx you can also install Win copy yourself if you get the windows disk.

  • Satellite L300 - 16L - Vista does not load

    I have a L300 - 16L, and now, it will fail to start.

    When the laptop is turned on, I get two options (can not be sure of the exact text that I don't have with me at the moment):
    (1) start Windows repair
    (2) start Windows normally

    When I choose the second option, I get a blue screen and the failure error code is:
    Stop 0 x 00000024 (0 x 00190444, 0x864d22e0, 0xc0000102, 0x00000000)

    When I choose option 1, I get "the installed program cannot start. Click OK to turn off the computer.

    I downloaded and created a CD to restore Vista from the Microsoft Web site and have run
    Bootrec /fixmbr
    Bootrec /fixboot
    Neither of which solves the problem.

    If I press PF8 when starting, I get several options, including the safe boot mode. However after he was responsible for various files (of which the last is CRCDISK. (SYS), all I get is a black screen.

    Unfortunately, I did not create recovery disks, but no doubt I could select Toshiba HDD Recovery option that appears in the options when I press PF8 during startup.
    However, I think I'll have to copy all my existing data first as this option will wipe away on my hard drive (I guess that I'll be able to copy the data using the Vista recovery CD because it allows me to open a command prompt window).

    Someone at - it other ideas on how to solve this problem before going in the way of HARD drive recovery?

    Thank you
    H

    To be honest, I have to laugh after reading your posts.
    I wonder what you do with your laptop. You must be the expert to ruin good operating system.

    So, if you didn t created a recovery media and if you don't have option to fix my computer when you start advanced boot options (F8) you can't do anything. Just nothing. HDD recovery is useless because without repair my computer option cannot start the recovery procedure.

    What you can do is to install your own Vista or order the original Toshiba recovery media for your laptop model.
    Do you know how to do this?

  • Satellite L30-101 - Vista will not start all I get a black screen

    Hey can any help me please I have a toshiba satellite l30-101 (PSL33E) with windows vista basic hoe

    I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

    Ive triyed al the keys F and all the FN keys to bu that nothing would happen that also, I tried an external monitor and the same thing I got nothing on the monitor is a black screen then when I disconnected the mnitor a blue box would come on the screen saying no video input please attatch cable

    allsoo ive tried running the recovery disc, I put the cd in the CD-ROM drive would begins to spin, but nothing would happen that I tried all the F keys while the disc was running, but still nothing would happen

    could sumone if you please help me

    Post edited by: garethg83

    > I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

    I m afraid the BIOS update has no procedure and therefore the ROM chip has not updated as it should. This is the reason why the laptop can not start correctly.

    I think that it of necessary to reflash the ROM BIOS module Once again, but this can be done only using a procedure of BIOS of crisis.
    As far as I know this can be done only through ASP because there is no traditional BIOS version by download.

  • Satellite A205 with Vista will not start

    Hi, need help.

    Trying to help a friend with his laptop which is not booting. Its an A205 with Vista.

    Machine boots only a blank screen (not blue) with a mouse cursor.
    I tried safe mode and it does the same thing. I tried the Toshiba recovery disc supplied and the same results.

    I even downloaded a separate copy of recovery Vista on the Internet and who doesn't. I'm ready to start from scratch and completely reload the OS, but I can't seem to understand how to do this with the discs I have.

    Any suggestion would be great.

    TIA

    What happened when you start the laptop?
    You can enter the BIOS settings?
    See Toshiba welcome screen?

    If you have a recovery media for this model of laptop, you can try to install it. Your laptop to start press F12 for boot options. Put the recovery media in the optical disc drive, choose the CD/DVD drive and press ENTER.

    The optical disc drive is the first boot device and recovery installation should begin. Please let us know what exactly happens when you try to do.
    Please write about what you see on the screen.

  • Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

    Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

    What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

    start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

    When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

    I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

    An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

    So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

  • Update BIOS on Satellite A300 with Vista 64-bit

    How can I update the Bios on a Satellite A300 with Vista 64 bit.

    There is only one available 32-bit update utility.

    So don t update the BIOS if the compatible version is not available.
    BIOS for Vista 32-bit is not compatible with Vista 64-bit!

    See you soon

  • Satellite A300 - easy (key) does not not after SP2 update

    Satellite A300 easy (key) does not...
    I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

    Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

    Is it supposed to be a driver or something for this?

    Sorry for the bad English...

    Hello!

    A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
    At the end of the story, I had to reinstall Windows :(

    In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

    Good bye

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • Why Vista will not connect to the internet wherever I'm connected with my XP machine?

    Why my computer won't get online wherever I like Xp only

    Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

    Hello

    1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

    2 have you tried all of the suggestions of Fahimulla K?

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    See also:

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

    Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

    Hi JohnHorky,

    Step 1:

    First check and make sure that all physical connections on the computer are correct.

    Step 2:

    Alternatively, you can try to run a Checkdisk and check.

    a. Insert the installation disc.

    b. restart your computer.

    c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

    d. choose your language settings, and then click Next.

    e. in the System Recovery Options menu, click command prompt

    f. at a command prompt, type the following command and press ENTER

    Chkdsk /f /r X: (drive letter)

    Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

    g. press y when you are prompted to check the drive the next time the system restarts.

    h. close all applications and restart the computer.

    Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

    Step 3:

    Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

    I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

    Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Hope this information is useful.

  • Vista will not load after complete reinstallation

    It is a dell laptop inspiron 1720. system was ok before. lost password admin and not a lot of data on mahine. said best is to just do a clean reinstall. Vista will not start after re-installation complete. hard drive formatted and loaded into the partition c: System just hangs up on the black screen with bar across the bottom. using the software included with the purchase. He never asks for product key when loading. No repair or available safe mode. I used the software that came with the device. Help, please.

    Hello

    If the dell recovery software will not properly work, you will need to contact dell

    It's their recovery process

    Here's how their recovery process is supposed to work

    with the disk

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    with their recovery partition

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    Dell support

    http://support.Dell.com/

    Dell Support Forums

    http://en.community.Dell.com/support-forums/default.aspx

  • My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

    My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

    Hi Tinkerbellfancolorado,

    1. When is this last work fine?
    2. Do you receive an error message or error codes?
    3. Recent changes on the computer?

    There could be several causes for this problem.

    Try starting with these methods.

    Method 1

    Step 1

    1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
    2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
    3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

    Step 2

    Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

    1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
    2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. On the Networking tab, click Configure.
    4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Method 2

    Temporarily disable the firewall, and check the status.

    NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Hope that was heloful.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Satellite A300-20 q are not on the tech support page

    Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.

    Hello

    I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!

    This model was released for the Russia market.

    Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.

    Welcome them

Maybe you are looking for

  • Display of a Pages document offline

    I have some documents Pages that I need to read everything offline on long-haul flights and remote locations without 3g or wifi. Is it possible to keep records of the Pages on my ios devices for offline viewing? If it is not a native ios or Pages, is

  • Satellite A300 - PSAGLE - noisy keyboard 1JH

    HY! I bought a Satellite A300-1jhIs it possible, that the entire keyboard sounds very loud when I use it?And keyboards on the left and right side are more than just Middle click keyboards.

  • Accuracy of the PXI-4110 and aid for the supply of the sweep of the voltage-2, 5V to 2, 5V

    Hello I want to know about the accuracy of PXI 4110 DC power. I use 4110 PXI to apply a voltage sweep-2, 5V to 2, 5V with a 0, 5V step using Labview, how can I do?

  • Terminal Services/Remote Desktop connections

    We have problems with our Server Terminal server since last Thursday. It seems that all network clients that are disconnected from the remote desktop applications you after a few hours. Our technology company can't find a solution, except the purchas

  • Difficulties to download Skype. Can you help?

    When I try to download Skype I get a message saying that SkypeSetup [1] is not a valid Win32 application - and when I click on OK, the download stops. How can I work around this problem? Thank you, Richard